What are the reasons for a car clutch not returning to its proper position?

1 Answers
OCarson
07/30/25 2:33am
The reasons for a car clutch not returning to its proper position are: 1. Failure of the return spring; 2. Insufficient return force of the clutch pedal spring; 3. Incorrect method of depressing the clutch. The clutch is a device that transmits the engine power of a car in an on-off manner to the axle, installed between the engine and the transmission, and is the assembly component in the car's drivetrain that directly connects with the engine. The maintenance methods for the clutch are: 1. Clean thoroughly before installation to remove anti-rust grease and debris; 2. For wet electromagnetic clutches, it is necessary to add lubricating oil between the friction plates during operation; 3. During coaxial installation, the axial direction needs to be fixed to avoid axial movement between the driving part and the driven part; 4. During split-shaft installation, the coaxiality between the driving part and the driven part shaft should not exceed 0.1mm.
Was this review help?
4
2
Share
More Forum Discussions

Is Replacing the Left Front Fender Considered an Accident Vehicle?

Replacing the left front fender is considered an accident vehicle. Fenders are divided into two types: front fenders and rear fenders, which are exposed on the exterior of the car body and serve to protect the car's chassis and body. If a fender has been replaced or cut, the vehicle is classified as an accident vehicle. Below are the impacts of replacing a front fender on the car: Replacing the front fender does not affect the car's performance, but it will impact the vehicle's resale value. Since replacing a fender classifies the car as an accident vehicle, it gives buyers the impression that the car has been repaired. Even if the vehicle's performance remains unchanged, in the eyes of buyers, it is not worth the normal market price, leading to depreciation of the car.
19
0
Share

Is it necessary to adjust the car seat if my feet are too small to reach the brake pedal comfortably?

It is necessary to adjust the car seat if your feet are too small to reach the brake pedal comfortably. You can move the seat forward. Below are specific techniques for smooth braking: 1. Stopping: When you need to stop the car during normal driving, press the brake pedal once and release, then press it again. Repeat this process to bring the car to a gradual and stable stop. 2. During braking: Avoid stomping on the brake pedal abruptly, as this can cause the driver and passengers to lurch forward. Leave some room for adjustment. 3. Rough roads: When stopping on uneven or bumpy roads, avoid slamming on the brakes. These roads often have loose gravel or stones, and sudden braking can cause the tires to skid. 4. Long downhill sections: Use engine braking to assist and avoid harsh braking. Applying intermittent braking (pumping the brakes) can help the vehicle slow down smoothly.
3
1
Share

What is the speed limit on the Shenji Expressway?

Shenyang section speed limit is 120, Jilin section speed limit is 100. The following is a detailed introduction about expressway speed limits: 1. Maximum speed: Expressways should indicate the driving speed of lanes. The maximum speed should not exceed 120 kilometers per hour, and the minimum speed should not be lower than 60 kilometers per hour. On expressways, the maximum speed for small passenger vehicles should not exceed 120 kilometers per hour, for other motor vehicles it should not exceed 100 kilometers per hour, and for motorcycles it should not exceed 80 kilometers per hour. 2. Minimum speed: According to the "Road Traffic Safety Law Implementation Regulations", if there are 2 lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour; if there are 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour. If the speed indicated by road speed limit signs is inconsistent with the above lane speed regulations, drive according to the speed indicated by the road speed limit signs.
13
5
Share

What are the causes of abnormal noise during transmission downshifting?

The causes of abnormal noise during transmission downshifting are: 1. Faults in the transmission's clutch, brake, buffer, or valve plate; 2. Insufficient transmission fluid. The functions of the transmission: 1. To change the transmission ratio and expand the range of torque and speed variation of the driving wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse while maintaining the engine's rotation direction; 3. To interrupt power transmission using neutral gear, allowing the engine to start, idle, and facilitating gear shifting or power output. Transmission maintenance: 1. Regularly change the transmission fluid; 2. Frequently check the fluid level; 3. Avoid coasting in neutral; 4. Clean the transmission periodically; 5. Avoid forcibly disengaging gears; 6. Reduce the time spent idling to warm up the vehicle.
18
2
Share

Is 92 or 95 octane gasoline better?

Gasoline octane ratings do not indicate quality, but rather reflect different ratios of isooctane. Whether to use 92 or 95 octane gasoline, it is recommended to carefully read your vehicle's owner's manual, which typically provides recommendations and detailed explanations. The fuel tank may also have labeling indicating the appropriate octane rating. Gasoline octane rating: The octane rating represents the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. Higher octane ratings indicate stronger anti-knock performance. Standard gasoline is composed of isooctane and n-heptane. Higher octane ratings are not necessarily better; the appropriate gasoline octane should be selected based on the engine's compression ratio. Difference between 92 and 95 octane: The gasoline octane rating represents the gasoline's octane number. For example, 92 octane gasoline consists of approximately 92% isooctane and 8% n-heptane. Since isooctane has better anti-knock properties and n-heptane has poorer anti-knock properties, higher octane ratings indicate higher octane numbers, meaning the gasoline has better anti-knock performance.
11
3
Share

What to do if the driver's license has expired for three days?

If your driver's license has expired for three days, the renewal process is the same as the normal renewal procedure. The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. In addition to applying for renewal at the vehicle management office, you can also apply for renewal through the following methods: Renewal through the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the information. The new license is generally delivered by mail. Visit the "Police-Medical-Post" service point at a postal business hall to handle the renewal. The entire process, from registration to medical examination and new license production, takes only half an hour. Currently, only a few cities have this service, such as Hangzhou.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.