What are the reasons for a motorcycle not stalling when parked?

1 Answers
CamilaLynn
07/30/25 3:28am
The main reason for a motorcycle not stalling when parked is due to the influence of adverse weather conditions. Reasons influenced by adverse weather conditions: Engine dampness, wet circuits, blocked air filters, and oxygen-deficient mixture ratios can cause this situation. The idle speed and mixture ratio may temporarily become severely imbalanced or abnormal. If you must continue riding the motorcycle under these conditions, you can first gently dry the damp parts. Ordinary motorcycles are quite sensitive to weather influences, so it's best not to hastily make adjustments or repairs out of urgency. Solutions for a motorcycle not stalling when parked: Check if the crankshaft oil seal is damaged. You can remove the external parts of the crankshaft oil seal and inspect the seal. If the oil seal is damaged, it should be replaced with a new one.
Was this review help?
12
5
Share
More Forum Discussions

What is the minimum ground clearance of the new Mondeo?

Mondeo 2013 models all have a minimum ground clearance of 124mm. Ground clearance of other vehicles: Generally, the ground clearance of sedans is between 120-200mm, while SUVs have a ground clearance of 210-370mm, and buses have a ground clearance of 220-370mm. Introduction to minimum ground clearance: Minimum ground clearance refers to the distance between the lowest point of the car (excluding wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and stumps without collision. Minimum ground clearance refers to the distance between the lowest point of the car (excluding wheels) and the road surface when the car is fully loaded. It indicates the car's ability to overcome obstacles (such as stones, etc.). The smaller the ground clearance, the worse the ability to overcome obstacles.
13
2
Share

Is it illegal to modify car seats?

Modifying car seats is illegal and considered an unauthorized modification. Below is more information about car modifications: 1. Legal modifications: You can modify the body color (including interior), engine, fuel type, and frame number. However, changes to the body, frame, or engine can only be made if they are damaged beyond repair or have quality issues. When applying for modification, proof from a repair shop and documentation of the source of the replacement engine, body, or frame must be provided. 2. Illegal modifications: Unauthorized vehicle modifications refer to alterations to the vehicle's appearance, power system, transmission system, or braking system that exceed the original design load capacity and functions permitted by national laws and manufacturer agreements, including the replacement of key components. There are certain restrictions on car modifications, and random modifications may fail the annual inspection. Therefore, any car modifications must comply with relevant regulations.
17
3
Share

How to Replace the Rear Light Cover of Volkswagen Lavida?

Steps to replace the rear light cover of Volkswagen Lavida: 1. Open the trunk lid and remove the inner lining of the taillight, pry open the clips with a screwdriver; 2. Remove and store the three nuts fixed on it one by one; 3. Unplug the rear taillight wires by hand; 4. Hold both sides of the rear taillight, pull and shake it to separate the taillight from the car body. The dimensions of the Volkswagen Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.5L all-aluminum naturally aspirated engine, featuring a brake assist system, electronic power steering system, hill start assist system, and multifunctional rearview mirror.
8
3
Share

What Causes the Grinding Noise When Shifting Gears in a Corolla?

Corolla shifting grinding noise reasons are detailed as follows: Lack of lubrication in bearing parts: It could be due to insufficient lubrication in parts like the water pump bearing or generator bearing. When the car is cold, the clearance between components is smaller, and these rotating parts may slip under high pressure, resulting in abnormal noises. Pulley slipping: Another possible cause is the slipping of the belt and pulley, which can also lead to abnormal noises. Precautions for Corolla gear shifting noise: Regardless of the type of "abnormal noise," it is essential to identify the issue promptly and seek repairs without delay. Based on the inspection results, promptly address, repair, or secure any faulty components or issues caused by improper installation, reverse installation, or lack of tightening by personnel. Eliminate potential safety hazards.
4
3
Share

Why can't my phone connect to Audi CarPlay?

CarPlay connection issues may arise due to the following reasons: Data cable plug issues: If CarPlay fails to connect, first check if the phone's data cable is damaged or broken. Foreign objects on the phone's data cable plug or USB plug, or surface oxidation, can also prevent CarPlay from connecting. External USB port issues: Inspect the external USB port on the car's head unit to ensure the contact metal plates maintain good connection with the USB. If damaged, CarPlay will not connect. Loose car USB port: Prolonged use of the car head unit's USB port can cause loosening and oxidation over time, leading to poor internal plug contact. In such cases, repeatedly unplugging and replugging the cable may help. If the issue persists, replacing the USB port may be necessary.
16
1
Share

What gear should be used when going uphill in an underground garage?

When going up a steep slope in an underground parking garage, use second gear. The gear used for a manual transmission car when going uphill is related to both the vehicle speed and the slope gradient. For steeper slopes, a lower gear such as 2nd or 3rd should be selected (depending on the current speed). High-displacement vehicles can also use third gear with increased throttle to climb, while small-displacement vehicles should use second gear to ensure sufficient traction. Below are the gear usage recommendations for different slope gradients: 1. For high-displacement vehicles and gentle slopes, drivers can use 2nd or 3rd gear for climbing. 2. For low-displacement vehicles and gentle slopes, second gear should suffice, and third gear may not be necessary for some slopes—lower gears are adequate. 3. For very steep slopes, regardless of the vehicle's displacement, it is recommended to use first gear for climbing, as first gear provides the maximum torque. If a slope cannot be climbed in first gear, other gears will not help either.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.