What are the reasons for a black screen on the car's central control display?

1 Answers
JoshuaLynn
07/25/25 1:08pm
The reasons for a black screen on the car's central control display are: 1. The car's power voltage is unstable; 2. There is a problem with the cable on the back of the central control display. The solutions for a black screen on the car's central control display are: 1. Check whether the host power supply is properly connected and whether the voltage is stable; 2. Check whether the data cable connector of the display is in good contact with the signal output interface of the graphics card; 3. Check whether the car module has failed. The car's central control display includes the central control door lock system, central console, and audio control panel. Its functions are: 1. The central lock actuator can be used to execute the driver's instructions to lock or unlock the door; 2. Control the adjustment of memory seats, music system adjustment, entertainment system adjustment, roof camera function, and automatic parking function.
Was this review help?
14
3
Share
More Forum Discussions

Where Can I Get My Car Wheels Repaired?

For wheel repairs, it is advisable to seek out facilities that specialize in original factory wheel repair processes to ensure the repaired wheels are safe for use. Below is relevant information about wheels: 1. Introduction: The wheel hub is the rotating part of the tire's inner rim connected to the wheel core via spokes, which is the metal component mounted on the axle that supports the tire. It is also known as the rim, steel ring, or wheel. Wheels come in various types based on diameter, width, manufacturing method, and material. 2. Types of Wheels: Wheels are also called rims. Depending on the characteristics and requirements of different vehicle models, the surface treatment processes for wheels vary, mainly categorized into painting and plating. For standard vehicle models, wheels are less focused on appearance, with good heat dissipation being a basic requirement. The process typically involves painting, which includes spraying followed by baking, offering a cost-effective solution with vibrant colors and long-lasting durability. Even when the vehicle is scrapped, the color of the wheels remains unchanged.
20
1
Share

Why does the car still not start after replacing the battery?

If a car with a newly replaced battery still fails to start, it could be due to a discharge fault in the vehicle's electrical circuit or poor battery charging. 1. If charging appears normal but the new battery loses power within a few days, there might be a self-discharge issue in the circuit, which should be checked with a multimeter. 2. If the battery regains charge after running the engine for a while, the charging system is likely functioning, but the rectifier might be damaged. 3. The battery, also known as an accumulator, plays a crucial role in starting the vehicle. If the battery is undercharged or dead, the car won't start. Therefore, battery maintenance should not be overlooked during routine vehicle care. 4. The primary functions of the battery are to store and discharge electricity, providing sufficient power for starting the car. When the battery malfunctions, the vehicle cannot start in cold conditions, and the electricity generated by the alternator during driving cannot be stored, potentially leading to symptoms like stalling in severe cases.
12
3
Share

Is it illegal if the car logo falls off?

It is illegal if the car logo falls off. If the car logo is accidentally lost, the proper method is to bring your ID card, relevant purchase documents of the vehicle, and the vehicle license, along with the compulsory insurance proof, to the insurance company to apply for a replacement logo. Overview of Car Logos: Car logos refer to the brand emblems of various automobile manufacturers, which often serve as representatives of the car companies. Car logos include: the vehicle's trademark or manufacturer's emblem, product labels, engine model and serial number, vehicle model and serial number, as well as the vehicle identification number (VIN), etc. Function of Car Logos: The purpose is to facilitate sellers, users, maintenance personnel, and traffic management departments in identifying the vehicle's 'identity.' According to Chinese regulations, these logos must be inspected during new vehicle registration and annual inspections.
10
5
Share

Misreading the Traffic Light: Does Driving Halfway Through a Red Light Count as Running a Red Light?

Misreading the traffic light and driving halfway through a red light does not count as running a red light. If you stop halfway in the middle, it is not considered running the light. However, if you continue driving and safely pass through the opposite intersection, it will be counted as running a red light, which incurs a fine and a deduction of 6 points. To establish a red-light violation, three pieces of photographic evidence are required: 1. The vehicle has not crossed the stop line, and the signal light is already red; 2. The rear of the vehicle has crossed the stop line while the light is still red; 3. The vehicle has passed the opposite stop line and proceeded normally. Although driving halfway through a red light will not be penalized as running a red light, there will still be a penalty. If the entire vehicle body has crossed the stop line, it will be considered as stopping beyond the line, resulting in a 2-point deduction.
13
3
Share

What are the indicators of gasoline?

Gasoline's main indicators include octane number, gum content, distillation range, vapor pressure, sulfur content, etc. 1. Volatility: Refers to the ease with which gasoline evaporates in the carburetor. It has a significant impact on engine starting, warm-up, acceleration, vapor lock, and fuel consumption. The volatility of gasoline is comprehensively evaluated by three indicators: distillation range, vapor pressure, and vapor-liquid ratio. 2. Anti-knock performance: Refers to the ability of gasoline to resist detonation combustion under various operating conditions. The anti-knock performance of automotive gasoline is expressed by the octane number. The higher the octane number, the better the anti-knock performance. The anti-knock capability of gasoline is related to its chemical composition. 3. Stability: Refers to the stability of gasoline when stored for a long time under natural conditions. It is characterized by gum content, induction period, and iodine value. The lower the gum content, the better; the longer the induction period, the better. National standards stipulate that the actual gum content per 100 milliliters of gasoline must not exceed 5 milligrams. The iodine value indicates the content of olefins.
12
2
Share

Why is my car's fuel consumption getting higher and higher?

The reasons for increasing car fuel consumption are as follows: Dirty engine oil: When engine oil becomes dirty, it leads to poor lubrication, increasing resistance in various moving parts of the engine. More energy is required to overcome this resistance, resulting in higher fuel consumption. Dirty air filter: A dirty air filter causes poor air intake. Firstly, more energy is consumed during air intake. Secondly, insufficient air intake leads to incomplete combustion, where some gasoline isn't fully burned and gets expelled. Naturally, more gasoline is required to travel the same distance. Spark plugs reaching end of life: Spark plugs are often overlooked, with some people not replacing them even after 100,000 kilometers. Although spark plugs can still function after their lifespan, insufficient ignition energy causes delayed ignition, missing the optimal ignition timing. This also leads to incomplete combustion, further increasing fuel consumption. Excessive carbon buildup in the vehicle: Carbon deposits typically accumulate in the throttle body, fuel injectors, intake manifold, and piston tops. Excessive carbon buildup in any of these areas will cause incomplete combustion, thereby increasing fuel consumption.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.