What are the reasons for a car not starting after being parked for a long time?

1 Answers
Mackenzie
07/30/25 2:49am
The reasons for a car not starting after being parked for a long time are: 1. The car battery is dead; 2. Low temperature reduces the viscosity and rotation speed of the engine oil; 3. Issues with the ignition system; 4. Insufficient fuel in the car; 5. Excessive carbon deposits inside the vehicle's engine; 6. Damage to the fuel pump, preventing fuel in the tank from being supplied for combustion. The solutions are: 1. Check if the battery is dead; 2. Check if the fuel pump is damaged; 3. Check if there is sufficient fuel; 4. Check if the engine sensors are damaged; 5. Check if there are issues with the ignition system; 6. Use a heating rod to warm up the engine oil.
Was this review help?
13
0
Share
More Forum Discussions

What is the recommended speed during the car break-in period?

During the break-in period, it is recommended to drive at a speed of 50 to 80 kilometers per hour, and it is crucial to control the driving speed to avoid excessive speeds. Below is relevant information: 1. After driving over 1,500 kilometers, you can gradually increase the engine speed and vehicle speed to the maximum allowed by the vehicle, but avoid pressing the accelerator pedal too hard. This ensures that components such as pistons, cylinders, and other important parts increase their load under moderate conditions. 2. The break-in period generally refers to the process where mechanical parts initially come into contact, rub against each other, and mesh together. For cars, the break-in period refers to the initial driving phase of a new car or after a major overhaul, typically covering 1,000 to 1,500 kilometers. This is the essential mileage required to ensure that mechanical parts fully contact, rub, adapt, and settle into their final form.
19
3
Share

Is a Renewal Insurance Deposit Required for Car Loans?

Yes, generally after purchasing a car on loan at a 4S dealership, to mitigate risks, the dealership will require the consumer to pay a renewal insurance deposit. After paying this deposit, the car owner must purchase insurance from the same 4S dealership in the following year. The amount of the renewal insurance deposit can be negotiated between the consumer and the 4S dealership. Additional Information: 1. Under normal circumstances, the renewal insurance deposit will be refunded by the 4S dealership according to the contract terms after the car owner has fully paid off the car loan. The amount of the deposit can be discussed with the dealership to ensure mutual satisfaction. 2. When signing the car purchase contract, consumers should carefully read the terms related to the renewal insurance deposit. They need to understand whether the deposit can be refunded after clearing the loan if they do not purchase car insurance from the 4S dealership during the loan period. It is advisable to fully comprehend the deposit terms before signing the contract to maintain some level of control. 3. The renewal insurance deposit is not necessarily a bad thing. For the dealership, it serves as an additional profit channel. For the car owner, paying the deposit can serve as a good reminder to purchase car insurance, preventing oversight due to a busy schedule.
8
4
Share

How to Determine if the Steering Ball Joint Has Issues?

Problems with the steering ball joint can cause the following symptoms in a car: deviation while driving, unusual noises during operation, increased play in the steering wheel, steering wheel vibration, and difficulty in turning. Below is relevant information: 1. If the inner ball joint is damaged, there will be significant play when turning left or right, unstable steering direction while driving, unusual sounds when turning, or a sensation similar to the brakes being stuck. The steering gear, also known as the steering box, is the most critical component of a car's steering function. 2. Most newly released models are now equipped with electro-hydraulic or electric power steering systems, while mechanical steering gears are gradually being phased out. Generally, vehicle steering wheels have an automatic return-to-center function. For cars equipped with hydraulic power steering, this function is somewhat weakened due to the hydraulic damping effect.
6
2
Share

Right Side Brake or Left Side?

In manual transmission vehicles, the right pedal is the accelerator; the middle pedal is the brake; and the left pedal is the clutch. Here is some relevant information: 1. For automatic transmission models, based on ergonomic design, most people are accustomed to using their right hand and right foot, making the right side more flexible and powerful. Since the accelerator needs to be pressed continuously and the brake requires quick and easy access, both the brake and accelerator are designed on the right side. The brake and accelerator pedals are placed on the front side of the right foot, with a certain gap between them, and the brake pedal is slightly higher than the accelerator pedal. This design facilitates quick reactions from the driver. The correct operating method is to pivot the right heel and use the sole of the foot to press the pedals. 2. For manual transmission models, the driver's two legs need to control three pedals, and it is impossible to press the brake and accelerator simultaneously. If an accidental operation causes both pedals to be pressed, the vehicle's electronic system will intervene, and the ECU will prioritize braking. Therefore, the left foot controls the clutch, while the right foot controls the brake and accelerator, which is the most scientific design.
19
3
Share

How to tell if the fuel filter is dirty?

If you notice increased fuel consumption and unstable idle speed, it's likely that the fuel filter is dirty and needs replacement. Here are some precautions for filter replacement: 1. Before removing the fuel filter, always follow the manufacturer's specified steps to release residual pressure in the fuel system. Otherwise, gasoline may spill, which could pose serious personal safety risks. 2. During the fuel filter replacement process, absolutely avoid smoking or using open flames nearby, as this presents significant safety hazards. 3. Additionally, when replacing the fuel filter, it's advisable to also replace the engine oil, oil filter, and air filter. Filters have inlet/outlet arrow markings - be careful not to install them backwards during replacement.
16
2
Share

Where is the cabin air filter located in the Ford Explorer?

Ford Explorer's cabin air filter is located behind the glove box on the passenger side. After removing the glove box, you can see the cover of the cabin air filter, and opening the cover allows you to replace the filter. The main function of the cabin air filter is to filter impurities from the air, providing clean air for the engine's operation. The Ford Explorer is a large SUV introduced by Ford, with dimensions of 5064 mm in length, 2005 mm in width, 1798 mm in height, and a wheelbase of 3025 mm. The Ford Explorer comes standard with a 12.8-inch central control screen, featuring the SYNC+ 2.0 intelligent infotainment system. The instrument panel adopts a full LCD mode, allowing theme changes corresponding to sport, economy, and snow modes. The steering wheel supports four-way electric adjustment, and the multifunction buttons include multimedia control, adaptive cruise control, and voice recognition functions.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.