What are the reasons for a sudden engine stall while driving the Bestune T77?

1 Answers
RowanLee
07/29/25 9:50pm
Reasons for a sudden engine stall while driving include fuel system failure, electrical circuit failure, ignition component failure, etc. Fuel system failure: Fuel pipe rupture, fuel pump failure, fuel depletion, or fuel inlet blockage can cause the engine to stall. Electrical circuit failure: Short circuits in low-voltage lines leading to power interruption, check for faults in the ignition switch and starter, as well as blown fuses in the fuse box. Ignition component failure: Faults in components such as the ignition coil, ignition module, or spark plugs may cause the engine to start, stall after a while, start again, and then stall once more. Engine belt misalignment or breakage: Belts can age and loosen over time, leading to breakage or misalignment, which can cause the engine to stall. Lack of driving skill: Automatic transmission vehicles generally do not experience stalling, while manual transmission models require proper clutch and throttle coordination. Sometimes, if the car's speed drops and the driver does not downshift, staying in a high gear instead of shifting to a lower gear, the car may stall.
Was this review help?
6
2
Share
More Forum Discussions

What are the weight requirements for deflection testing vehicles?

Deflection value refers to the magnitude of deformation in the roadbed/pavement before and after the application of load, measured in units of 1/100 millimeters. The calculated deflection value represents the weighted average of residual deformation in a specific road section, measured at 20-meter intervals, using vehicles with a specified axle load (typically rear-axle vehicles of 6 or 10 tons) before and after applying load to the roadbed/pavement. Heavier vehicles generally exhibit better high-speed stability. Factors affecting high-speed stability include: 1. Vehicle tires: Tires are the only components in contact with the ground. Generally, wider and flatter tires improve high-speed stability. 2. Vehicle shape: Aerodynamic designs enhance stability at high speeds. 3. Drive configuration: Most vehicles are front-wheel drive, rear-wheel drive, or four-wheel drive, with four-wheel drive offering superior stability compared to two-wheel drive. 4. Suspension system: Vehicles with independent suspension (such as MacPherson or multi-link independent suspension) are generally more stable than those with non-independent suspension systems.
17
2
Share

What is the situation when the mechatronic unit is damaged?

The reason for the damage to the mechatronic unit is that the lubrication level of the transmission oil does not meet the requirements. Below are the relevant details: 1. Specific reasons: The transmission mechatronic unit has high requirements for shifting and maintenance. If the lubrication level of the transmission oil is insufficient, the transmission will not receive adequate lubrication over time, accelerating wear and tear on the transmission, leading to damage to the mechatronic unit and shortening the transmission's service life. The solution is to replace it with high-quality transmission oil. 2. Symptoms of damage: Signs of a damaged mechatronic unit include the gear indicator light on the car dashboard illuminating, car shaking, the transmission being unable to upshift, missing odd or even gears, and in severe cases, the vehicle may not operate normally. Other possible symptoms include fault codes indicating an inability to engage gears, or fault codes related to the clutch unintentionally opening or closing.
7
4
Share

What are the two reference points for exiting a parallel parking space?

Exiting a parallel parking space: Step 1: After hearing the voice prompt, depress the clutch and brake, shift into first gear, turn on the left turn signal, turn the steering wheel fully, and slowly exit the space. When the right front corner of the hood aligns with the roadside line (this is the first reference point), straighten the steering wheel and continue moving forward. The second reference point: Step 2: Continue moving forward. When the left one-third of the hood aligns with the yellow line (this is the second reference point), turn the steering wheel one full turn to the right. Guide the vehicle around the corner of the parking space to exit. When the car body is parallel to the road, straighten the steering wheel to the left and exit the parallel parking test area. Precautions for exiting: During the process of exiting a parallel parking space, pay attention to controlling the clutch. The speed should be slow, but do not stop midway. The timing of turning the steering wheel must be precise; otherwise, missing the right moment can easily lead to crossing the line.
9
5
Share

Will the Car Key Be Damaged If Washed in the Washing Machine?

Whether a car key can still be used after being washed in the washing machine depends on the situation. Generally, it can still function. When a car key is accidentally washed in the washing machine, avoid shaking it vigorously, as this can spread the moisture inside the key and potentially increase the damage. Below are some functions of a car key: 1. Vehicle Locator: The vehicle locator function uses the remote or alarm system. Pressing the button will make the car's horn sound and the hazard lights flash, making it easier to find your car in a crowded parking lot. 2. Window Closure: After exiting the car, holding down the lock button can remotely close all four windows. This is a very convenient and frequently used feature. 3. Trunk Opening: The car remote key has a button to open the trunk. If you're coming out of a supermarket with bags in both hands, you might find it useful to know that holding down the trunk unlock button (or pressing it twice for some cars) will automatically pop open the trunk.
2
1
Share

Is There Any Impact When Parking a Car Under a Tree During Thunderstorms?

No matter how severe the thunder is, even if the car is struck by lightning, it's fine. The metal shell of the car disperses the current due to its shape, so even if struck, the contents and people inside remain safe. However, during thunderstorms, never park your car under large trees, next to isolated buildings, or beside large billboards to avoid lightning strikes and prevent your beloved car from being damaged by falling objects. Relevant information about automotive radar is as follows: 1. Introduction: Automotive radar, as the name suggests, is radar used for cars or other ground motor vehicles. Therefore, it includes various radars based on different technologies (such as laser, ultrasound, microwave) with different functions. 2. Collision Avoidance Radar: This type of radar can measure hazardous obstacles on the road ahead that may cause collisions based on the vehicle's current direction and speed, making it suitable for situations with low atmospheric visibility and less-than-ideal judgment (such as short distances between vehicles or high speeds).
10
4
Share

What does wheel J mean?

Tire J value actually refers to the width of the wheel rim. Wheel rims with different J values need to be matched with tires of corresponding widths. Below is an introduction to the relevant information about tire J values: 1. Wheel hub width: Wheel hubs are marked with specifications like 7J or 8J. Here, the numbers represent the width of the wheel hub, while J indicates the shape and height of the wheel hub flange. Many car modification enthusiasts opt for wider rims paired with wider tires, as broader tires can enhance a vehicle's grip, thereby improving handling performance. 2. Industry notation: In the wheel hub industry, specifications are typically written as 16X6.5J. The number 16 denotes the wheel diameter in inches (indicating a 16-inch wheel). The number 6.5 represents the cross-sectional width of the wheel hub in inches. The 'X' in the middle does not signify length × width as commonly perceived, but rather indicates that the wheel hub style is a one-piece deep well design, primarily used for passenger vehicles. In contrast, large trucks and specialized wheeled machinery often employ semi-deep well designs.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.