What are the pros and cons of the auto start-stop function in cars?

1 Answers
VanessaMarie
07/29/25 5:02pm
Regarding the pros and cons of the auto start-stop function in cars, they are as follows: 1. Advantages: Fuel saving; Whether waiting at a red light or in traffic, the auto start-stop technology can automatically turn off the engine when the car is stationary, thereby saving fuel. 2. Disadvantages: Increased vehicle costs; Cars equipped with an auto start-stop system cost several thousand dollars more than those without. Additionally, due to the frequent starting and stopping of the engine, there is a higher demand for oil quality, further increasing maintenance costs. Extended information: The auto start-stop system refers to a complete control system that automatically shuts off the engine during short stops and restarts the car when needed, aiming to avoid engine idling during stops and save fuel.
Was this review help?
17
4
Share
More Forum Discussions

BMW X5: Should I Buy the 2.0T or 3.0T?

Here are the differences between the BMW X5 2.0T and 3.0T: 1. Power: The 2.0T model of the BMW X5 is equipped with a turbocharged engine, with a maximum power output of 265 horsepower and a peak torque of 400 Nm. The 3.0T model, on the other hand, features a turbocharged engine with a maximum power output of 340 horsepower and a peak torque of 450 Nm. 2. Configuration: The 2.0T model comes with a cruise control system, while the 3.0T model is equipped with an ACC adaptive cruise control system. 3. Price: The 3.0T model of the BMW X5 has higher configurations compared to the 2.0T model, making it more expensive.
2
1
Share

How to Reset the Driver's Window on a Mazda 6?

To reset the driver's window on a Mazda 6, first turn on the vehicle's ignition switch. Press the driver's window lift switch to lower the window completely, then raise it to the top. Hold the switch for three seconds before releasing it. The reset method for other windows is the same. Below is some relevant information about car windows: 1. Power windows, which use a motor to drive the glass up and down, replace traditional crank-operated windows. Each door is equipped with a button for the window lift switch, making the window operation more convenient and comfortable. 2. Automatic lift function, which is the most basic feature of power windows. Simply press the switch, and the window will continue to rise or fall until it hits the limit switch. 3. External window control function, where inserting and turning the door key from outside the vehicle can lower the window. 4. Lastly, the power reserve function, which is only available on some vehicles, provides about one minute of continued power to the window circuit after the vehicle is turned off.
13
4
Share

What is the most effective way to remove formaldehyde from a new car?

New cars can quickly remove formaldehyde through the following three methods. Here are the methods for removing formaldehyde from a new car: 1. Pay attention to ventilation: The plastic packaging inside the car should be removed as soon as possible so that harmful gases can be released quickly. When driving, open the windows more often to allow air circulation, which will also help remove odors from the car. 2. Adsorption method: Use activated charcoal or Ye Guangni for adsorption. It is important to note that activated charcoal tends to become saturated, so it needs to be replaced after a period of use. Otherwise, the absorbed substances may be released again. In contrast, Ye Guangni not only adsorbs but also decomposes the absorbed harmful substances. It does not require sun exposure and does not become saturated, making it a better choice. 3. Air fresheners: Be careful not to buy only masking sprays. Instead, opt for air purifiers like Guang Lusu, which not only mask odors but also decompose formaldehyde. Only those that can decompose formaldehyde are effective.
10
0
Share

Which car brand is maxus?

maxus refers to SAIC Maxus, a wholly-owned subsidiary of Shanghai Automotive Industry Corporation (SAIC). The brand offers MPV and SUV models, with SUV models including the D60 and D90. Below are relevant details: 1. The D90 is a mid-to-large SUV equipped with a 2.0-liter turbocharged engine. This engine delivers 218 horsepower and a maximum torque of 350 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 6AT transmission. The D90 utilizes a double-wishbone independent front suspension and a five-link solid axle non-independent rear suspension. 2. The D60 is powered by two engine options: a 1.3-liter turbocharged engine and a 1.5-liter turbocharged engine. The 1.3-liter turbocharged engine produces 163 horsepower and a maximum torque of 230 Nm, featuring multi-point fuel injection technology and an aluminum alloy cylinder head and block. The 1.5-liter turbocharged engine generates 169 horsepower and a maximum torque of 250 Nm, featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
9
4
Share

How to Check the Oil Level Normally on Wuling Rongguang?

Wuling Rongguang's oil dipstick has clear upper and lower limit marks. When adding engine oil, ensure the oil level is between these two marks for normal operation. In automobiles, the dipstick is a commonly used tool to check the remaining quantity of lubricating oil in the oil hole. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform when inserted and rebound when pulled out. The method for checking the oil level on Wuling Rongguang's dipstick in a stationary state is as follows: 1. After leaving the car overnight or stopping for half an hour, accurately observe the oil level on the dipstick, checking both the front and back sides. 2. Under normal circumstances, check the dipstick once or twice a day. 3. In abnormal situations, such as reduced engine sealing performance, increased oil consumption, or internal/external leaks that have not been addressed. 4. After any malfunction occurs, especially internal damage, promptly check the dipstick. 5. When checking the dipstick, pay attention not only to the quantity but also to any changes in the oil's quality.
11
2
Share

How Often Should the Coolant in Volkswagen Lavida Be Replaced?

The coolant in Volkswagen Lavida generally needs to be replaced every 2 years or 40,000 kilometers. However, this is only a reference interval. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Pay attention to the condition of the coolant. If the coolant is insufficient, replenish it promptly. If suspended particles, sediment, or signs of deterioration or discoloration are found in the coolant, replace it immediately and clean the system. Methods to determine if the coolant is low: Observe the coolant warning light on the dashboard. If it lights up, it is likely due to low coolant, though it could also be caused by excessively high engine temperature. Check the water level marks on the coolant reservoir. The normal coolant level should be between the maximum and minimum marks. Whether the coolant is low depends on these marks. If the coolant is below the minimum level, it indicates a shortage. Inspect the coolant tank. If the level is below the minimum mark (MIN), do not continue driving and add coolant promptly.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.