What Are the Reasons for a Sudden Increase in Car Fuel Consumption in Winter?

1 Answers
MacAva
07/29/25 10:51pm
Increased car fuel consumption in winter may be influenced by tire pressure. As temperatures consistently drop in winter, tire pressure also decreases. If the pressure drops significantly and is not promptly checked and replenished, the contact between the tires and the ground increases, leading to greater friction and higher tire resistance, which can affect fuel consumption to some extent. Lower temperatures reduce the thermal efficiency of the car, resulting in increased fuel injection. When a cold car starts in winter, the engine temperature has not yet risen, leading to poorer fuel atomization and insufficient concentration of the air-fuel mixture for combustion. To ensure normal engine operation, the fuel injection volume must be significantly increased to provide more combustible mixture. After driving for some time, the temperature rises and fuel consumption returns to normal. The viscosity of engine oil also affects car fuel consumption. In regions with unstable temperatures and significant fluctuations, if the oil is not changed during temperature drops, the viscosity of the oil increases as temperatures decrease, leading to greater resistance. It is advisable to switch to engine oil with lower viscosity at low temperatures during winter.
Was this review help?
13
3
Share
More Forum Discussions

How Long Does It Take to Pick Up a BYD New Energy Vehicle?

The pickup time for a BYD new energy vehicle depends on whether the 4S store has inventory. Here are the details: When the 4S store has inventory: For less popular or niche BYD new energy models, 4S stores usually have inventory. In this case, you won’t have to wait too long—typically about a week. Once the paperwork is completed and accessories are installed, you can pick up the car. Inventory levels vary depending on the region and the size of the 4S store. When the 4S store does not have inventory: If the 4S store happens to have no inventory, they will coordinate with nearby stores to transfer a vehicle, which takes about 10 to 15 days. For some highly popular models where production capacity cannot keep up with demand, the waiting time for pickup may range from 3 to 6 months. If there is a delay beyond the promised time, you can negotiate with the salesperson to cancel the order.
20
2
Share

Where is the fuel tank switch cable of BYD S6 located?

BYD S6 fuel tank switch cable is located under the driver's seat. BYD S6 fuel tank switch position: Pull the switch under the driver's seat of BYD S6, and the fuel tank cover will automatically pop open. The position of the fuel tank cover switch varies for different model years of S6. For the 2011 model, it is located next to the rearview mirror adjustment button, while for other models, it is on the left side of the steering wheel. BYD S6 fuel tank capacity: The fuel tank capacity of BYD S6 is 72L, with 72L being the safe capacity, generally about 10% smaller than the actual capacity. The fuel tank is designed considering the thermal expansion and contraction characteristics of fuel to prevent excessive internal pressure. Overfilling can damage the carbon canister, while underfilling leaves too much empty space in the tank, causing fuel to evaporate and be lost as vapor.
3
0
Share

What is the complete explanation of the Land Cruiser button functions?

The buttons on the Land Cruiser's center console include functions such as high-low speed four-wheel drive adjustment, tank turn, hill start assist, crawl control, central differential lock, vehicle stability control, second-gear start, and ECT-PWR transmission electronic control mode. High-low speed four-wheel drive adjustment function: The high-low speed four-wheel drive adjustment system has two modes: L4 and H4. H4 refers to high-speed four-wheel drive, which is suitable for driving on gravel roads, muddy terrain, snow, and sandy surfaces when activated. L4 refers to low-speed four-wheel drive, which provides higher torque (more power) when activated, making it suitable for off-road climbing, descending steep slopes, and escaping difficult situations, but rarely used for continuous driving. When using L4, it is best to start in 1st gear, avoid shifting to gears above 2nd, and keep the speed relatively low. Tank turn function: When activated, the vehicle controls the left rear wheel or right rear wheel to reduce the turning radius, ensuring the ability to change direction on very narrow roads.
18
0
Share

What is the weight of the XPeng P7?

There are 17 models of the XPeng P7 currently on sale. The vehicle weight ranges between 1890-2060kg. It is a 4-door, 5-seater sedan with dimensions of 4880*1896*1450. In the same class, the Model 3-2022 has a vehicle weight of 1761kg, while the DS9-2021 weighs 1615kg. In terms of power, the XPeng P7-2022 offers four models: 670E+ Wing Edition, 670E+, 480N+, and 670N+. It is equipped with a permanent magnet/synchronous motor and a single-speed transmission for electric vehicles. The drive motor configuration is single motor, all with a rear-mounted layout and rear-wheel drive. Other configurations for the XPeng P7-2022 include, in all or some models, front and side airbags, front/rear head airbags (curtain), ISOFIX child seat anchors, driving assistance imaging, and a rear cross-traffic alert system. It's important to note that the XPeng P7 is positioned as a mid-size pure electric coupe, featuring the latest generation of square battery cells with a rated energy of 80.87kWh and an energy density of up to 170Wh/kg. Additionally, the motor, electronic control, and reducer are highly integrated to form a high-performance three-in-one electric drive system. Compared to traditional dispersed electric drive layouts, the three-in-one system is more efficient, compact, lightweight, neatly arranged inside the vehicle, and more reliable.
20
3
Share

What is the range of the BYD Han EV in kilometers?

There are currently 15 models of the BYD Han available for sale. Among them, the 2022 DM-i Honor/Luxury models have a range of 121 km, the 2022 DM-p 202KM AWD Flagship model has a range of 202 km, the 2022 DM-i 242KM model has a range of 242 km, the 2021 EV Standard Range Luxury model has a range of 506 km, the 2020 EV Extended Range Luxury model has a range of 605 km, the 2020 DM AWD Performance Premium/Luxury models have a range of 81 km, and the 2020 EV Extended Range Premium model has a range of 605 km. The above ranges are based on a full charge and are NEDC officially published data. During daily driving, the current range of the BYD Han can be viewed on the instrument display panel. The range is directly related to the three key systems of an electric vehicle: the battery, electric drive, and electric control. Battery System: The capacity of the power battery directly determines the range. Additionally, excessively high or low temperatures in the battery system can also affect the range. With the same battery capacity, more stable battery temperatures better ensure the range. Electric Drive System: This mainly includes the drive motor, controller, inverter, and reducer. Its efficiency is determined by the ratio of input power to output power. When the battery capacity is fixed, under the same voltage, the output energy is determined by the efficiency of the drive system. Automakers strive to optimize motor and control efficiency to reduce energy consumption and improve range. Vehicle Control System: This primarily coordinates the relationship between the battery, drive system, and chassis brake energy recovery. Under conditions of frequent acceleration and deceleration, the proportion of energy recovery (brake energy recovery) can be dynamically adjusted based on the battery's state and braking needs, thereby improving energy efficiency. In addition, the braking energy recovery strategy of an electric vehicle can directly increase the vehicle's driving range.
15
4
Share

Is the Suzuki Antelope engine imported?

The Antelope engine from 2002 was an imported engine, while the Antelope engines after 2002 are mostly domestically produced. Introduction to Suzuki engines: The Antelope series generally uses a 1.3-liter naturally aspirated four-cylinder engine. This engine has a maximum power output of 67 kW and a maximum torque of 115 Nm. The engine reaches its maximum power at 6,000 rpm and its maximum torque between 2,500 and 3,500 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 3-speed automatic transmission. The Antelope's front suspension employs a MacPherson independent suspension, while the rear suspension uses a double-wishbone independent suspension. The double-wishbone independent suspension is a relatively simple type of independent suspension. Independent suspensions are quite common in vehicles, with the MacPherson suspension being the most frequently encountered. The MacPherson suspension has a simple structure and low cost, featuring only an L-shaped control arm. The double-wishbone suspension differs from multi-link suspensions, offering less comfort and handling compared to four-link or five-link suspensions. However, the double-wishbone suspension is cost-effective, simple in structure, compact, and occupies minimal space. Advantages of Suzuki engines: Smooth and steady power delivery, clear and precise gear shifts, and very fast acceleration.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.