What are the reasons for a car's air conditioner not cooling and blowing hot air?

1 Answers
VanGarrett
07/29/25 11:14pm
There are several reasons why a car's air conditioner may not cool and instead blow hot air: 1. Lack of refrigerant. Even if the air conditioning system is tightly sealed, refrigerant can still escape, especially if there are minor leaks in the air conditioning lines or condenser. Most refrigerant loss is due to leakage. 2. Damaged air conditioning flap. Damage to the air conditioning flap motor is relatively rare. 3. Dirty condenser. The main purpose of cleaning the radiator and condenser is to dissipate heat. If springtime poplar and willow catkins accumulate on the condenser, it can lead to issues such as excessive engine temperature or poor air conditioning performance. 4. Damaged air conditioning compressor, throttle valve, or expansion valve. The likelihood of the air conditioning compressor being damaged is low, so it's not a major concern. However, faults in the expansion valve or throttle valve can directly cause poor air conditioning performance. These issues are complex to diagnose and require professional repair shops. 5. Worn or loose belt. While checking all air conditioning components, the belt is often overlooked. Typically, during maintenance, a 4S shop will remind you to replace the belt. If not replaced, slipping may occur during use, leading to belt breakage, unusual noises, loss of power assistance, or poor air conditioning performance. 6. Moisture in the lines. The car's air conditioning refrigeration system includes a dryer tank designed to absorb moisture from the refrigerant and prevent excessive moisture from reducing cooling efficiency.
Was this review help?
14
5
Share
More Forum Discussions

What does PT vehicle mean?

PT vehicle is the abbreviation of Prototype-vehicle, which in the automotive industry refers to the first batch of test vehicles produced from drawings to actual production. In addition, there are ET vehicles, FT vehicles, and mule vehicles, all of which belong to the conceptual design stage of automotive development. The following are specific introductions: ET vehicle: Used for durability test verification and evaluation, as well as calibration and regulatory certification. FT vehicle: Used for various functional verifications and body-related experiments at the end of the design phase. Mule vehicle: Used for powertrain matching during the conceptual design period. There are five stages in automotive project development: All-new development: All-new platform development: The company's blank platform, including the development of a new platform for the complete vehicle body assembly and chassis assembly, including forward and reverse development forms. Model replacement development: The development of replacement products for existing platforms, including comprehensive technical upgrade projects for body, chassis, functions, and performance, as well as resource-integrated development projects. Development of a new body platform based on three types of chassis platforms that remain largely unchanged. Special vehicle series and advanced technology demonstration vehicle development. Core component development: Upgrade and replacement development of three types of chassis based on a largely unchanged body. Product structure and performance upgrades for powertrains, major adjustments, power and torque increases of more than 9%, and regulatory upgrade projects (II→III→IV→V). Development projects for body widening/lengthening/heightening modifications and body floor redesigns. Important component development: Body part development: Annual model improvements for the front wall alone, roof modifications, or annual interior part replacements, rear wall replacements. Left/right-hand drive conversion development. Frame optimization development. Suspension system replacement development. Important component development: Projects with changes in chassis axle load ≥5%.
15
0
Share

Are Trucks Restricted on Highways During National Day?

During the National Day holiday, trucks are subject to traffic restrictions on highways. The specific regulations are as follows: 1. The restricted sections are from Zhonghe Interchange on the Jingzang Expressway to Shibali Pu Interchange on the Qinglan Expressway; 2. The restricted times are from 8:00 to 14:00 on October 1 and from 15:00 to 22:00 on October 8; 3. The restricted vehicles are freight vehicles with three or more axles. Simultaneously, non-stop weigh-in-motion detection will be implemented at the entrance of closed expressway toll stations: 1. The total mass of two-axle trucks must not exceed 18 tons; 2. The total mass of three-axle trucks must not exceed 25 tons; 3. The total mass of three-axle articulated vehicles must not exceed 27 tons; 4. The total mass of four-axle trucks must not exceed 31 tons; 5. The total mass of five-axle articulated vehicles must not exceed 43 tons.
18
5
Share

How to Check the Guangzhou License Plate Lottery Results?

To check the Guangzhou license plate lottery results, follow these steps: 1. Log in to the Guangzhou Small and Medium Passenger Vehicle Quota Control Management Information System and click on the query option; 2. On the query page, enter your phone number, password, and verification code, then click login; 3. Scroll down and click on the winning code query under the results announcement section. According to the basic rules, bidding takes place on the 25th of each month, and the lottery is conducted on the 26th. If the 26th falls on a weekend, it will be postponed to the following Monday, which sometimes results in the license plate lottery and bidding occurring on the same day, such as the 27th. The lottery results can be checked starting from 12:00 PM on the lottery day by calling hotlines such as 96900, 114, 116114, 11185, or 12580.
5
0
Share

What are the traffic restrictions in Tianjin?

Tianjin's traffic restriction rules are as follows: Monday restricts license plates ending with 4 and 9, Tuesday restricts 5 and 0, Wednesday restricts 1 and 6, Thursday restricts 2 and 7, Friday restricts 3 and 8. There are no restrictions on weekends and public holidays. Vehicles with license plates ending with English letters are managed as number 0. Exempted vehicles include: 1. Four types of special vehicles: police cars, fire trucks, ambulances, and engineering rescue vehicles; 2. Large and medium-sized buses, taxis, and postal service vehicles; 3. Vehicles of foreign embassies, consulates, and international organizations in China; 4. Sanitation, landscaping, and road maintenance vehicles; 5. Funeral vehicles from funeral parlors; 6. New energy vehicles with locally issued license plates.
14
5
Share

How are non-local vehicles restricted in Beijing?

Non-local vehicle restrictions in Beijing: 1. Vehicles entering roads within the Sixth Ring Road need to obtain a Beijing entry permit; 2. From 6:00 to 24:00 daily, trucks and special operation vehicles are prohibited from entering roads within the Sixth Ring Road; 3. On workdays from 7:00 to 9:00 and 17:00 to 20:00, passenger vehicles are prohibited from entering roads within the Fifth Ring Road. For passenger vehicles with non-local license plates driving north-south or south-north across Chang'an Avenue and its extensions, this does not violate the restrictions, but left or right turns onto Chang'an Avenue are not allowed during restricted hours. The restrictions for non-local passenger vehicles only apply to the main road of the Second Ring Road, while the auxiliary roads of the Second Ring Road and the sections under its overpasses are not subject to these restrictions.
12
2
Share

Will a Remote Exhaust Valve Damage the Car?

Remote exhaust valves will not damage the car. Installing a remote valve does not harm the exhaust system. However, when making modifications, avoid drilling holes in front of the oxygen sensor; instead, do it behind the sensor to prevent changes in engine data. The automotive exhaust system is designed to collect and discharge waste gases, typically consisting of the exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, muffler, and tailpipe. The exhaust manifold is the first component encountered during the exhaust process, preventing interference between cylinders and ensuring gases are expelled as completely as possible. The mid-section of the exhaust pipe simply directs gases from the manifold to the tailpipe.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.