What are the reasons for difficult gear shifting in Wuling Rongguang?
3 Answers
Reasons for difficult gear shifting in Wuling Rongguang are as follows: 1. Incorrect installation of the driven plate. 2. Difficult axial movement. 3. Warping of the driving and driven plates. 4. Loose separation lever screws. 5. Falling off of floating pins. 6. Separation lever height too low. 7. Incomplete clutch separation. Additional information on clutch issues: 1. The transmission plate of the clutch pressure plate assembly is deformed due to certain factors. The solution is to replace it with a high-quality original clutch pressure plate. 2. The transmission plate of the clutch pressure plate assembly is deformed for some reason, causing poor separation and resulting in difficult gear shifting. In this case, replace it with a high-quality pressure plate that matches the original car. 3. Due to the very large self-locking force of the clutch gear, it is particularly difficult to shift gears. Adjusting the gear stop lock and clutch cable can solve the problem. Transmission issues: 1. The components in the transmission of a new car have not reached the optimal running-in state, and some gear parts are stiff, resulting in difficult gear shifting. This situation can be resolved after a period of running-in. 2. Insufficient transmission oil. If the transmission parts lack oil or the oil quality is poor, shifting gears will feel stiff. Transmission oil is similar to engine oil and needs to be checked regularly and replenished in time. 3. Transmission failure. It may be due to a stuck transmission module or a certain friction plate, which will affect the smoothness of gear shifting. In severe cases, it may even be impossible to shift gears.
The most common reason for rough gear shifting in the Wuling Rongguang is wear in the clutch system. When you press the clutch pedal and it feels soft, or you experience hesitation or difficulty engaging gears, it may be due to the clutch disc being too thin, causing excessive slipping. Another issue could be inside the transmission, such as damaged synchronizers, which can cause gear mismatch and make shifting feel stuck. Oil quality is also crucial—old or insufficient transmission oil leads to poor lubrication and increased friction, resulting in rough operation. As someone who has driven this type of vehicle, I recommend first checking the oil level and trying a simple oil change to see if it improves. If that doesn’t help, have a technician measure the clutch travel. Long-term neglect can damage more components, so avoid riding the clutch in daily driving to extend its lifespan. Also, adjust your driving habits—avoid forcing gear changes on bumpy roads to protect your investment.
I've seen many gear shifting issues with Wuling Rongguang, often stemming from inadequate maintenance. If the clutch assembly is worn out, such as friction plates or pressure plates, it can make shifting difficult. If the transmission oil hasn't been changed for a long time, it thickens at high temperatures, hindering smooth shifting. Another point is to check the shift linkage or cables, as looseness or rust can also cause stiff operation. I believe prevention is key: change the transmission oil every two years or 40,000 kilometers, regularly adjust the clutch clearance; avoid riding the clutch while driving to reduce burden. These small steps can save big repair costs. Wuling models are practical but not highly durable, so frequent maintenance can minimize trouble.
