What are the reasons for a 4S shop to recommend replacing a car door?

1 Answers
McIan
07/30/25 5:25am
4S shop recommends replacing car doors for the following reasons: Dented car door: If the car door has minor scratches or dents, it can be repaired and there is no need to replace the door. However, if the damage to the door is severe, deformed, or covers a large area, replacement is necessary. Installing a new car door would be more reassuring. Safety aspects: The car door provides access for drivers and passengers to enter and exit the vehicle, isolates external interference, and to some extent mitigates side impacts to protect the occupants. The aesthetics of the car are also related to the design of the door. The quality of a car door is mainly reflected in its anti-collision performance, sealing performance, and ease of opening and closing, among other functional indicators. Anti-collision performance is particularly important because during a side collision, the buffer distance is very short, making it easy for the occupants inside the vehicle to be injured.
Was this review help?
9
1
Share
More Forum Discussions

How is the Subaru Forester?

Here are the detailed specifications of the Subaru Forester: 1. Body Dimensions: The Forester is a compact SUV under the Subaru brand, with a length of 4640mm, width of 1815mm, height of 1730mm, and a wheelbase of 2670mm. 2. Powertrain Configuration: The Forester is equipped with a 2.0-liter four-cylinder naturally aspirated horizontally opposed engine across all trims. This engine delivers a maximum power of 113kW and a peak torque of 196 Nm. The maximum power is achieved at 5800-6000 rpm, while the maximum torque is available at 4000 rpm. 3. Suspension Setup: The Forester features a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear. The double-wishbone suspension is a structurally complex independent suspension system, consisting of left and right wishbones.
11
4
Share

What type of gasoline should a Mercedes-Benz A200 use?

Mercedes-Benz A200 should use 97 or 95 octane gasoline. Here is some relevant information about the Mercedes-Benz A200: Power: The new domestically produced Mercedes-Benz A200 is equipped with a brand-new 1.3T turbocharged engine, delivering a maximum output of 136 horsepower. It is paired with a new seven-speed dual-clutch transmission. In addition to its impressive performance, the new domestically produced Mercedes-Benz A200 also features an extended wheelbase. Interior: Inside the new Mercedes-Benz A200, the most striking features are the large central display and the futuristic interior design, which can be described as quite stylish. It holds its own against higher-tier models like the Mercedes-Benz C-Class and E-Class. In terms of interior aesthetics, the new Mercedes-Benz A-Class is on par with competitors such as the Audi A3 and BMW 1 Series sedan.
11
2
Share

What are the differences between Mercedes-Maybach and S-Class?

The following are the specific differences between the Mercedes-Benz S-Class and the Maybach S-Class: 1. Body length: The dimensions of the Mercedes-Benz S-Class 450L are 5259*1899*1497mm, while the Maybach S-Class 450L measures 5466*1899*1500mm. The Maybach S-Class appears longer than the Mercedes-Benz S-Class, with the rear triangular small window of the Mercedes-Benz S-Class located on the door, whereas the Maybach S-Class has its rear triangular small window on the C-pillar. 2. Power: Taking the Mercedes-Benz S450L and Maybach S450L as examples, although both models are equipped with a 3.0T L6 engine, the Mercedes-Benz S450L features a single-turbo engine, while the Maybach S450L comes with a twin-turbo engine. 3. Interior: The Maybach S450L also adds features compared to the Mercedes-Benz S450L, such as variable steering ratio, active grille shutters, rear multimedia controls, full-car soundproof glass, privacy glass, heated air vents, and a PM2.5 air filter.
16
1
Share

What Causes the Dashboard Lights to Illuminate but the Car Fails to Start?

Dashboard lights illuminating but the car failing to start is typically caused by insufficient battery charge. Below are some maintenance tips for your car battery: 1. In-car power usage: To preserve your car battery, avoid activities like listening to the radio at high volume, charging your phone, or using an air pump while the engine is off. Prolonged use of these devices can drain the battery, and frequent depletion significantly reduces its lifespan. 2. Highway or long-distance driving: Regularly driving on highways offers multiple benefits, not only clearing carbon deposits from the engine but also fully charging the battery. Generally, driving on the highway for over an hour can fully charge the battery, keeping it in optimal condition. 3. Avoid prolonged inactivity: If the car is left unused for an extended period, disconnect the battery cables or start the vehicle every two weeks and drive several dozen kilometers to ensure the battery remains functional. 4. High-power device connections: Many modern car accessories, such as car refrigerators, vacuum cleaners, and air pumps, have high instantaneous power demands. Avoid powering these devices directly from the car battery. Instead, start the vehicle first and then connect the electrical devices.
4
1
Share

What brand engine is the BJ40 equipped with?

The BJ40 is equipped with a 2.4L inline-four naturally aspirated engine with the code name G4CA, which is an improvement over the 2.7L engine previously used in the BAW Warrior. It offers two power options: 2.0T and 2.3T, capable of delivering maximum torque outputs of 320N·m and 350N·m, respectively. More details are as follows: 1. Exterior design: The Beijing Auto BJ40, with its rugged SUV style, features numerous right-angle designs, exuding a strong masculine appeal. Interior design: As an off-road vehicle, it does not boast luxurious decorations but adopts a simple and rugged design style reminiscent of the "Wrangler." The window and central locking switches are designed as toggle levers, giving a very retro feel. 2. Powertrain: The BJ40 is powered by a 2.4L naturally aspirated engine, delivering a maximum power of 105kW and a maximum torque of 217Nm, paired with a 5-speed manual transmission. The new vehicle also features a mechanical part-time four-wheel-drive system and employs a body-on-frame structure. Additionally, the Beijing Jeep BJ40's rear suspension is a five-link non-independent setup, providing better support for extreme off-road conditions.
20
3
Share

Is It Normal for the Engine to Shake When Turning on the AC in a New Car?

It is a normal phenomenon. When the car is in an idle state, the engine continues to run, and shaking when the AC is turned on is quite normal. Idling is a working condition of the car, referring to the engine running in neutral gear. The engine speed during idling is called the idle speed. The idle speed can be adjusted by modifying the throttle opening size, among other methods. Below is additional information about idling: Normal Idling: When the vehicle is parked and the engine is started, the minimum stable engine speed is referred to as parking idle (the process of transitioning from a cold engine idle state to an idle state where the engine reaches normal operating temperature is called warming up or heating the engine). Driving Idle: When the car is in gear, without pressing the accelerator pedal or releasing it while driving, maintaining the minimum throttle opening, the engine speed matches the parking idle speed. This state is called driving idle.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.