What are the reasons for car glass not being cleaned properly by wipers?

1 Answers
VonNadia
07/29/25 4:18pm
The reasons for car glass not being cleaned properly by wipers are: 1. Aging of the wiper blades; 2. Corrosion of the glass surface, causing dust to stick to the glass and not be wiped clean. The solutions for car glass not being cleaned properly are: 1. Check for dust and small stones between the windshield and the wiper, and clean them thoroughly; 2. Check if the material has aged, and use fine sandpaper or a dedicated repair tool to polish the rubber strips, then apply lubricant for maintenance; 3. Use dedicated wiper fluid for the wipers. The maintenance methods for car glass are: 1. Use appropriate wiper fluid according to the season; 2. Apply heat-insulating film to the car glass. The functions of car glass are: 1. To shield against wind and rain, and reduce noise; 2. To reduce wind resistance and improve aerodynamics; 3. To protect the safety of passengers in the car.
Was this review help?
18
3
Share
More Forum Discussions

Does the Camry Belong to GAC Toyota?

The Camry belongs to GAC Toyota, and it is a mid-size car launched by GAC Toyota. GAC Toyota Motor Co., Ltd. is a Sino-Japanese joint venture automobile manufacturing company, and the Camry is also one of its main models. In terms of body dimensions, the Camry measures 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. In terms of appearance, the luxury version of the Camry features a large trapezoidal horizontal grille, a streamlined body posture, a lower waistline, and an extended rear roof that increases rear headroom. The sports version adopts a three-layer grille front face, and for the first time, it uses a two-tone body and a 'pure black' cabin design, with a dual-sided four-exhaust pipe design at the rear.
5
2
Share

What does climate mean in a car?

Climate in a car refers to the intelligent air conditioning climate control system, which acts like a smart air conditioning butler. Whether it's summer or winter, simply turn on the climate system, set the desired temperature, and it will automatically cool or heat based on the difference between the outside temperature and the set temperature, providing a more comfortable driving experience for the car owner. The intelligent air conditioning control system features functions such as setting, planning, controlling, statistics, analysis, recording, querying, prompting, and alarming, enabling personalized management of various intelligent air conditioning terminals across different fields. It intelligently activates corresponding programs in real-time according to different needs (such as start time, shutdown time, real-time temperature inside the car, humidity, negative ion content, etc.). Additionally, users can freely set access permissions and utilize the internet for remote monitoring.
14
2
Share

Is It Necessary to Press the Clutch When Applying the Handbrake?

Applying the handbrake does not require pressing the clutch. The function of the handbrake is to park the vehicle, providing secondary braking to prevent the car from rolling when parked. Generally, the handbrake is used when the vehicle is stationary, and it is recommended to apply it when the car is in neutral or the engine is turned off. The handbrake is a specialized auxiliary brake in a vehicle, operating differently from the main braking system. It uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible. In daily parking situations, if you forget to engage the handbrake and the car starts to roll, you should immediately press the brake pedal to prevent any potential hazards.
15
3
Share

Do You Need to Press the Brake When Shifting Gears in a Manual Transmission?

When shifting gears in a manual transmission, you do not need to press the brake. However, you must fully depress the clutch pedal before shifting. The gear lever should be operated with light, quick, gentle, and precise movements. Proper timing is crucial when shifting gears. Before upshifting, you must first accelerate (rev up the engine), and when the speed reaches the appropriate level for the higher gear, shift into the higher gear promptly. When downshifting, you can only shift into a lower gear when the speed drops to a certain value. A manual transmission, also known as a manual gearbox (MT), requires manually moving the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation. Its working principle involves using the shift fork to change the transmission ratio (gear ratio) of the meshing gears, thereby altering the driving torque to suit different operating conditions.
6
3
Share

How to Remove the Universal Joint of Jetta?

Jetta universal joint removal method: 1. Use a jack to lift the front end of the vehicle, place the jack at the front of the frame to ensure stability, drain the transmission fluid to prevent leakage, and install the transmission filler plug; 2. Prepare a container for fluids, disconnect the transmission drain plug, ensure the integrity of the driveshaft assembly by creating reference marks, remove the mounting clamps or bolts to drive the shaft transmission; 3. Remove the driveshaft from the transmission by removing the shackle, secure the needle bearing against impact by taping the bearing cap, stabilize the secondary driveshaft, remove the tape, and remove the bearing from the yoke by removing the retaining ring. Jetta is a car brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. In terms of body dimensions, the Jetta has a length, width, and height of 4501mm, 1704mm, and 1469mm respectively, with a wheelbase of 2604mm. In terms of appearance, the Jetta adheres to the pure Volkswagen design style, achieving a fashionable and avant-garde look with a cool, handsome yet elegant and generous exterior design; the simple and dynamic body lines exude infinite vitality.
6
3
Share

How to Shift Gears in a Manual Transmission Car?

Manual transmission car gear shifting method: Before shifting, quickly depress the clutch pedal fully, then slowly release the clutch pedal after engaging the gear while gradually pressing the accelerator pedal with your right foot. No throttle blip is needed when upshifting, but the throttle blip technique can be used during downshifting to avoid jerking. Many novice drivers experience strong jerking sensations after clutch engagement during gear shifts. This is caused by excessive rotational speed difference between the engine flywheel and clutch disc after shifting. To reduce jerking, the speed difference between the engine flywheel and clutch disc should be minimized. The throttle blip technique during downshifting helps reduce this rotational speed difference after gear reduction.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.