···
Log in / Register

What Are the Reasons for a Car Not Starting in Winter?

1 Answers
StJoel
07/24/25 4:09pm
In winter, if a car fails to start, it can be analyzed from four aspects: spark plugs, oxygen sensors, throttle and intake passages, and fuel injectors: 1. Spark Plugs: During operation, especially in winter, symptoms like reduced power, engine shaking, and difficulty starting may occur. This could be due to carbon deposits on the spark plugs or loose ignition coils, leading to starting difficulties. Simply replacing the spark plugs can resolve this issue. 2. Oxygen Sensor: If the oxygen sensor is faulty, it can cause inaccurate fuel injection, resulting in a suboptimal air-fuel ratio in the engine. A significant deviation from the optimal ratio can make the engine hard to start. 3. Throttle and Intake Passages: Dirty throttle and intake passages can also lead to carbon buildup and blockages. In summer, this might manifest as noticeable shaking at idle, while in winter, it can cause difficulty starting the engine. 4. Fuel Injectors: Carbon deposits clogging the fuel injectors or impurities blocking the fuel pump's filter can both lead to the car not starting or having difficulty starting in winter.
Was this review help?
19
3
Share
More Forum Discussions

What is the wading depth of electric vehicles?

The maximum wading depth for the vast majority of electric vehicles is 300mm. Here are some additional details: 1. Electric vehicles have better wading performance than fuel-powered vehicles. This is because their powertrain systems are more enclosed, lacking exhaust pipes, and the grilles are mostly sealed, thus avoiding water intrusion issues. 2. Never attempt to wade through water during short-term heavy rain or storms without knowing the road conditions. This is to prevent the risk of vehicle submersion due to excessively deep water. If you cannot determine the water depth, it is advisable to choose an alternative route. 3. After an electric vehicle has been submerged for an extended period and is rescued, avoid attempting to restart the powertrain system. First, have professional technicians conduct appropriate inspections on the high-voltage system components and battery pack. It is recommended to let the vehicle remain stationary for a period before sending it to a repair shop for further inspection and maintenance.
2
5
Share

How Many Types of Motor Braking Methods Are There?

There are three types of motor braking methods, including plugging (reverse current) braking, dynamic (rheostatic) braking, and regenerative braking. A braking motor is a fully enclosed, self-ventilated, squirrel-cage type three-phase asynchronous motor equipped with an additional disc-type DC brake. It consists of a Y-series motor with an additional DC disc-type electromagnetic braking motor installed between the rear end cover and the fan, making it a derivative series of the Y-series. Below is additional information: 1. Plugging Braking: To achieve rapid stopping, the armature voltage of a running motor is suddenly reversed, and a resistor is connected in series in the armature circuit. This is called plugging braking. 2. Dynamic Braking: This refers to suddenly disconnecting the armature power supply of a running DC motor and then connecting a braking resistor in series in the armature circuit, causing the inertial energy of the armature winding to be dissipated in the resistor, thereby achieving rapid braking of the motor. 3. Regenerative Braking: Also known as feedback braking, it is a braking technology used in electric vehicles. During braking, the kinetic energy of the vehicle is converted and stored rather than being wasted as heat.
13
4
Share

What to Do When the Exhaust Pipe Gets Waterlogged?

When a car's exhaust pipe gets waterlogged, you can take it to a 4S shop for a simple cleaning and drying, which will allow the engine to function normally. If the exhaust pipe is waterlogged and the engine stalls, do not attempt to force a restart. Instead, immediately call for roadside assistance.
7
1
Share

What to Do If ID Card Is Lost During Driver's License Test?

If the ID card is lost during the driver's license test, you can apply for a new ID card or a temporary ID card. Here is a brief introduction to the driver's license: 1. Basic Information: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license." It is a license required by law for motor vehicle drivers. The motor vehicle driver's license is a legal document issued by the administrative authorities to individuals who have legally learned to drive a motor vehicle, mastered traffic regulations and driving skills, and passed the relevant tests, permitting them to drive a certain type of motor vehicle. 2. Function: Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive recklessly. Generally, individuals cannot drive on the road without a license. However, those who have acquired safe driving skills are allowed to drive vehicles on the road. This permission is granted through the "driver's license," which serves as a "license certificate."
3
4
Share

Can Low-Speed Branches Scratch Car Paint?

Low-speed branches may cause minor scratches on the car paint. It's obviously not suitable to claim through car insurance, nor is it necessary to go to a car beauty shop for repair. However, if minor scratches on the car are left untreated, they can easily lead to rust on the car paint surface, which is detrimental to future maintenance. Therefore, it is advisable to use a touch-up pen or toothpaste for treatment. Below is additional information: 1. If the rust is not severe, you can first use very fine water sandpaper dipped in water to gently remove the rust spots, but avoid grinding randomly without direction—always grind in straight lines in the same direction. After completely cleaning the area, apply a layer of primer. 2. If the original factory paint is not available, you can purchase a touch-up pen and use it for color application. 3. You can also use ordinary toothpaste to treat the scratches. When you notice new small scratches on the car body, gently apply the toothpaste in circular motions over the scratched area.
19
4
Share

What is BYD's Mobile Power Station?

BYD's Mobile Power Station is a technology that can directly utilize the vehicle's power to provide 220V, 3.3KW power output, enabling electricity extraction and usage. Here are some related introductions about BYD: 1. Appearance: The BYD model is a mid-size SUV with a wheelbase of 2820 mm, and its length, width, and height are 4870 mm, 1940 mm, and 1720 mm respectively. 2. Configuration: The entire series is equipped with a 2.0-liter turbocharged engine. This engine delivers 192 horsepower and a maximum torque of 320 Nm. The engine's maximum power speed is 5500 rpm, and the maximum torque speed ranges from 1500 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.