What are the reasons for a diesel engine failing to restart after stalling?

2 Answers
Shawn
09/08/25 3:09am
Diesel engine failing to restart after stalling is mainly due to the engine temperature being too low. As long as the engine is kept warm and the biting cold wind is prevented from directly blowing into the engine compartment, the issue of failing to start can be avoided. Choosing the right parking location: When parking in winter, pay attention to the direction of the front of the car. It is best to park the front of the car facing a building to use the building as a windbreak, preventing the engine from being too cold due to the cold wind. When parking at night, you can face the front of the car towards the direction of the morning sun, allowing the first rays of sunlight in the morning to shine on the front of the car, helping the engine to warm up. This makes starting the car much easier. Engine stalling when shifting gears: This may be due to the idle speed being too low at the time, or the idle speed cut-off valve not being tightened, or it could be due to the gear being too high causing the engine to stall. Another possibility is that the oil-gas separator is severely clogged.
Was this review help?
10
1
Share
MacCatherine
09/19/25 8:45am
I've been driving diesel vehicles for over a decade and often encounter this issue. The engine fails to start after shutting down, most commonly due to fuel system malfunctions. Diesel engines require high-pressure fuel for ignition, so the fuel pump might be damaged or the fuel filter clogged. In older vehicles that have been driven for a long time, filters accumulate a lot of dirt, which can cause the engine to seize upon restarting after shutdown. Insufficient fuel can also be a culprit, as fuel gauges sometimes inaccurately display levels, and refueling often resolves the issue. Additionally, a weak starter battery can prevent the engine from starting, especially in winter or when the battery is aging, so regular battery maintenance is essential. Problems with fuel injectors or intake sensors can also arise, as dust buildup may cause blockages. Last time my car had the same issue, it turned out the air filter was dirty, and cleaning it solved the problem. I recommend regular maintenance, such as replacing fuel filters and checking battery lifespan, to avoid breakdowns on the road.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What car is the Mustang snake logo?

Wild horse snake logo is Ford Mustang GT500, which is a medium-sized sports car, commonly known as Shelby Cobra. Taking the 2013 Ford Mustang GT500 as an example, it belongs to the sports car category, with body dimensions of: length 4780mm, width 1877mm, height 1400mm, wheelbase of 2720mm, and a fuel tank capacity of 55L. The 2013 Ford Mustang GT500 features a front suspension of MacPherson independent suspension with a stabilizer bar, and a rear suspension of solid axle non-independent suspension. It is equipped with a 5.8L supercharged engine, delivering a maximum horsepower of 671PS, maximum power of 494kW, maximum torque of 855Nm, paired with a 6-speed manual transmission.
15
1
Share

What are the consequences of not scrapping a motorcycle that has reached its end-of-life period?

Motorcycles that have reached their end-of-life period but have not been scrapped will face the following consequences: 1. If the motorcycle owner fails to legally complete the deregistration process, the vehicle management department will not process any new vehicle registration or transfer procedures for them; 2. The vehicle management department will also revoke the registration certificate, license plate, and driving license for those who fail to obtain the inspection qualification mark within the specified period; 3. For those who fail to complete the deregistration procedures within the deadline, a mandatory deregistration notice will be issued. A motorcycle is a flexible and fast means of transportation, powered by a gasoline engine and steered by handlebars to control the front wheel. It can be a two-wheeler or three-wheeler, known for its light weight, agility, and speed, widely used for patrol, passenger and cargo transportation, and as sports equipment.
15
1
Share

What is the capacity of car windshield washer fluid?

Car windshield washer fluid capacity is approximately 1.5 liters. Windshield washer fluids are categorized into summer-use 0°C fluid and winter-use -20°C or -35°C fluid. The functions of windshield washer fluid are: 1. Maintaining clear visibility through the windshield while driving; 2. Extending the lifespan of both the windshield and wiper blades; 3. Preventing window icing in winter; 4. Eliminating static electricity on windows. The method for adding windshield washer fluid is: 1. Activate the wiper switch, causing the fluid to spray from nozzles below the windshield; 2. Continue until nozzles stop spraying, then open the washer fluid reservoir cap to add fluid; 3. Reactivate the wiper switch to clear remaining fluid; 4. When no more fluid sprays out, refill the reservoir and securely close the cap.
18
5
Share

What Causes the Noise When Braking in Reverse?

Reasons for noise when braking in reverse: When braking in reverse, which is opposite to the vehicle's forward direction, there is a certain amount of clearance between the brake pads and the rear end of the bracket. Therefore, during braking, the brake pads impact the rear surface of the bracket, resulting in abnormal noise. The working principle of braking mainly relies on friction. By utilizing the friction between the brake pads and the brake discs, as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy through friction, bringing the car to a stop. To mitigate the noise when braking in reverse, a thin layer of lubricating grease can be applied to the parts where the brake pads connect with the brake caliper bracket. This can help improve the phenomenon to some extent.
5
0
Share

Why does the engine light sometimes turn on and sometimes off?

The engine warning light sometimes turning on and sometimes off indicates there is an issue with the engine. The intermittent nature of the light suggests the problem is not yet severe. When the issue does not affect normal driving, the engine warning light will turn off, but it will illuminate when a fault is detected. Common causes include: 1. Excessive carbon buildup in the throttle body or engine internals. 2. A faulty oxygen sensor leading to an imbalance in the air-fuel mixture. This often occurs with prolonged low-speed city driving. 3. Fuel injector leakage causing continued fuel supply after throttle release, resulting in an overly rich mixture at low speeds and unstable idle. In severe cases, this may cause the engine to stall. 4. Use of substandard gasoline with excessive metal content, poisoning the oxygen sensor. The solution is to switch to a different gas station.
15
0
Share

Is it better to use the internal or external circulation when turning on the car's air conditioning?

It is better to use the external circulation when turning on the car's air conditioning. Setting the air conditioning to internal circulation mode will cause the temperature inside the car to rise quickly. After the car becomes warm, switch to external circulation to help with air circulation inside the vehicle. The functions of car air conditioning are: 1. Achieving a cooling effect through the continuous phase change cycle of the refrigerant; 2. Removing dust, odors, smoke, and toxic gases from the air inside the car, making the air fresher and increasing the relative humidity inside the vehicle. Methods for using and maintaining car air conditioning include: 1. Do not set the temperature too low; 2. Control the direction of the air vents; 3. Avoid prolonged use; 4. Occasionally turn on high fan speed; 5. Turn off the air conditioning when driving at low speeds.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.