What are the pros and cons of installing exhaust tips on cars?

1 Answers
AxelLynn
07/30/25 2:34am
No significant drawbacks have been found with car exhaust tips, and they have no adverse effects on vehicles. In addition to preventing deformation of the exhaust pipe, car exhaust tips also provide turbocharging and spoiler effects, and can reduce the noise emitted from the exhaust pipe to some extent. Related information about car exhaust tips: 1. Fire safety: There are exhaust tips specifically designed for fire safety, such as those used on tanker trucks and certain special vehicles. 2. Purely aesthetic purpose: Many chrome-plated exhaust tips are fixed to the original iron exhaust ports to enhance appearance. 3. Sports modification: This type mainly increases the exhaust sound, producing a roar similar to that of a sports car as the exhaust passes through the tip, but it does not actually improve engine performance.
Was this review help?
19
4
Share
More Forum Discussions

Brief Steps for Replacing a Fuel Filter

Fuel filter replacement steps are as follows: 1. Park the vehicle on a solid, level surface. 2. Depressurize the fuel system (loosen the valve cap to release fuel system pressure). 3. Start the engine and let it run until the fuel in the lines is depleted and the engine stops. 4. The fuel filter is typically located beneath the engine or fuel tank. If necessary, use a jack to lift the vehicle and disconnect the fuel lines from the fuel filter. 5. Remove the mounting bolts of the fuel filter, then detach the old fuel filter. 6. Compare the new fuel filter with the removed one to ensure they are the same model. After confirmation, install the new fuel filter, paying attention to its orientation to ensure it points toward the engine. Secure it with the mounting bolts once properly aligned. 7. Reconnect the fuel lines and install the fuel pump fuse. 8. Reconnect the battery, then lower the vehicle to complete the process.
18
2
Share

At what tire pressure will a tire burst?

An automotive tire pressure of 280 kPa will not cause a tire to burst. Generally, car tires only burst when the pressure exceeds 420 kPa or even higher, as manufacturers typically leave a 30% safety margin in their recommended tire pressure specifications. The maximum pressure a tire can withstand ranges between 350-420 kPa. Even when inflating tires excessively during summer conditions, it's extremely difficult to reach the tire's pressure limit. Therefore, tires are not as prone to bursting under high-pressure conditions as one might assume. Below is relevant information: 1. A tire pressure of 280 kPa can cause abnormal tire wear, with the center of the tread wearing more severely than the shoulder areas, which shortens the tire's service life. It also reduces the tire's friction and grip, extending braking distances. 2. The tire becomes harder, compromising ride comfort and increasing vehicle vibration, which indirectly affects the lifespan of suspension components and other parts.
5
3
Share

What Are the Reasons for No Sound in Car Music Playback?

Car suddenly having no sound could be due to a dead battery, or issues with the fuse box and wiring. Importance of Audio System: Car audio is a crucial way for drivers to combat fatigue during journeys, playing a vital role in safe driving and overall vehicle safety. Therefore, it should never be neglected. Checking the Audio System: Determine if the car's audio system has been modified. If so, check the modified fuse or see if the audio output cable has come loose. If the issue persists, consider whether the speakers might be faulty. However, car audio systems are generally designed to alleviate the monotony of travel for drivers and passengers, featuring high standards in sound quality, operation, and vibration resistance to ensure stable performance and perfect sound quality.
2
4
Share

What items are included in the physical examination for a driver's license?

The main items for the driver's license physical examination are as follows: 1. Age: 18-70 years old; 2. Height: No restriction; 3. Vision: Naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart (equivalent to 0.8 on the E-chart); 4. Color discrimination: No red-green color blindness; 5. Hearing: Ability to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork; 6. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement function; 7. Lower limbs: Normal movement function, with a length difference between the lower limbs not exceeding 5 cm; 8. Trunk and neck: No movement dysfunction.
7
4
Share

Where is the production location of Liechi tires?

Liechi tires are produced in Jinshui District, Zhengzhou City, Henan Province. Functions of tires: Mainly include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load-bearing capacity, handling performance, average wear, and mileage. Tire cross-sectional structure: Can be roughly divided into 4 parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead contacts the wheel rim to provide sealing. Tire internal composition: The tire interior is composed of multiple layers of different materials, including tread pattern, overlay, steel belt layer, stress-absorbing rubber strip, carcass ply layer, and inner liner.
11
2
Share

How to Identify Spark Plug Materials?

Spark plug materials can be identified by the central electrode core. A thicker core indicates a standard type, while a thinner white-colored core signifies platinum, and a thinner yellow-colored core indicates iridium. Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables, but over the past decade, most car engines have been updated to feature direct connections between ignition coils and spark plugs. Working principle of spark plugs: The ground electrode of a spark plug connects to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and central electrode, it ionizes the medium between the central electrode and ground electrode to generate a spark, thereby igniting the air-fuel mixture in the cylinder.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.