What Are the Reasons for BMW Display Screen Not Lighting Up?

When the steering wheel is turned to the right, which way does the rear of the car go?

When the steering wheel is turned to the right, the rear of the car moves to the right. Here is some relevant information: Observe the surroundings: Pay attention to the surrounding environment, determine whether the rear of the car should move left or right, and find a reference point in the rearview mirror to gauge how much to turn the steering wheel. Adjust the car body: When adjusting the car body, if the rear of the car leans to one side, correct it by turning the steering wheel to the opposite side. Avoid the habit of turning the steering wheel while the car is stationary, as this can damage the vehicle and make steering difficult. If multiple adjustments are needed, remember to turn the steering wheel in the opposite direction just before the car comes to a complete stop during each adjustment. Turn the wheel as much as possible to minimize the need for further adjustments in the next step.

4

3

Share

Does excessive toe-in cause wear on the inner or outer side of the tire?

Excessive toe-in causes wear on the inner side of the tire. Here are the relevant explanations: Causes of uneven tire wear: Wear on both shoulder edges is caused by insufficient tire pressure or overloading. Wear in the center of the tread is caused by excessive tire pressure. Wear on the outer side of the tire is caused by excessive toe-in or camber angle, or bent steering knuckle arms. Wear on the inner side of the tire is caused by insufficient toe-in or camber angle. Methods to prevent uneven tire wear: Regularly check if the U-bolts are properly tightened, pay attention to the maintenance of the tie rods, especially for new trailers, it is essential to inspect the U-bolts and tie rods after the first load or after running 1000 kilometers.

6

3

Share

What Causes the Cayenne's Chassis to Make Abnormal Noises?

There are many aspects to abnormal noises from a car's chassis: Chassis-related causes: Abnormal noises caused by loose or deformed chassis components, tire tread noise, noises from internal components of the engine or transmission, noises from various transmission devices such as the front axle, rear axle (depending on the drive structure), connecting parts, etc., and noises from the front and rear wheel bearings. Maintenance-related causes: There are also abnormal noises caused by human errors during installation, replacement, or routine maintenance, such as improperly tightened screws, interference between components, incorrect positioning, reverse installation, and other oversights or carelessness, which can be very dangerous. Abnormal noises from critical safety components: For example, in the braking system, it could be due to worn brake pads reaching their limit and directly grinding against the disc; there might be chassis noises due to insufficient oil in the power steering system; or noises caused by incorrect actions of actuators (such as in four-wheel drive systems) due to issues with electrical wiring.

4

1

Share

What is the Principle of Torsion Bar Suspension?

Torsion bar suspension principle: The principle of the torsion bar independent suspension system lies in obtaining elastic travel through the surface deformation of tubular materials. One end of the torsion bar is engraved with splines for fixation, and the other end is connected to the balance elbow to achieve vertical displacement. The advantages of the torsion bar are its small size, large dynamic travel (especially after shot peening treatment on the torsion bar surface), and basically maintenance-free under normal conditions, but replacement is very troublesome. Related information: Torsion bar suspension and spring suspension are two completely different structures. Germany was the first country in the world to adopt torsion bar suspension, using a balanced suspension system with bridge springs as the elastic elements.

16

1

Share

How many points will be deducted for not filing a color change film?

If a color change film is applied without filing and is discovered, there will be a fine of 200 yuan, but no points will be deducted. According to Article 56 of the "Regulations on the Registration of Motor Vehicles," if the body color is changed without completing the required change registration, the traffic management department of the public security authority will issue a warning or impose a fine of 200 yuan. The vehicle may be impounded, and the owner may be ordered to restore the original body color. To apply for a change in the body color of a motor vehicle, the following documents must be submitted in accordance with the "Road Traffic Safety Law": "Application Form for Change of Registration of Motor Vehicles." Original and photocopy of the identity certificates of the motor vehicle owner and agent. Original motor vehicle registration certificate. Original motor vehicle license. Pay the fine before changing the vehicle color. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, no change registration is required. Conversely, if it exceeds 30%, filing is necessary, and registration must be completed within 10 days after the color change. Notes on vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to confirm whether the region permits changing the vehicle color using film. If the region does not support this method, filing cannot be processed after the color change, and the film must be completely removed to restore the vehicle's original color. Additionally, according to Article 10 of the "Regulations on the Registration of Motor Vehicles," owners are no longer required to apply in advance to the vehicle management office. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for change registration with the vehicle management office. According to Article 10, registered motor vehicles must apply for change registration with the local vehicle management office in the following cases: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use nature, such as commercial vehicles converted to non-commercial use or vice versa. Change of the motor vehicle owner's residence in or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and indicator lights as required. Other motor vehicles are prohibited from painting, installing, or using patterns, alarms, or indicator lights that are specific to or resemble those of the aforementioned vehicles.

2

Share

Will the Engine Burn Coolant?

The engine does not burn coolant. However, if the engine frequently overheats, the coolant may boil and vaporize, causing a significant amount of coolant to escape through the radiator cap's steam valve, leading to coolant loss. In such cases, it is necessary to identify the cause of the engine overheating and address it accordingly. Vehicle coolant generally needs to be replaced every 2 years or 40,000 kilometers, which is just a reference interval. For commercial vehicles with higher mileage, the replacement interval should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Regularly check the coolant level and top it up if it is low. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, replace it immediately and flush the system. How to determine if coolant is low: Observe the coolant warning light on the dashboard. If it lights up, it likely indicates low coolant, though it could also be due to excessively high engine temperature. Check the coolant reservoir. If the level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Inspect the coolant level markings on the overflow tank. The normal coolant level should be between the maximum and minimum marks. If the coolant is below the minimum mark, it indicates a shortage.

4

2

Share

What Are the Reasons for BMW Display Screen Not Lighting Up?

When the steering wheel is turned to the right, which way does the rear of the car go?

Does excessive toe-in cause wear on the inner or outer side of the tire?

What Causes the Cayenne's Chassis to Make Abnormal Noises?

What is the Principle of Torsion Bar Suspension?

How many points will be deducted for not filing a color change film?

Will the Engine Burn Coolant?

Can a driver's license suspension be checked online?

How many times can you take the Subject 3 test in one day?

Can a D License Be Used to Ride an Electric Motorcycle?

Will points be deducted if caught not wearing a seat belt?