What Are the Reasons for Abnormal Noises from the Car Chassis When Driving on Rough Roads?

3 Answers
ReidMarie
07/29/25 2:51pm
Reasons for abnormal noises from the car chassis when driving on rough roads: 1. Loose screws inside the chassis; 2. Loose or worn joints in the suspension linkage components; 3. Aging of the stabilizer bar rubber bushings; 4. Brake system failure; 5. Loose shock absorbers. Car chassis maintenance includes: 1. Regularly checking the oil in each assembly; 2. Timely replacement of worn brake pads. The composition and functions of the car chassis are: 1. Transmission system: smoothly engages or temporarily disengages the engine power with the transmission device; 2. Running system: supports the entire vehicle's mass and ensures the car's movement; 3. Steering system: ensures smooth steering; 4. Braking system: provides the ability to stop the vehicle forcibly within a short time.
Was this review help?
14
3
Share
HaleyRose
08/13/25 7:24am
I've been driving for 15 years and have encountered chassis noise issues several times. The most common cause is aging suspension components, such as leaking shock absorbers or fatigued springs, which produce creaking sounds when driving on uneven roads. My old car used to make terrible noises, and after inspection, it turned out to be worn stabilizer bar bushings—replacing them fixed the problem. Additionally, loose underbody protection panels can rattle, especially as the car ages and bolts rust or protective coatings wear off. Another issue is loose connecting rods or control arm joints, which can cause metallic clunking sounds when driving over rough terrain due to excessive vibration. I recommend having a mechanic inspect the chassis components during regular maintenance to avoid more serious damage from long-term neglect—this saves money and ensures safety. Noise issues aren't just about the sound; they also affect handling stability. Never take them lightly—if repairs are needed, get them done promptly.
Was this review help?
19
4
Share
Expand All
VanEverett
10/11/25 5:02am
As a new driver who just bought my car last year, I was startled when the chassis made strange noises over bumpy roads. After researching, I learned this is quite common: suspension components like shock absorbers or springs can cause noises when faulty; loose or worn stabilizer bar mounting points may produce squeaks; improperly secured underbody panels can rattle on rough roads. I also discovered that unbalanced tires or steering linkage issues can introduce unwanted sounds. This made me more attentive—I now listen for unusual noises before every drive. My advice to new drivers: don't wait until it's serious, get professional inspection early. Chassis noises affect handling, and safety comes first. Pay attention to your car's daily condition—spending on maintenance is better than dealing with accidents.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What is the correct method to start an automatic transmission car?

Correct method to start an automatic transmission car: 1. After sitting in the driver's seat, press the start button directly; 2. Press the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake, and you may choose to warm up the car while stationary; 4. Press the brake pedal again and shift to D (Drive) gear; 5. Release the handbrake and slowly release the foot brake to start moving; 6. Apply the accelerator smoothly according to road conditions for safe driving. An automatic transmission car does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Generally, an automatic transmission has six gear positions: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). The automatic transmission uses a planetary gear mechanism to shift gears automatically according to the degree of accelerator pedal pressure and changes in vehicle speed.
14
3
Share

How to Press the Clutch When Shifting Gears?

To press the clutch when shifting gears, use the ball of your left foot with the heel as the pivot point. First, press the clutch pedal all the way down, then engage the corresponding gear while lightly pressing the accelerator. Simultaneously, quickly lift the clutch to the semi-engaged position. Once you feel the clutch engage, you can fully release it. The clutch is located inside the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. Its function is to allow the driver to properly operate it, enabling the indirect engagement of the clutch's front and rear parts for smooth starting.
3
1
Share

How to Deal with Spark Plugs Soaked in Engine Oil?

The method to deal with spark plugs soaked in engine oil is: use paper to wipe off the oil on the spark plug, gently sand the electrodes a few times with fine sandpaper, or slightly burn the electrodes of the spark plug on the flame of a gas stove or alcohol lamp. The function of a car's spark plug is to discharge the pulsed high-voltage electricity generated by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to ignite the gas in the cylinder. Methods for maintaining and servicing car spark plugs: 1. Clean the dust and impurities around the spark plug, usually by using compressed air or a fine soft tube to blow them away; 2. When removing the spark plug, ensure the engine is in a cold state and never disassemble or install the spark plug while the car engine is running; 3. After removing the spark plug, protect the installation port to prevent impurities or dust from entering the cylinder; 4. When removing the spark plug, use the correct tools, ensure the wrench fits properly, and operate it straight and correctly to avoid damaging the insulating ceramic body.
16
5
Share

What gear should be engaged when parking on a downhill slope?

When parking on a downhill slope, engage the reverse gear before turning off the engine to prevent the car from rolling forward. For parking on level ground, first shift to neutral, apply the handbrake, and then turn off the engine. Engaging a gear utilizes engine braking, where the wheels are connected to the engine crankshaft through gears, so wheel rotation will inevitably drive the engine. The reverse gear, fully known as the reverse driving gear, is one of the three standard gears in a car. It is marked as "R" on the gear console and is designed to allow the vehicle to move backward, serving as a special driving gear. Precautions for reversing on a downhill slope include: 1. Ensure the vehicle is completely stopped before engaging reverse gear; 2. Press the clutch pedal all the way down when shifting to reverse; 3. Maintain slow speed during reversing and avoid pressing the accelerator.
5
1
Share

How to Remove Asphalt Stuck on Tires?

The methods to remove asphalt stuck on tires are: 1. Spray a dedicated asphalt cleaner on the tire, and after the asphalt softens, use a small shovel to remove it, or repeatedly wipe it with a cloth; 2. Use boiling water by pouring it over the asphalt and then scrubbing repeatedly with a brush; 3. Wash the tire with soapy water and scrub repeatedly with a brush; 4. If the asphalt has been compacted over time and adheres to the tread patterns, it needs to be handled at an auto repair shop. The methods for maintaining tires include checking the tire pressure, which can be judged based on the standards in the car maintenance manual, and promptly removing any stones or foreign objects in the tires.
10
1
Share

Which One is the Clutch Pedal?

The clutch pedal is the first stepping point from left to right in the driver's cabin. It serves as the control device for the clutch assembly in manual transmission vehicles. Its primary function is to engage and disengage the clutch between the engine and the transmission through proper operation by the driver. The clutch consists of friction plates, spring plates, a pressure plate, and a power output shaft. When starting the vehicle, the correct operation method for the clutch is to press down the pedal, engage the gear, then lift the clutch pedal until the friction plates begin to make contact. At this point, the foot should pause briefly while simultaneously applying throttle. Once the clutch plates are fully engaged, the clutch pedal can be completely released.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.