What are the reasons for a car's air conditioning not cooling?

2 Answers
StOwen
07/28/25 9:44pm
The reasons for a car's air conditioning not cooling are: 1. Lack of refrigerant: Car air conditioning systems generally require refrigerant replenishment every 2 to 3 years, with most losses occurring due to leaks. If the air conditioning stops cooling after refrigerant refill and then fails again after some time, the system should be checked for damage; 2. Dirty condenser: When the condenser is blocked by debris, it can cause engine overheating or air conditioning failure; 3. Damaged throttle valve or expansion valve: Malfunctions in these components will directly result in air conditioning failure; 4. Worn or loose belt; 5. Damaged air conditioning flap.
Was this review help?
1
0
Share
DiAlana
08/12/25 2:20am
My car's AC doesn't cool well in summer, which is really annoying. The most common reasons are insufficient refrigerant or leaks, possibly due to aging pipes or loose connections. A broken compressor could also be the culprit - that's the heart of the AC system, and once it fails, cooling stops. I usually check the fuse box myself; if a fuse is blown, the AC won't turn on, and replacing it might solve the problem. Additionally, a severely clogged cabin air filter can obstruct airflow - cleaning or replacing it can help. Another issue could be the condenser fan malfunctioning; if the fan doesn't spin, heat can't dissipate properly, leading to poor cooling. I must remind everyone not to overlook these small issues, especially during hot weather when driving safety comes first. Regular professional maintenance of the AC system is recommended to avoid uncomfortable breakdowns. In short, checking these points can save a lot of trouble.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What are the steps for bumper removal and installation?

Here is the method for removing the bumper: 1. Park the vehicle on a lift, take safety measures, and raise the vehicle to an appropriate height. 2. Remove the bolts on the left and right sides of the rear bumper. 3. Pull the rear bumper out parallel from the guide channel, completing the bumper removal. Here is some related information: 1. Traditional bumpers: The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. Twenty years ago, front and rear bumpers of cars were primarily made of metal materials, using steel plates over 3mm thick pressed into U-shaped channels, with chrome-plated surfaces, riveted or welded to the frame longitudinal beams, leaving a significant gap from the body, appearing as an additional component. 2. Modern bumpers: With the development of the automotive industry, car bumpers, as an important safety device, have also evolved. Today's front and rear bumpers not only maintain their original protective functions but also strive for harmony and unity with the vehicle's styling and pursue lightweight design.
9
1
Share

What are the three modes of KTM390?

The three modes of KTM390 are Street, Rain, and OffRoad. The KTM390 is equipped with a new 373.5cc liquid-cooled, four-stroke, single-cylinder engine, delivering a maximum horsepower of 42PS at 9500rpm and a maximum torque of 35Nm at 7250rpm. The new model features BREMBO's BYBRE brake calipers, paired with 300mm front and 230mm rear discs, providing ample braking performance. It also comes with Bosch ABS anti-lock braking system. The updates to the clutch on the KTM390 further enhance its market competitiveness, showcasing its direct competition with the Yamaha R3. Introduction: KTM is an Austrian motorcycle manufacturer founded in 1934, known for its outstanding performance in off-road motorcycles and has won numerous awards in off-road competitions. Brand: KTM, an Austrian motorcycle manufacturer, is a world-renowned developer of off-road vehicles. Honor: In March 2020, KTM ranked 85th in the 'Top 100 Most Valuable Automotive Brands 2020' (Automobiles1002020) list released by Brand Finance.
8
5
Share

How to Classify Sedan Levels?

Sedan levels are classified based on wheelbase and engine displacement. Here is a detailed introduction to sedan levels: 1. A-segment cars: Also known as compact cars, smaller cars are referred to as subcompact cars, or A0-segment cars, such as the Vios, Fit, and Polo. Some compact cars now feature extended wheelbases, such as the Lavida, Lamando, and Corolla, with wheelbases around 2.4 to 2.6 meters and displacements mostly between 1.0 and 1.5 liters. 2. B-segment cars: Known as midsize cars, models like the Magotan, Passat, Camry, Accord, BMW 3 Series, and Audi A4 have wheelbases around 2.7 to 2.9 meters and displacements between 1.4 and 2.5 liters. 3. C-segment cars: Referred to as executive cars, with wheelbases around 3 meters and displacements between 2.0 and 3.0 liters. Common C-segment cars include the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class. 4. D-segment cars: Known as full-size luxury cars, with wheelbases ranging from 3.1 to 3.6 meters and displacements from 2.0 to 6.6 liters. Representative models include the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Lexus LS, Bentley, and Rolls-Royce.
14
4
Share

How to Identify Whether Motor Oil is Semi-Synthetic or Fully Synthetic?

There are two methods to determine whether motor oil is semi-synthetic or fully synthetic: 1. Packaging: Check the outer packaging of the oil, which usually indicates the type of oil. 2. Oil color: The color of the oil can also be used to distinguish between types. Mineral oil tends to have a darker color, while synthetic oil is lighter, appearing as a transparent light yellow. If labeled 'Full-Synthetic,' it is fully synthetic oil. The differences between semi-synthetic and fully synthetic oils are as follows: 1. Semi-synthetic oil is based on mineral oil refined through hydrogenation. Synthetic motor oil is derived from ethylene and propylene dispersed from natural gas or crude oil, undergoing polymerization, catalysis, and other complex chemical reactions to produce high-molecular lubricants. 2. Fully synthetic oil has a broader temperature range and longer service life. 3. For the same oil film requirements, synthetic oil has lower viscosity, while semi-synthetic oil has higher viscosity compared to synthetic oil. 4. Semi-synthetic oil is mainly used for economical vehicles, whereas fully synthetic oil is primarily used for luxury vehicles. 5. The amount of additives differs, with fully synthetic oil containing more and semi-synthetic oil containing fewer additives. 6. Fully synthetic oil has better anti-aging stability. 7. Fully synthetic oil provides better engine protection. 8. The price of fully synthetic oil is higher than that of semi-synthetic oil.
3
4
Share

What is the reason for the continuous flashing of the keybatt indicator light?

The reason why the keybatt keeps flashing is that the battery in the key is low on power and should be replaced. 'Key' translates to 'key', and 'batt' translates to 'battery'. The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. Indicator and warning lights: Timing belt indicator: Some imported cars that use timing belt drives and overhead camshafts generally have a limited service life for the engine timing belt (approximately 100,000 km), after which it must be replaced. To ensure timely replacement by maintenance personnel, a timing belt service life indicator 'T.BELT' is installed on the dashboard. Exhaust temperature warning light: Modern cars are equipped with a three-way catalytic converter on the exhaust pipe, which increases the exhaust temperature. However, excessively high exhaust temperatures can easily damage the three-way catalytic converter. Therefore, such vehicles are equipped with an exhaust temperature warning device. When the exhaust temperature warning light comes on, the driver should immediately reduce speed or stop the vehicle. Once the exhaust temperature drops, the warning light will automatically turn off (however, a fuse-type exhaust temperature warning light will remain on if not adjusted or repaired). If the exhaust temperature warning light does not turn off, the cause should be identified and the fault resolved before continuing to drive.
20
2
Share

What Causes the Engine Warning Light to Illuminate in a Volvo S60?

There are primarily 7 reasons why the engine warning light illuminates in a Volvo S60: Sensor Malfunction: The sensors referred to here include coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or Oil Quality Issues: Failure to use the fuel and oil as specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor Combustion of Air-Fuel Mixture: Poor combustion can result in engine carbon buildup or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all lead to poor combustion. Turbocharger Problems: The intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Issues: Problems with the vehicle's intake system can lead to clogged engine piping, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake problems. Exhaust Issues: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead- or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-Theft System Malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and the engine ECU, the anti-theft system can prevent the engine from operating normally, while also illuminating the engine warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally, looking for symptoms like shaking or black smoke. If present, avoid restarting the engine. Note: Never restart the engine if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without depressing the clutch. The vehicle will perform a self-check upon powering up. After 5-10 seconds, observe if the warning light turns off. If the warning light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.