What are the reasons for a car suddenly stalling while driving?

1 Answers
ZoeyMarie
07/25/25 4:35pm
There are several reasons why a car may suddenly stall while driving: 1. Electrical circuit failure: Stalling due to low-voltage power interruption during driving, mainly check the ignition and starter switches as well as the fuse box. 2. Stalling caused by a short circuit in the low-voltage line. 3. Component failure: Usually, issues with the ignition coil, capacitor, or electronic ignition module. 4. Fuel system failure: Damage to the fuel pump, fuel pipe rupture, clogged carburetor fuel inlet, or an empty fuel tank can all cause sudden stalling. 5. Ignition system problems or issues with the engine overheating anti-explosion system. 6. Driver's lack of proficiency leading to stalling, especially improper coordination between the throttle and clutch in manual transmission cars.
Was this review help?
20
5
Share
More Forum Discussions

What does Xiaopeng NGP mean?

Xiaopeng NGP, which stands for "Navigation Guided Pilot", is an assisted driving function achieved by the Xiaopeng XPILOT 3.0 system in combination with navigation routes. Here is more related information: 1. After being activated, the NGP function can not only realize the original ACC adaptive cruise, LCC lane centering assistance, ALC automatic lane changing assistance and other functions, but also has the functions of automatically selecting the optimal lane, automatically overtaking slow vehicles, automatically adjusting speed limits, automatically entering and exiting ramps to switch highways, avoiding traffic cones and faulty vehicles, and reminding of overtaking at night. 2. Compared with the assisted driving systems that people commonly know, NGP has more "autonomous capabilities" and is closer to autonomous driving.
19
1
Share

What are the differences between the domestic Mazda CX-7 and the imported CX-7?

The differences between the domestic Mazda CX-7 and the imported CX-7 are: besides the lower price threshold, the domestic version also adds a 2.3T turbocharged direct injection engine. The Mazda CX-7 is a Crossover-SUV model under the Mazda brand. Relevant information about the Mazda CX-7 is as follows: 1. The windshield of the Mazda CX-7 has a tilt angle of 66 degrees, which is more expansive and dynamic compared to other SUV models and sports cars. 2. In terms of interior, the central control panel features a unique double-layer structure formed by the 'top cover' of the instrument hood and the 'top cover' extending above the entire control panel.
2
4
Share

Does the dash cam consume power when it is always on?

The dash cam consumes power when it is always on. When the vehicle is parked, the dash cam remains in a dormant state. It only powers on for 5 to 10 seconds when the vehicle body vibrates, then returns to the dormant state, consuming very little power. The functions of a dash cam are: 1. Record video images and audio of the entire driving process; 2. Serve as a parking monitor; 3. Provide footage to assist in handling accidents. The usage method of a dash cam is: 1. Insert the memory card and press the power button to turn it on; 2. Press the mode button to select among video recording, photo taking, and preview modes; 3. Selecting the video recording mode will automatically start recording.
11
3
Share

How to Adjust the Audio System in the Excelle?

To adjust the audio system in the Excelle, press the SET button to enter the sound effect settings. The Excelle offers the following sound effect adjustment options: 1. BAS (Bass control, -7~+7). 2. TRE (Treble control, -7~+7). 3. FAD (Front/Rear balance control, F7~R7). 4. BAL (Left/Right balance control, L7~R7). For higher-end Excelle models, the sound effect settings include: 1. In the infotainment system's settings menu, users can customize sound effects by adjusting "Bass," "Midrange," "Treble," "Left/Right," and "Front/Rear." 2. An automatic sound adjustment feature is available, which enhances low frequencies when the volume is reduced to make the sound fuller. Tap the screen button to turn this feature on or off.
16
2
Share

What are the functions of a dash cam?

The functions of a dash cam include: 1. Preventing fraudulent claims; 2. Providing evidence in case of traffic accidents; 3. Recording driving experiences; 4. Navigation. Steps to playback dash cam footage: 1. First, remove the TF memory card; 2. Insert the TF memory card into a card reader and connect it to the computer via the USB slot; 3. Read the video files from the removable disk; 4. Select the desired file to playback. Steps to set the recording time on a dash cam: 1. Press the M button on the dash cam; 2. Navigate to the time settings in the general settings menu and adjust accordingly.
13
1
Share

What is the method for dismantling the dashboard of a Haval H6?

Haval H6 dashboard dismantling method is: 1. Remove the screws connected to the dashboard; 2. Insert a screwdriver into the area where the dashboard meets the instrument panel above, there is a clip on each side inside, pry them out. Taking the 2021 Haval H6 as an example, it is a compact SUV with body dimensions: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The 2021 Haval H6 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 211PS, maximum torque of 325Nm, maximum power of 155kW, and is paired with a 7-speed dual-clutch transmission.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.