What are the reasons for a car pulling to the left or right?

2 Answers
SanBrantley
07/28/25 11:37pm
Car pulling to the left or right reasons are: 1. Unequal tire pressure: Mainly caused by inconsistent tire pressure in the drive wheels. If the left and right tire pressures are unequal, it will result in different degrees of wear between the drive wheels and the ground, and different friction levels will directly cause the car to pull to one side; 2. Abnormal car steering system: This can also lead to the car pulling to one side, such as bending or deformation of the steering knuckle arm or steering knuckle, which generally causes the car to pull to one side; 3. Different tread patterns on both sides: If the wheels on both sides use tires with different tread patterns, or if the tires on both sides have inconsistent wear, this situation will also cause different friction levels between the tires and the ground, leading to the car pulling to one side during braking.
Was this review help?
13
0
Share
LaManuel
08/12/25 3:58am
Directional deviation is quite common, my old car used to do this all the time. Most cases are caused by significant tire pressure differences between left and right wheels, or incorrect four-wheel alignment data - especially when the toe angle is off. Suspension system issues could also be the culprit, like when shock absorbers have uneven damping (one side soft, one side hard), causing the car to pull toward the roadside. Last time I checked, it turned out to be a deformed tie rod - the mechanic said this often happens with frequent rough road driving. After replacing the part, the steering feels noticeably more stable now. I'd suggest checking these areas first.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Does the Oshan X7 have many fault issues?

Under normal maintenance conditions, the Oshan X7 generally does not have many fault issues. As the Oshan X7 is produced by Changan Automobile, a large company that strictly controls vehicle quality, there are usually no fault problems in the short term with normal usage. Below is a related introduction to the Oshan X7: 1. Dimensions: As Changan Oshan's first compact SUV, the Oshan X7 measures 4705×1860×1720mm in length, width, and height, with a wheelbase of 2780mm. It features a MacPherson strut independent front suspension and a multi-link independent rear suspension. 2. Powertrain: The Changan Oshan X7 is equipped with a 1.5-liter turbocharged four-cylinder engine across all variants. This engine delivers a maximum power of 131kw at 5500r/min and a maximum torque of 265N·m within a range of 1450~4500r/min. The engine incorporates DVVT technology and direct fuel injection, and uses an aluminum alloy cylinder head and block to reduce weight, thereby enhancing the vehicle's handling and fuel economy.
17
5
Share

What are the differences between the 2021 and 2020 Lexus ES models?

The only exterior differences are the rear badges and the sporty rear spoiler. The ES200 offers ample rear legroom, equipped with rear air vents and two USB ports. Here are the detailed specifications: 1. The 2020 model retains its original design: It continues to feature the brand's signature spindle grille design, giving the front fascia a bold and dynamic appearance. The large grille creates a strong visual impact, instantly recognizable as a Lexus. However, it lacks matrix LED headlights, while the daytime running lights below remain unchanged, delivering excellent illumination. The ES boasts a sleek and elegant side profile, exuding comfort. Its long hood and short rear deck proportions enhance its sporty character. 2. Keyless entry comes standard on all ES models: The overall styling shows no variation between trim levels, with the sole distinctions being the rear badges and sporty spoiler. The ES steering wheel is fully leather-wrapped, featuring multimedia controls and power adjustment. Higher trim levels add wood trim and heated memory functions, though the differences are minimal, making it one of the best-equipped models in its class.
10
0
Share

What is the battery model of the Baojun 630?

The battery model of the Baojun 630 is 6-QA-105D, 12v55a. Methods to extend the battery life of the Baojun 630: Avoid frequent vehicle starts: The interval between each engine start should exceed 5 seconds. If the first start fails, do not rush to repeatedly start. From the working principle of the car, continuous and uninterrupted starts of the electric motor can cause excessive battery discharge and damage. Turn off the air conditioning before shutting down the engine: Not turning off the air conditioning or allowing it to start with the Baojun 630 will cause the air conditioning system to automatically start and operate each time the ignition switch is turned on, resulting in an instant high power load on the vehicle and reducing the battery life. Before shutting down the engine, turn off the air conditioning first, then shut down the engine. Avoid long-term parking: The battery is charged by the generator during normal vehicle operation. If the vehicle is parked for a long time, the battery can easily lose power because many vehicles come with an alarm system that slowly drains the battery over time, eventually making it impossible to start the vehicle. It is best to start the Baojun 630 at least once a week for more than 5 minutes to recharge the battery.
5
3
Share

How to reset the tire pressure light on an Audi A3?

First, enter the main menu, locate the tire pressure monitoring system, and reset the tire pressure data. After successfully setting the data, save it, then exit the system and turn off the engine to complete the process. Below is some information about tire pressure: 1. Tire pressure, strictly speaking, refers to the air pressure inside the tire. In terms of car maintenance, the engine is the heart of the car, and its damage can lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and its level plays a crucial role in the car's performance and power. 2. Vehicle tire pressure monitoring generally comes in two types. One type uses the tire valve stem as a tire pressure sensor, connected to a control box inside the car for alerts and alarms. This system is usually independent, and many aftermarket tire pressure alarms use a similar structure. With this type, the alarm usually disappears after the tire pressure is replenished. 3. The other type is an analog alarm, which uses the distance traveled by the four wheels to estimate the tire pressure, thereby achieving the purpose of a tire pressure alarm. This type is usually pre-configured at the factory, but the pressure value can be set by the car owner.
2
0
Share

Will Insurance Cover a New Car if Mine is Flooded?

Insurance will not cover a new car if yours is flooded, but it can provide compensation according to the terms of the vehicle damage insurance. Here is some relevant information about vehicle insurance: Introduction: Vehicle insurance, also known as motor vehicle insurance or auto insurance, refers to a type of commercial insurance that covers personal injuries or property losses caused by natural disasters or accidents involving motor vehicles. Classification: Commercial insurance is an open policy and is divided into basic insurance and additional insurance, with the latter not being independently insurable. Basic insurance includes third-party liability insurance and vehicle damage insurance; additional insurance includes comprehensive theft insurance (theft insurance), on-board liability insurance, no-fault liability insurance, cargo drop liability insurance, standalone glass breakage insurance, vehicle downtime loss insurance, spontaneous combustion loss insurance, new equipment loss insurance, and no-deductible special insurance. Compulsory traffic accident liability insurance (also known as compulsory third-party liability insurance) also falls under the broad category of third-party liability insurance. Compulsory insurance is mandatory, and vehicles must have it to be driven on the road, undergo annual inspections, and be registered. In the event of third-party losses requiring claims, compulsory insurance must be paid out first before other types of insurance.
16
4
Share

What is the normal overnight power loss for a Tesla?

Tesla's overnight power consumption is approximately 0.5% to 1.5%. A full charge for a Tesla consumes about 100 kWh (for the Model S 100D variant). The official range of this model is 579 km, so the power consumption per kilometer can be calculated as 100 kWh / 579 km = 0.173 kWh. Pure electric vehicles eliminate the need for a fuel tank, engine, transmission, cooling system, and exhaust system. Compared to the internal combustion engine powertrain of traditional vehicles, the motor and controller in electric vehicles are less costly, and the energy conversion efficiency is higher. Since the energy source for electric vehicles—electricity—comes from large-scale power generation units, their efficiency is unmatched by small gasoline engines or even hybrid engines. As a result, the operating costs of pure electric vehicles are decreasing. The downside of pure electric vehicles is that they alter the traditional lifestyle of car usage, requiring daily charging. The conventional habit for car usage is refueling roughly once every one to two weeks. Additionally, each trip is limited to a few hundred kilometers in range.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.