···
Log in / Register

What are the reasons for a car not starting and the screen flickering?

3 Answers
RyleeRose
09/02/25 3:32am
Here is an introduction to the reasons why a car may not start and the screen flickers: 1. Circuit or electronic failure: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor head, damaged spark plug. Electronic failure mainly refers to the malfunction of the central computer control board. 2. Fuel system failure: stalling caused by fuel system issues often presents symptoms such as weak engine power and a soft accelerator pedal. Possible locations of fuel system failures include: malfunctioning fuel pump, blocked fuel line, clogged fuel filter, failed carburetor, damaged injector, etc. Sometimes, it could also be due to an empty fuel tank that the owner is unaware of. 3. Mechanical failure: broken timing belt (chain), cylinder leakage with no pressure, etc. The second scenario is when the starter does not work or barely functions. In this case, the first thing to check is the battery or accumulator.
Was this review help?
2
4
Share
McDaniel
09/14/25 5:48am
My car had the same issue the other day—it wouldn't start, and the screen was flickering. It's mostly due to a weak battery. Either the battery is old and can't hold a charge, or you forgot to turn off the lights, draining the power. The screen flickers because of low voltage, causing the onboard computer to act erratically and fail to boot. This problem is especially common in cold weather or if the car hasn't been driven for a long time. The solution is to ask a friend for a jump-start, then drive around to recharge the battery. If the battery's lifespan is over, it's best to replace it early to avoid worse issues next time. Screen flickering might also be triggered by the anti-theft system—try unlocking with the key and restarting. In any case, avoid forcing a start to prevent damaging other components. Developing a habit of turning off electrical devices can help prevent such problems.
Was this review help?
14
5
Share
Expand All
LeJonathan
10/28/25 6:30am
I've had a similar experience - failure to start plus flickering screen. The first things that come to mind are insufficient battery voltage or connection issues. It's normal for battery performance to degrade after several years of use, and corroded/loose wiring can also cause power interruptions. Additionally, a faulty alternator that can't charge properly may cause voltage fluctuations leading to screen flickering. My suggestion is to first check battery terminals to ensure they're tight and corrosion-free, then measure voltage with a multimeter - avoid repeated ignition attempts if it's below 11 volts. For prevention, have battery health checked during regular maintenance and avoid prolonged parking. Loose alternator belts or regulator failures can also cause problems - get them fixed promptly to prevent bigger troubles.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is the fuel consumption of the new Baojun 510 automatic transmission model?

Baojun 510 has a fuel consumption of 6.3 liters per 100 kilometers. Method for calculating fuel consumption: Vehicle fuel consumption is calculated based on the fuel consumed per 100 kilometers (commonly referred to as 100 kilometers). The actual fuel consumption calculation method: average fuel consumption = (total fuel added - last fuel added) / mileage. In simple terms, fill up the fuel tank, note the mileage (the vehicle can also record it automatically), run until half the fuel is consumed, then refill the tank. Before refueling, check the mileage, calculate the distance traveled, and divide the distance by the amount of fuel added this time. Factors affecting fuel consumption: In fact, factors such as vehicle weight, tires, wind resistance, and load can also affect fuel consumption performance. Therefore, to achieve better fuel economy, avoid high engine RPM operation, and you can release the throttle to let the vehicle coast downhill. Replacing low rolling resistance tires can also help save fuel to some extent.
1
2
Share

What Causes the BMW 5 Series Keyless Entry to Be Unresponsive?

Reasons for the BMW 5 Series keyless entry being unresponsive: Typically, when the key fob fails to unlock the car door, there are two possibilities—either the car's battery is dead, or the key fob battery is running low. Keyless Entry: With the key fob on your person, the vehicle can detect its presence upon entering, allowing you to start the car simply by pressing the ignition button. Additionally, the GLK300 luxury model features an electric tailgate closing function. A light press of the button on the tailgate automatically closes and locks it, which is particularly convenient and labor-saving for petite women. Keyless Entry Principle: The car keyless entry system, abbreviated as PKE, utilizes the world's most advanced RFID radio frequency technology and vehicle identity recognition system. It pioneers a compact, low-power RF antenna development solution, successfully integrating remote control and keyless systems while maintaining traditional vehicle circuit protection. This achieves a true dual RF system with double anti-theft protection, offering maximum convenience and security for car owners. The keyless system is not a traditional key but a smart key or smart card.
5
1
Share

What are the reasons for Audi CUH engine burning oil?

Audi cars burning oil is usually caused by the use of unqualified engine oil, the engine cylinder block material being cast iron, piston rings sticking due to carbon deposits and reduced elasticity, decreased cooling system efficiency of the engine, contamination of the crankcase ventilation pipeline and solenoid valve, among other reasons. Introduction to oil burning: "Burning oil" refers to the engine oil entering the combustion chamber of the engine and participating in combustion along with the air-fuel mixture. Hazards of burning oil: The phenomenon of "burning oil" in vehicles can cause the oxygen sensor to fail prematurely, leading to increased carbon deposits in the combustion chamber, unstable idling, lack of acceleration power, increased fuel consumption, excessive exhaust emissions, and other adverse effects. In severe cases, insufficient engine lubrication can cause irreparable damage to the engine or even render it unusable, significantly increasing repair costs and posing potential safety hazards.
2
1
Share

What is the hourly fuel consumption of the Cater 320d?

The Cater 320d has an hourly fuel consumption of 16.44 liters. Fuel consumption is related to the working environment: Fuel consumption is affected by whether the working environment is harsh, such as in mines, which require higher kinetic energy and thus result in higher fuel consumption for the Cater 320d. Fuel consumption is related to the working state: Prolonged idling, where the engine runs without load (i.e., when the excavator is not operating but the engine continues to run), can significantly increase fuel consumption. In daily operations, many construction sites have equipment idling for 40-50% of the time, leading to higher fuel consumption for the Cater 320d.
3
0
Share

What is the fuel consumption of the Geely Vision automatic transmission?

Geely Vision automatic transmission has a combined fuel consumption of 6.1L/100km. Currently, there are 7 models of Geely Vision automatic transmission available for sale, including the CVT Premium, CVT Asian Games Edition, and CVT Value Edition, all with a combined fuel consumption of 6.1L/100km. The above figures are NEDC combined fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.9-9.7L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. If the oxygen sensor is damaged, the exhaust pipe will emit darker exhaust gas during driving, and the oxygen sensor should be replaced. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
6
4
Share

Does a small car battery need to be replaced after three years of use?

Whether the battery needs to be replaced depends on whether it can function properly. Normal battery replacement cycle: If the car is equipped with the original battery, its correct service life is 3-4 years. If the battery can still function normally, there is no need to replace it. Replacement should only be considered if the battery fails to start the engine or cannot hold a charge. Signs that the battery needs replacement: The battery status indicator light turns on, the vehicle is harder to start than usual, requiring more than one attempt to ignite, or when idling during night driving, the battery's lifespan is insufficient, and it cannot provide enough power for adequate lighting, causing the lights to noticeably dim.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.