What are the reasons for difficult car starting in winter?

1 Answers
AliceRose
07/24/25 4:26pm
There are several main reasons why cars have difficulty starting in winter: 1. Engine oil viscosity issue: The smaller the number before the "W" in the engine oil specification, the better the oil's fluidity in winter. Therefore, it's advisable to switch to oil with better fluidity before winter. 2. Battery problem: Due to extremely low temperatures in northern winters, the battery's capacity may become too low because of the cold environment. When this happens, the battery's activity decreases, resulting in insufficient voltage to start the vehicle, thus causing starting difficulties. 3. Owners should pay more attention to the maintenance of internal engine components during routine servicing, such as replacing spark plugs and ignition coils that have reached their service life. This practice not only helps maintain good vehicle condition but also ensures normal car starting during winter.
Was this review help?
12
0
Share
More Forum Discussions

What are the new regulations for vehicle annual inspection within 10 years in 2020?

Starting from November 20, 2020, non-operational vehicles (excluding minivans) aged between 6 and 10 years will undergo inspection every two years instead of the previous annual inspection. Below are detailed introductions about vehicle annual inspection: 1. Introduction: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. 2. Online Appointment: Currently, both new and in-use vehicles can schedule annual inspections online. Before making an appointment, ensure all violations have been addressed. Additionally, vehicles can only be scheduled for inspection within three months before the expiration of the current inspection period. The appointment is valid for one week starting from the day after the application. If unable to attend, cancel the appointment in advance. Two consecutive "no-shows" will result in being blacklisted from the appointment system, losing access to scheduled inspection services.
17
5
Share

What Causes a Diesel Engine to Lack Power and Emit Black Smoke During Acceleration?

This is mostly caused by incomplete combustion due to uneven or excessive fuel supply to each cylinder, insufficient air intake, poor atomization, or premature injection timing. Under high-temperature and oxygen-deficient conditions in the combustion chamber, the incompletely burned diesel fuel decomposes and polymerizes to form carbon smoke, which is not pure carbon but rather tiny polymer particles. These solid carbon particles react much slower than vaporized fuel, leaving insufficient time for complete combustion and resulting in black smoke emissions. Therefore, it is essential to perform regular maintenance on vehicles during use. Below is an introduction to vehicle maintenance: 1. Introduction to Vehicle Maintenance: Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. Scope of Vehicle Maintenance: Modern vehicle maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other related components. 3. Purpose of Vehicle Maintenance: The purpose of vehicle maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
2
0
Share

What is the solution for Volkswagen electronic parking brake malfunction?

If the electronic parking system malfunctions, it is likely due to an issue with the electronic handbrake, worn brake pads, an electronic system problem, or a battery power supply issue. This must be addressed at a repair shop using a diagnostic scanner to read the fault codes, followed by repairs based on the fault codes. More relevant information is as follows: 1. Function of electronic parking: The electronic parking system is used for temporary parking in stop-and-go traffic. For example, when stopping at a red light, after releasing the brake pedal, the auto-hold function quietly activates, locking the wheels until the accelerator pedal is pressed again, at which point the electronic parking automatically unlocks the wheels. This action is much faster than pressing the electronic handbrake. 2. ESP module: Besides convenience, electronic parking also prevents rollback. Since the electronic parking function is developed from the ESP module, during parking, the ECU uses sensors installed in the vehicle to determine the vehicle's levelness and the torque required for wheel braking, deciding whether to apply braking to prevent rollback. Moreover, the braking force applied by the electronic parking to the wheels is not excessive, just enough to prevent wheel movement, ensuring the vehicle does not lurch forward when the accelerator is pressed again.
17
0
Share

What Are the Basic Knowledge Points of Car Maintenance?

Car maintenance is a highly complex professional skill. Professional automotive technicians need to master extensive knowledge, such as automotive electrical circuits, the working principles of car engines, and the operational mechanisms of transmissions. A car is primarily composed of the body, engine, transmission, and chassis. The body is further divided into the body frame and body panels. Body panels include the front and rear bumpers, front fenders, hood, trunk lid, and doors. Since the roof and rear fenders are welded to the body frame, they are considered structural components of the body. Below are additional details on car maintenance: 1. Front Suspension: In front-engine, front-wheel-drive vehicles, the engine, transmission, and front suspension are mounted on the front subframe. In front-engine, rear-wheel-drive vehicles, the engine and front suspension are fixed to the front subframe, while the rear subframe houses the rear differential and rear suspension. 2. Subframe: The subframe plays a crucial role in the chassis and helps transmit collision forces during impacts. 3. Car Transmission: Transmissions are categorized into CVT, dual-clutch, AMT, AT, and manual transmissions, each with distinct working principles and common failure points.
11
4
Share

Is a Simulation Required for the Make-up Exam of Subject Three?

Whether a simulation is required for the make-up exam of Subject Three depends on the regulations of the driving school, as the simulation test is not part of the official exam syllabus but a rule set by local driving schools. 1. Schedule a make-up exam ten days later: If you fail the Subject Three exam, you can generally schedule a make-up exam after ten days, depending on the availability of slots at your driving school. 2. Relevant regulations are as follows: Article 37 states that each subject can be taken once, and if failed, a make-up exam is allowed once. If you do not take the make-up exam or fail it again, the current exam session ends, and the applicant must reschedule the exam. However, Subject Two and Subject Three exams must be rescheduled at least ten days later. If you fail the Subject Three safety and civilized driving knowledge test, the previously passed road driving skills test results remain valid. 3. Exam attempt limits: During the validity period of the driving skill test permit, the number of scheduled exams for Subject Two and Subject Three road driving skills tests must not exceed five. If the fifth scheduled exam is still failed, the results of other previously passed subjects will be invalidated.
11
4
Share

What Causes Water from Car Air Conditioning to Flow to the Passenger Seat?

When water enters the car, it may flow to the passenger seat. Here are the detailed reasons: 1. Poor quality of drainage pipes: Some drainage pipes are of low quality, prone to aging and loosening, causing the pipes to bend and leading to poor drainage. Replace the drainage pipes promptly. 2. Loose installation of the air conditioning: Over time, the air conditioning may shift, causing the position of the drainage pipes to change and resulting in drainage difficulties. Condensation on the pipes may occur if the insulation material on the pipes is of poor quality or too thin, leading to condensation when refrigerant passes through. 3. Dirty heat exchanger requiring cleaning: If the filter is severely dirty or damaged and not cleaned in time, it can cause the evaporator to deform, preventing water from dripping into the tray in time. Insufficient Freon in the air conditioning system can cause the indoor unit's evaporator to freeze, preventing water droplets from dripping into the water-saving tray. Poor-quality materials or an unreasonable internal setup in the air conditioning system may prevent water from flowing into the tray, causing it to drip along the plastic shell.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.