What are the reasons for a motorcycle having electricity and fuel but failing to start?

Will the car engine get water in on rainy days?

Here is a detailed introduction about whether the engine will get water in on rainy days: When the vehicle is in a static state: If the vehicle is parked and submerged in water without starting the engine, as long as the water level does not reach the intake port of the engine's air intake system, the engine will not be damaged. When the vehicle is driving through flooded areas: If the water level exceeds half of the tire height, there is a possibility of water entering the engine. This is because when water enters the engine intake port either statically or dynamically, it will flow into the cylinders through the intake port, forming a mixture of air and water. While air can be compressed, water cannot. When the crankshaft pushes the connecting rod to compress towards the piston, the water cannot be compressed, causing the connecting rod to bend under the force of the water. If the engine stalls at this point and attempts are made to restart the car, the immense counterforce can cause the bent connecting rod to rub against the cylinder block. Once the top of the engine cylinder block bends, there is a risk of it breaking.

13

4

Share

Where is the anti-theft screw for Mercedes S400?

Mercedes S400 does not have anti-theft screws. Principle of tire anti-theft screws: The anti-theft principle of tire anti-theft screws is to process the outer diameter of the screw into an irregular shape, so that only the special removal tool that comes with the wheel can be used to remove the wheel. This prevents thieves from using ordinary removal tools. Using just one anti-theft screw per wheel can achieve the anti-theft effect, fully ensuring the safety of the car tire. Each wheel lock has 4-12 lock types, and the lock types are constantly being updated, effectively preventing tire theft. The method to remove tire anti-theft screws is: Open the trunk and clear out the items inside; then you will see a handle, lift the handle of the mat upwards; you will see a large round plastic screw on the tire, turn it counterclockwise, then take out the cover; the anti-theft screw can then be removed.

17

3

Share

What is the fuel consumption of the Geely Emgrand automatic transmission?

Geely Emgrand average fuel consumption is 7.81 liters per 100 kilometers. Reasons for high car fuel consumption: Insufficient running-in period. For newly purchased vehicles, since the engine components have not been fully run-in, the gaps between parts are relatively small, resulting in higher engine operating resistance. It's advisable to patiently complete the running-in period and then observe if there are changes in fuel consumption. Clogged fuel lines due to excessive carbon buildup can lead to increased fuel consumption. Causes of excessive engine carbon deposits include overfilling with oil or using inappropriate oil products. Improper driving habits such as aggressive acceleration and frequent braking will increase fuel consumption. Statistics show that underinflated tires affect fuel consumption - when tire pressure is too low, the increased contact area with the road surface creates greater rolling resistance, naturally leading to higher fuel consumption. About calculating average car fuel consumption: First method: directly check the data calculated by the vehicle's onboard computer, which will be displayed on the instrument panel. Second method: manual calculation using the formula: car fuel consumption = fuel consumed/distance traveled, with units in L/100km.

20

3

Share

What are the body dimensions of the Jaguar F-TYPE?

The length, width, and height of the Jaguar F-TYPE are 4470mm/1923mm/1308mm, which are official data. The length of the Jaguar F-TYPE refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Jaguar F-TYPE has a maximum power of 221kw and a maximum torque of 400 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1500 to 4500 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic manual transmission. There are relevant national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

14

0

Share

What Causes the Engine Malfunction Indicator to Flash?

The engine malfunction light may illuminate due to the following 7 main reasons: Sensor failure: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors, when damaged, poorly connected, or signaling interrupted, prevent the vehicle's ECU from accurately obtaining engine data, triggering the malfunction light. Fuel quality issues: Failure to use the fuel and engine oil as recommended by the manufacturer may cause engine wear, leading to the malfunction light activation. Poor fuel mixture combustion: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Issues like spark plug failure, ignition coil failure, fuel pump failure, or clogged fuel lines can all cause poor fuel mixture combustion. Turbocharging problems: The intake boost piping or turbocharger can also trigger the engine malfunction light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system is compromised, it may lead to engine pipe blockages, and in severe cases, the malfunction light will illuminate. A dirty or uncleaned air filter can cause intake issues. Exhaust problems: Exhaust system failures can also activate the engine malfunction light. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing failures, with the catalytic converter being the most frequent. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily lead to catalytic converter problems. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and the engine ECU, the anti-theft system can prevent the engine from operating normally, accompanied by the malfunction light activation. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally, looking for signs like shaking or black smoke. If such symptoms are present, avoid restarting the engine. Especially, do not restart if the light is red. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without depressing the clutch. The vehicle will initiate a self-check upon powering up. Observe if the malfunction light turns off after 5-10 seconds. If the light remains on, visit a service station as soon as possible. Technicians can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.

18

2

Share

How to Use the Mercedes-Benz Headlight Cleaning Function?

The usage of the Mercedes-Benz headlight cleaning function is to press the windshield cleaning button five times consecutively while the headlights are on. The Mercedes-Benz lineup includes models such as the Mercedes-Benz E-Class, S-Class, GLC, A-Class, GLS, and Maybach S-Class. Taking the 2021 Mercedes-Benz GLC as an example, it features a 5-door, 5-seat SUV crossover body structure. Its dimensions are: length 4729mm, width 1890mm, height 1602mm, wheelbase 2873mm, fuel tank capacity 66L, luggage capacity 580L, and curb weight 1840kg.

2

1

Share

What are the reasons for a motorcycle having electricity and fuel but failing to start?

Will the car engine get water in on rainy days?

Where is the anti-theft screw for Mercedes S400?

What is the fuel consumption of the Geely Emgrand automatic transmission?

What are the body dimensions of the Jaguar F-TYPE?

What Causes the Engine Malfunction Indicator to Flash?

How to Use the Mercedes-Benz Headlight Cleaning Function?

What are the maintenance items for small cars?

Is the fuel filter of Haima S5 externally mounted or internally mounted?

How to Use BMW Headlight Automatic Cleaning?

Where is the fuel tank switch located in the Passat?