What Are the Reasons for a Car Air Conditioner Blowing Hot Air?

2 Answers
VanAdrian
07/28/25 11:39pm
Car air conditioner blowing hot air: lack of refrigerant, malfunctioning condenser fan, or dirty air filter. A common reason for a car air conditioner not cooling is the lack of refrigerant, which can be resolved by simply adding refrigerant; if the condenser fan is malfunctioning, it requires repair at a service center, and if the issue is due to a dirty air filter, replacing the filter will suffice. The car air conditioner is designed to regulate and control the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to optimal conditions, providing a comfortable environment for passengers, reducing travel fatigue, creating favorable working conditions for the driver, and serving as a crucial ventilation device to ensure safe driving.
Was this review help?
1
5
Share
Athena
08/12/25 3:59am
There are usually several reasons why a car's air conditioning blows hot air. For example, refrigerant leakage—the substance that makes the air conditioning cold—if it leaks or is insufficient, the system cannot cool properly, resulting in hot air. Compressor failure can also cause issues; the compressor is responsible for compressing gas, and if it breaks or stops working, the entire cooling cycle fails. Another possibility is incorrect temperature settings, where someone might accidentally turn the thermostat knob to the hot air mode. Additionally, problems with the blend door or actuator can affect airflow direction, causing hot air to replace cold air. I've encountered a similar situation before—after checking, it turned out to be low refrigerant levels, and adding some fixed the issue. It's recommended to start with simpler checks, such as verifying the thermostat settings and considering whether the system automatically switches to hot air for protection when external temperatures are extreme. Regular maintenance can help reduce risks.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Is it easy to obtain a DiDi operation license?

DiDi operation license is easy to obtain. The following is the relevant introduction about DiDi operation license: Transfer materials: Company license, road transport license; current company license, road transport license; registration certificate, driving license, photos; transfer application form, power of attorney, handler's ID card; each page needs to be stamped with the official seal. Processing procedure: Obtain the pre-approval notice of individual business name from the industrial and commercial department; apply for the road operation license; receive the business license; receive the tax registration certificate; register the vehicle at the vehicle management office (transfer the out-of-town vehicle to the individual business name approved by the industrial and commercial office); receive the operation license.
3
2
Share

What is the 0-100 km/h acceleration time of the Haval H5?

The 0-100 km/h acceleration time of the Haval H5 is 12.46 seconds. The Haval H5 is a compact SUV launched by Haval Motors. In terms of body dimensions, its length, width, and height are 4645mm, 1800mm, and 1775mm respectively, with a wheelbase of 2700mm. Regarding safety features, the vehicle comes standard with Bosch ninth-generation ESP, tire pressure monitoring, BA brake assist, front pre-tensioned seat belts, and rear three-point seat belts. In terms of power, the Haval H5 is equipped with a 2.0-liter inline 4-cylinder turbocharged engine across the entire lineup, with a maximum power output of 100 kilowatts.
13
4
Share

Does a 50-Jin Reduction in Vehicle Weight Significantly Impact Acceleration?

Reducing the vehicle weight by 50 Jin has a minimal impact on acceleration, not exceeding 2%. The key factors influencing a car's acceleration performance are as follows: 1. Transmission System: The higher the efficiency of the transmission system and the smaller the power loss, the faster the acceleration under the same engine power output. 2. Drive Type: During acceleration or hill climbing, the vehicle's center of gravity shifts backward, increasing rear-wheel traction. In such scenarios, rear-wheel-drive (RWD) vehicles demonstrate acceleration advantages. Conversely, all-wheel-drive (AWD) models exhibit unparalleled superiority when road-tire friction is low. 3. Tire Factors: Generally, wider tires provide better grip, reducing slippage during acceleration, but also increase rolling resistance.
7
5
Share

What Transmission Does the Lingxuan Use?

Lingxuan employs three types of transmissions in total: a 5-speed manual transmission, a 6-speed manual transmission, and a 6-speed automatic transmission (6AT). In theory, the more gears a car's transmission has, the better, because a higher number of gears allows for closer gear ratios. The AT transmission is connected to the engine via a torque converter, which contributes to smoother gear shifts. All Lingxuan models feature front-wheel drive. In terms of suspension, it uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The vehicle's dimensions are 4730mm in length, 1795mm in width, and 1730mm in height.
17
1
Share

What is the notation for China 6 emission standard?

China 6 should be represented as China VI. It refers to the National Sixth Stage Emission Standards for Motor Vehicle Pollutants. Below is an introduction to relevant knowledge about China 6: 1. Issuing Authority: The standard was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine. 2. Implementation Status: In February 2019, the Beijing Municipal Bureau of Ecology and Environment released the "Notice on the Implementation of the Sixth Stage Motor Vehicle Emission Standards in Beijing (Draft for Comments)" to solicit opinions from relevant units. Beijing will implement the sixth stage motor vehicle emission standards ahead of schedule. 3. Purpose: It can meet the requirements of key regions to tighten vehicle emission standards for accelerating the improvement of ambient air quality.
6
1
Share

What are the effects of transmission oil leakage?

Transmission oil leakage has the following effects: 1. If oil leaks from multiple locations in the transmission and the housing temperature is relatively high, it is usually caused by the vent plug on the transmission cover being blocked by dust and mud, which reduces ventilation efficiency; 2. The heat and oil vapor generated by the gears inside the housing during high-load, high-speed rotation cannot be dissipated in time, leading to higher internal pressure than the external atmospheric pressure and elevated oil temperature, which causes the lubricating oil to become overly thin; 3. After the lubricating oil leaks, it will result in a shortage of gear lubricating oil, leading to premature wear and damage to components such as gears and bearings, shortening the service life of the transmission, while also polluting the environment.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.