What are the reasons for a car not supplying fuel and failing to start?

1 Answers
DeJuniper
07/29/25 2:55pm
Reasons for a car not supplying fuel and failing to start are as follows: Incorrect gear position: For automatic transmission models, if the gear is not in the P position when starting, the vehicle will not start. Therefore, it is necessary to enter the cabin and check whether the gear is in the P position. Battery depletion: Battery depletion is a significant reason for failure to start. Normally, the battery voltage must be above 12.4V to start the engine smoothly. If the battery is severely depleted, it must be replaced or jump-started. Starter motor damage: The starter motor is used to rotate the engine flywheel to start the engine. If it malfunctions, the engine will show no response when starting.
Was this review help?
6
2
Share
More Forum Discussions

Does the Yuexiang rear taillight have red?

The Yuexiang rear taillight has red. The left side of the Yuexiang's taillight assembly is red, while the right side is white. Introduction to rear taillights: Rear taillights are lights installed at the rear of a vehicle, typically with a main color of red. From an optical perspective, red light has the longest wavelength in the spectrum, making red objects visible from a great distance. Additionally, due to its strong penetrating power, red light remains highly visible in foggy or rainy conditions. Psychologically, red has a warning effect, creating an alert signal in the human brain, making people more cautious. Therefore, not only car taillights but also many warning or prohibition signs in daily life are red. Repairing a damaged rear taillight: First, check the bulb—if it's damaged, replace it. Then, inspect the wiring to see if it's due to a short circuit. Finally, check if the fuse is broken; if so, take it to a repair shop for replacement.
18
3
Share

What Causes Body Vibration After Installing Snow Tires?

The reasons for body vibration after installing snow tires are as follows: Poor Tire Balance: It may be due to poor tire balance. The owner should promptly perform a four-wheel alignment and dynamic balance. If the vehicle does not pull to one side, a dynamic balance of the tires may suffice. Deformed Steel Rims: This could be caused by deformed steel rims, requiring the owner to visit a professional repair shop for inspection. This condition generally occurs in vehicles that have been in use for a long time. Typically, when replacing new tires or steel rims, a tire balance should be performed. Otherwise, an uneven weight distribution can easily cause the steering wheel to vibrate. Body vibration affects both driving comfort and handling judgment. Unbalanced Drive Shaft: This is caused by deformation and imbalance of the drive shaft, a condition more common in vehicles that have experienced undercarriage collisions.
7
5
Share

What Causes the Noise When Rolling Down the Car Window?

Window noise may be caused by dust in the window rubber guide channel or aging of the window rubber. The specific reasons for the noise during window operation are as follows: 1. Accumulation of a large amount of dust in the window rubber guide channel: If noise occurs during window operation, it is likely due to a significant buildup of dust in the window rubber guide channel. This increases resistance during the operation. Moreover, if the dust contains some particles, it can produce noise. In such cases, simply wet a cloth with water, wrap it around one end of a chopstick, and secure it with a rubber band. Then, insert this end into the glass guide channel and slide it back and forth to clean. 2. Aging of the window rubber: Besides dust accumulation, aging of the window rubber can also cause noise during window operation. This can be addressed by using lubricating oil. Spray it on the rubber to lubricate and maintain the rubber's flexibility, reducing the likelihood of cracking.
19
0
Share

How to Identify Vehicle Brands?

Identifying vehicle brands can be done based on their product logos, body styles, and engine types. Product Logos: The car emblem refers to the various brand logos of automobiles. It is primarily used for vehicle identification, and these emblems represent automotive companies. Car logos include trademarks or manufacturer logos, product labels, engine models and serial numbers, vehicle models and serial numbers, as well as vehicle identification codes. Body Styles: This refers to distinguishing vehicles based on their general structure or external features, such as the number of doors and windows, cargo-carrying characteristics, and roof styles. Engine Types: This refers to the characteristics of the power unit, such as the type of fuel used, the number of cylinders, displacement, and static braking power. Engines installed in passenger cars, multi-purpose passenger vehicles, or trucks with a gross vehicle weight rating of 10,000 lb or less should be marked with the professional manufacturer's name and model.
7
1
Share

How many kilometers should a Volkswagen car replace the spark plugs?

Volkswagen cars should replace the spark plugs every 30,000 kilometers. The specific replacement time should be based on the owner's manual, and it should also be determined according to the car's usage, the quality of the fuel, and personal driving habits. If the fuel quality is poor and the engine does not burn completely, it will cause carbon deposits on the spark plugs, shortening their service life. Volkswagen is a German automobile manufacturing company headquartered in Wolfsburg, Germany. Taking the Tiguan as an example: it is a compact SUV launched by SAIC Volkswagen, with a length, width, and height of 4506mm, 1809mm, and 1685mm respectively, and a wheelbase of 2684mm. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kw, matched with a 6-speed automatic transmission.
17
3
Share

How to Pull Out a Small Dent on the Car Door?

Methods to pull out a small dent on the car door: First, clean the dented area thoroughly. Load the special glue into the glue gun, plug in the power to preheat, and select an appropriate shim. Apply the melted glue evenly on the shim using the glue gun, then quickly attach it to the dented area. Align the hole in the center of the pull bridge with the glued shim, tighten the nut onto the shim screw rod, and remove the tools after the repair is completed. Spray alcohol on any residual glue on the car body and clean it off with a scraper. If you don't trust your DIY skills, it's better to leave it to the repair shop staff. The principle is similar to doing it yourself—both involve using tools to suction out the dented area with a suction cup, then inserting a hook behind the dented area to slowly push it out. Finally, use a rubber hammer to treat any protruding parts.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.