What are the pros and cons of installing a supercapacitor in a car?

1 Answers
FernandoLee
07/29/25 11:36am
Installing a supercapacitor in a car has the following pros and cons: Benefits of installing a supercapacitor in a car: After installation, the capacitor can extend the battery's lifespan. The battery is a wearable component in a car. When the engine is not started, the battery powers the electronic devices inside the car, and it is also responsible for starting the engine. Drawbacks of installing a supercapacitor in a car: The downside of installing a capacitor is that it may burn out, which poses certain safety hazards. It is recommended that car enthusiasts avoid arbitrarily installing additional components in their vehicles. Doing so may create safety hazards, thereby threatening personal safety.
Was this review help?
15
0
Share
More Forum Discussions

What brand is the smart car?

Smart is the creative collaboration product between Mercedes-Benz and the world-renowned watch industry giant Swatch. More details about Smart are as follows: 1. In terms of interior, the Smart fortwo sharpred primarily features a black theme, with red stitching on the seats and dashboard. The detailed accents further enhance the vehicle's premium feel, making it more elegant. 2. The Smart Sharpread offers two model options: Coupe and Cabrio, catering to different preferences.
5
1
Share

What to Do When the Volkswagen Tiguan's Electronic Parking Brake Won't Release?

Reasons and solutions for the Volkswagen Tiguan's electronic parking brake not releasing are as follows: 1. Issues with the electronic parking brake system. Solution: First, use a diagnostic computer to check for error codes. If there are any, note them down. If there are none, disconnect the battery cables and let the system sit for about 5-10 minutes before reconnecting and testing again. If there's still no effect, the brake actuator might be faulty. 2. Parking immediately after washing the car in winter, causing the brake disc, brake pads, and calipers to freeze together. Solution: Pour boiling water over them to thaw. The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction between the brake disc and pads to control parking braking, except that the control method has changed from a mechanical handbrake lever to an electronic button.
20
0
Share

What is the fuel tank capacity of the Polo?

The fuel tank capacity of the Volkswagen Polo is 42.5L, which is the officially announced data. Owners who have purchased the Volkswagen Polo can also check this information on the vehicle's configuration sheet. The Volkswagen Polo uses 92-octane gasoline, with a fuel consumption of 5.5L per 100 kilometers. A full tank of fuel can cover a distance of 772km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is the volume from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
5
4
Share

How to Spray Windshield Washer Fluid on Geely Emgrand?

The method to spray windshield washer fluid on Geely Emgrand is as follows: 1. The windshield washer fluid switch of Geely Emgrand is located on the right-hand side of the steering wheel, which is also the wiper control lever. The spraying operation is very simple—just pull the lever towards yourself to spray the fluid. 2. If no fluid is sprayed after pulling the lever, do not continuously pull it. It might be that the windshield washer fluid is used up. In this case, check and refill the fluid before operating again. Prolonged pulling of the lever without fluid can cause the motor to overheat. Reasons why the car does not spray windshield washer fluid: 1. The nozzle is clogged with dust. In this case, simply use a fine needle to clear the nozzle. 2. The fuse is blown, and the motor does not respond or work. Check the corresponding fuse and replace it if it is blown. 3. Frequently using tap water or homemade unqualified washer fluid to clean the windshield can cause internal pipes to be clogged with scale.
11
4
Share

What Causes the Bad Smell in the Junpai D60 Air Conditioning?

Here are the reasons why the Junpai D60 air conditioning produces a bad smell: 1. Long-term use of the air conditioning can cause dust to accumulate on the indoor filter and copper fins. When the dust reaches a certain level, it produces an odor, which is then dispersed into the air when the air conditioning is turned on. 2. After cooling or heating, the indoor unit of the air conditioning often generates moisture. If the air conditioning is turned off immediately without a drying or anti-mold function, the moisture remains inside, leading to mold growth over time, which produces a musty smell. Here are methods to eliminate the bad smell: 1. If the air conditioning has been used for a short time and only has dust on the panel and vents, simply wipe it clean, open the panel, remove the filter, and rinse it with water. 2. If the air conditioning has been used for a long time and the user cannot perform a simple cleaning, contact the after-sales service for a thorough cleaning to ensure healthier and fresher air output.
4
1
Share

How to Remove the Spare Tire of Wuling Rongguang?

Open the rear door of the vehicle, and you will find a screw on the right side of the bumper. Use the tire removal socket from the vehicle's tool kit (left to loosen, right to tighten) to remove the spare tire. Below are some precautions for using the spare tire: 1. Regularly inspect the spare tire: The inspection mainly involves checking the tire pressure, wear, and cracks. Replace the tire as soon as possible once the tread wears down to the wear indicator line. If there are fine cracks on the tire sidewall, avoid using it for long-distance or high-speed driving, as the sidewall is thinner and prone to blowouts at high speeds. 2. Keep oil products away from the spare tire: The main component of tires is rubber, which is highly susceptible to erosion by various oil products. Many car owners store lubricants and other oil products in the trunk. If these oils come into contact with the tire, they can cause swelling and corrosion, significantly reducing the tire's lifespan. If the tire gets contaminated with oil, promptly wash it off with a neutral detergent. 3. Spare tire lifespan is about 4 years: Tires are rubber products, and prolonged storage can lead to aging. Generally, the aging period for tires is about 4 years, so the spare tire should be replaced after this period.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.