What are the reasons for a sudden failure to start a Bora car?

1 Answers
Mendoza
07/29/25 6:02pm
There are several reasons why a Bora car suddenly fails to start: 1. Symptom characteristics: The starter begins to turn but the rotation speed is insufficient, meaning it lacks power, and later the starter only makes a clicking sound without turning. Low temperatures in winter and forgetting to turn off certain electrical equipment can cause the vehicle to fail to start, especially when used for long periods of short-distance, low-speed driving in winter, which can result in the battery voltage dropping below the rated value, making it impossible to start or operate normally. Emergency solution: If this occurs, please call the service station for assistance, or find another car to jump-start, or temporarily start the engine, after which you must go to the service station to recharge the battery. 2. Symptom characteristics: There is no oil pressure in the engine fuel supply line. This situation often occurs on particularly cold mornings and is caused by long-term dirt accumulation in the fuel line. When the temperature is extremely low, water and debris mix, blocking the fuel line and preventing the engine from starting. Emergency solution: Place the car in a warm environment, and it will start after a while; or use a fuel line cleaning method to completely resolve the issue.
Was this review help?
14
5
Share
More Forum Discussions

How to Remove the Taillight of X-Trail?

The method to remove the taillight of the X-Trail is as follows: 1. Open the trunk and locate the position behind the taillight; 2. Lift the cover and unscrew the bolts with a tool; 3. Remove the entire taillight. Taking the 2021 X-Trail as an example, its body dimensions are: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, minimum ground clearance 208mm, and fuel tank capacity 65l. The 2021 X-Trail is equipped with a 2.0L naturally aspirated engine, with a maximum power of 111kw and a maximum torque of 194nm, matched with a CVT continuously variable transmission.
15
5
Share

What does 'Inspection valid until July 2021' mean?

For exempted vehicles, no endorsement will be made on the supplementary page of the vehicle license. This is the annual inspection mark. Relevant information is as follows: 1. Inspection content: National regulations stipulate that motor vehicles must regularly pass exhaust emission tests, vehicle appearance, lights, brakes, chassis inspections, etc., and obtain an inspection compliance mark without any traffic violation records. All annual inspection dates are based on the registration date on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as 'annual inspection' or 'annual review'. 2. Inspection frequency: Small and micro non-operating passenger vehicles within 6 years are inspected every 2 years, those over 6 years are inspected annually, and those over 15 years are inspected every 6 months.
17
2
Share

What level does the Nexen SH9i tire belong to?

Nexen SH9i tires offer excellent support performance, braking performance, and drainage performance, providing comprehensive assurance for safe driving. Below is relevant information about the tires: 1. Tire functions: Mainly include dry grip, hydroplaning resistance, comfort provision, noise reduction, impact resistance, wet grip, load-bearing capacity, handling ability, average wear, and mileage. 2. Tire cross-section structure: Generally divided into four parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead seals with the rim. 3. Internal composition of tires: The tire interior consists of multiple layers of different materials, including tread pattern, overlay, steel belt, stress absorption rubber strip, carcass ply layer, and inner liner.
8
1
Share

What Causes the Abnormal Noise When Coilover Suspension Goes Over Uneven Roads?

This is a normal phenomenon caused by overly stiff springs. Other abnormal causes are as follows: 1. Interference between components: Due to impacts or the installation of additional equipment, two components may affect each other. Solution: Only reshaping, repairing, or replacing the relevant components can eliminate the interference. 2. Loose bolts or nuts: Long-term driving on poor road conditions can naturally loosen bolts; improper disassembly or installation can damage bolts; insufficient tightening torque or incorrect bolt specifications. Solution: Tighten or replace the bolts and nuts. 3. Driveshaft universal joint failure: Caused by a broken dust cover or oil leakage that was not repaired in time. Solution: Replace the driveshaft universal joint with a new one. When the car is stationary, the ground clearance at the four corners of the body has a significant impact on the load of the wheels at those positions.
2
2
Share

What is the trunk capacity of the Song Plus DM-i?

The maximum trunk storage space is 574L. Below are the specific details of the BYD Song Plus DM-i: 1. Exterior: The front fascia features a large-sized grille paired with silver chrome trim. As for the side profile, it adopts flowing line designs, giving the overall shape a dynamic and fashionable appearance. 2. Powertrain: The BYD Song Plus DM-i is equipped with a dedicated 1.5L Xiaoyun plug-in hybrid engine, delivering a maximum power of 110 horsepower and a maximum torque of 135 Nm. It comes with blade battery technology, offering pure electric range options of either 51km or 110km.
10
5
Share

Where is the Outlander's Cabin Air Filter Located?

Outlander's cabin air filter is located inside the glove compartment on the passenger side. The functions of the cabin air filter are: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. It separates solid impurities such as dust, pollen, and grinding particles from the air; 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air; 4. It maintains clean air in the passenger compartment, preventing bacterial growth and creating a healthy environment; 5. It effectively separates solid impurities such as dust, core powder, and grinding particles from the air; 6. It effectively blocks pollen, ensuring that drivers and passengers do not suffer allergic reactions that could affect driving safety.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.