What are the reasons for abnormal tire pressure signal in BYD Song MAX?

What are the effects of changing from 17-inch to 19-inch wheels?

Replacing 17-inch wheels with 19-inch wheels on a car has several impacts: it alters the odometer reading; increases the load on the steering system, potentially causing premature wear; raises the vehicle height, increasing ground clearance, which can disrupt the original aerodynamics at high speeds and lead to reduced stability; increases the load on the braking system, causing brake pads and discs to wear out faster; and directly affects fuel consumption, typically increasing it by approximately 0.5 liters per 10 liters of fuel. After upgrading to larger wheels, the tire aspect ratio decreases, improving visual appeal and enhancing driving stability and lateral support. However, the downsides include increased fuel consumption, and the need to revert to the original setup for annual inspections or ownership transfers. It is advisable to keep the original wheels and tires rather than discarding them. When modifying tires, it is essential to maintain the original wheel diameter and width. The diameter must remain unchanged to avoid affecting the vehicle's fuel consumption and mileage calculations. The width can be slightly increased if necessary, but one must ensure that the steering does not interfere with the fenders when turned to full lock. Increasing width generally leads to higher fuel consumption. For those considering a change, the focus should be on reducing wheel weight, slightly increasing width, and switching to performance tires, as this is the most effective way to enhance performance.

20

4

Share

How to Identify Cylinders 1-6 in an Audi 2.4 V6?

Audi 2.4 V6 engine cylinder identification method: The cylinder closest to the belt is cylinder 1, and moving towards the output end are cylinders 1, 3, and 5 in sequence, while the opposite row consists of cylinders 2, 4, and 6. Generally, with the left bank closest to the belt and considering the car's forward driving direction as the front, the three cylinders on the right side are cylinders 1, 2, and 3, while the three cylinders on the left side are cylinders 4, 5, and 6. The firewall side corresponds to cylinders 1, 3, and 5, and the radiator side corresponds to cylinders 2, 4, and 6. V6 refers to the number of cylinders and their arrangement in the engine. V6 indicates a 6-cylinder engine with a V-shaped configuration, where each cylinder works in harmony, resulting in minimal noise and smooth operation. V-shaped engines have compact length and height dimensions, making them very convenient to arrange. They are generally considered high-end engines and serve as one of the hallmarks of premium sedans, typically installed in mid-to-high-end vehicles.

20

4

Share

What does the car PVC valve mean

Automotive PVC valve is a component in the crankcase forced ventilation system of a car engine, consisting of a valve body, valve, valve cover, and spring. Below is an extended introduction: 1. Working principle: It directs gases from the crankcase into the intake manifold via the PCV valve, with a small amount of air entering the intake manifold directly from the air filter through the PCV valve; 2. Specific uses: This helps prevent phenomena such as icing at the throttle, incomplete combustion, and emission deterioration, while also preventing blow-by gases from entering the atmosphere and avoiding engine oil deterioration.

10

3

Share

What are the differences between 10w40 and 5w40 engine oil?

Engine oil 10w40 and 5w40 have the following differences: 1. Different fluidity: The number before W represents the minimum temperature it can withstand. The smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 2. Different environmental temperatures: Compared with 10w40, 5w40 engine oil can adapt to lower minimum temperatures. Engine oil with a lower number before W can start the engine more easily in cold weather. To determine which one is better, it mainly depends on the driving environment of the vehicle. If the environmental temperature is lower, 5w40 is recommended.

19

5

Share

Does CVT Have Jerking Sensation?

CVT has a slight jerking sensation. It occurs during automatic gear shifting, similar to manual transmissions, caused by the transition between large and small gears. Reasons for jerking sensation in cars: The jerking sensation is caused by automatic gear shifting. In fact, so-called automatic transmissions operate on the same principle as manual transmissions, involving the transition between large and small gears. Therefore, the process of switching between sun gears and planetary gear rings in automatic transmissions is similar to shifting gears in manual transmissions, inevitably leading to a jerking sensation. However, vehicles with dual-clutch transmissions or continuously variable transmissions (CVT) do not experience this jerking sensation. Newly purchased cars may exhibit some jerking sensation during driving due to the tight meshing of the automatic transmission components, but this sensation gradually diminishes and eventually disappears as the mileage increases, typically around 50,000 kilometers. Advantages of CVT: Smooth gear shifting with minimal jerking. Due to the continuously variable ratio of CVT transmissions, the jerking sensation becomes very slight or almost nonexistent. The engine can maintain an economical speed range. Since the CVT transmission ratio is continuously variable and can synchronize with vehicle speed, the engine speed range is no longer restricted by changes in vehicle speed. This is the key difference between CVT transmissions and gear-driven transmissions like AT or DCT. Better climbing performance: CVT transmissions do not experience power interruption issues during climbing that occur in other types of transmissions due to gear shifting, allowing the engine to deliver consistent power throughout the climbing process.

4

2

Share

Can a Car Remote Key Still Work After Being Washed? How to Fix Malfunctions?

Remote car keys that have been washed or malfunction cannot continue to be used, possibly due to circuit failure. Below is an introduction to car keys: Reasons for remote car key malfunction: The car battery is dead, causing the vehicle to fail to receive signals; the remote car key's battery is dead, preventing the doors from being unlocked; remote control failure is due to the presence of high-power radio signals of the same frequency in the surroundings, which prevents the vehicle's signal-receiving device from detecting the radio-encoded commands sent by the remote key, leading to remote control failure, such as the inability to lock or unlock the doors. Interference can come from large outdoor LED displays, wireless callers on construction site elevators, wireless video monitoring equipment, etc. Normally, radio equipment that meets regulatory requirements does not cause mutual interference, but when certain hardware in such devices malfunctions, it can generate multiple continuous radio stray signals, which may interfere with nearby car remotes, causing them to fail. Solutions for remote car key malfunction: If the remote key's battery is depleted, replacing it with a new one will solve the issue. The internal batteries of keys come in different models, so care must be taken to distinguish them during replacement. If there is strong magnetic interference in the surroundings, you can use the mechanical key to open the door and enter the vehicle, then place the key in the emergency start position to start the car. If the remote key is internally damaged or the signal receiver on the car body is damaged, it needs to be repaired at a service center.

15

4

Share

What are the reasons for abnormal tire pressure signal in BYD Song MAX?

What are the effects of changing from 17-inch to 19-inch wheels?

How to Identify Cylinders 1-6 in an Audi 2.4 V6?

What does the car PVC valve mean

What are the differences between 10w40 and 5w40 engine oil?

Does CVT Have Jerking Sensation?

Can a Car Remote Key Still Work After Being Washed? How to Fix Malfunctions?

What does the BMW M package include?

Where is the central locking module located in a 2011 Buick Excelle?

What's New in the 2021 Toyota IZOA?

Does a faulty sensor in the Roewe RX5 affect driving?