What are the pros and cons of retrofitting a 360-degree panoramic view system?

1 Answers
LeJeffrey
07/25/25 8:32am
The advantages of retrofitting a 360-degree panoramic view system are: it can enhance control over the vehicle's posture during parking or driving on narrow roads, thereby improving driving safety. The disadvantages are: 1. Since the 360-degree panoramic view system requires two cameras to be installed under the side mirrors, it necessitates drilling two mounting holes in the mirrors; 2. Installing a 360-degree panoramic view system involves removing a large number of vehicle components, such as side mirrors, door panels, center console panels, and in some cases, even the doors; 3. If the product quality is substandard or the wiring is improperly arranged, it can easily pose safety hazards, including the risk of spontaneous combustion; 4. If the installed 360-degree panoramic view system is of poor quality, with serious issues like image quality and distortion, it may lead to misjudgment of the vehicle's posture by the driver, potentially causing accidents.
Was this review help?
5
0
Share
More Forum Discussions

What tires does the Lexus UX use?

The Lexus UX comes with two original tire specifications: 215/60R17 and 225/50R18, equipped with Michelin PRIMACY4 tires that emphasize braking performance. Michelin was established in 1889 in Clermont-Ferrand, France. MICHELIN is the English name of Michelin, and Michelin tires are a French brand. The company now operates across five continents with R&D centers in Europe, North America, and Asia. Michelin is one of the world's top three tire manufacturers. For daily use of Lexus UX tires, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. As tires wear from driving, the tread grooves gradually become shallower. If the tread wears out completely, the tire will lose its ability to drain water and provide traction, significantly reducing the vehicle's performance. Small cracks can also be a hidden danger for blowouts at high speeds. Additionally, promptly remove pebbles from the grooves; try to park on flat surfaces. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this can accelerate tire wear; do not splash water to cool down. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber; avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.
6
4
Share

How to Learn Reverse Parking?

Many beginners don't know how to reverse park, which often leads to failure during the reverse parking test. Here are the specific methods for reverse parking: 1. Clutch Control: It's essential to control the clutch properly during reverse parking. Gently lift your foot until the car starts moving, then keep your foot steady. Practice driving in the parking area frequently to maintain a stable clutch speed without sudden fluctuations. For beginners, slower is generally better. Mastering clutch control is almost half the battle won. 2. Fixed-point Parking: When initially driving into the reverse parking position, ensure the front of the car stops before the yellow line, but the wheels must not cross it. Practice finding your own reference point. When parking, you can look ahead or tilt your head slightly to check the distance from the yellow line. The ideal parking distance on the left side is about 1.5 meters. 3. Right Reverse: When reversing to the right, turn the steering wheel fully to the right once the left rearview mirror can no longer see the front yellow line. Continuously monitor the right rearview mirror. When the distance between the car body and the garage's yellow line is about three centimeters (roughly two or three fingers' width), immediately straighten the steering wheel and slowly reverse in, paying attention to both sides. If not aligned perfectly, you can make minor adjustments to both sides to successfully park. Then, continue reversing while checking the left rearview mirror for fixed-point parking, finding your own reference point. 4. Left Exit and Entry: Drive straight out from the garage to the left. As soon as the rear wheels exit, turn the steering wheel fully to the left. Once the entire car body is out, return the steering wheel halfway to position the car at a 45-degree angle and stop. Next, check the left rearview mirror to reverse into the left garage, then exit to the right.
17
0
Share

What is the 0-100 km/h acceleration time of the Tesla Model 3?

According to official data, the Tesla Model 3's 0-100 km/h acceleration time is 6.1 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in naturally faster acceleration. The Tesla Model S has a maximum torque of 404 Nm, with a 0-100 km/h acceleration time of 3.2 seconds; the Tesla Model 3 has a maximum torque of 340 Nm, with a 0-100 km/h acceleration time of 6.1 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Tesla Model 3's transmission is a fixed gear ratio transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Tesla Model S has a power-to-weight ratio of 324 Hp/T, with a 0-100 km/h acceleration time of 3.2 seconds; the Tesla Model 3 has a power-to-weight ratio of 150 Hp/T, with a 0-100 km/h acceleration time of 6.1 seconds.
12
0
Share

What Causes a Car Air Conditioning Compressor to Fail?

Car air conditioning compressor failure is primarily caused by operation under idle conditions. Here are the relevant details: 1. Definition of Compressor: The compressor serves as the heart of a car's air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. Compressors are categorized into fixed displacement and variable displacement types. Based on working principles, they can be further divided into fixed displacement compressors and variable displacement compressors. 2. Working Principle of Compressor: The compressor operates by automatically adjusting power output according to preset temperatures. The air conditioning control system doesn't collect temperature signals from the evaporator outlet, but rather controls the compressor based on pressure change signals within the air conditioning pipeline.
16
4
Share

How to Turn Off the Rear Windshield Wiper?

The method to turn off the rear windshield wiper: Simply push the wiper forward once. Wipers are tools installed on motor vehicle windows to provide basic cleaning, preventing rainwater and other debris from obstructing visibility. The key to the wiper's effective operation lies in the rubber wiper blade maintaining sufficient moisture. Only with adequate moisture can it retain excellent flexibility, ensuring tight contact with the windshield. The wiper control system achieves delay control of the wiper through an electronic control system, which includes a dual-speed motor and a limit switch. The following functions can be achieved via the handle switch: washing, wiping, high-speed wiping, low-speed wiping, intermittent wiping, and delay control.
1
4
Share

Will water in the car chassis drain out by itself?

Water in the car chassis will not drain out by itself. Here are the relevant details: 1. Precautions: When cleaning water from the chassis, it is important to pay attention to rust prevention, as accumulated water is most likely to cause rust. 2. Chassis: The chassis refers to the combination of the transmission system, running system, steering system, and braking system in a car. It installs the car engine and its various components and assemblies, forming the overall shape of the car, bearing the engine power, and ensuring normal driving. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the engine's power to make the car move and ensuring normal driving.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.