What are the pros and cons of car color change films?

1 Answers
LeMadeline
07/29/25 9:30pm
The advantages and disadvantages of car color change films are as follows: 1. Advantages: Car color change films can isolate the contact between the car paint and the air, preventing oxidation and damage to the paint, and can also extend the lifespan of the original factory paint. The color change film is made of high-molecular environmentally friendly materials, which do not have side effects on the car's paint and can be replaced at any time. It also helps to preserve the original paint color and gloss, slowing down aging. 2. Disadvantages: If the film is accidentally scratched by stones, the entire film will be ruined, and after three or four years, the film itself may turn yellow or change color. Changing the color with a film requires registration, which can be troublesome. Low-quality color change films are difficult to remove and can leave a lot of adhesive residue on the car.
Was this review help?
20
2
Share
More Forum Discussions

Is Gear Oil the Same as Engine Oil?

Gear oil is not engine oil. Gear oil, also known as transmission oil, is used in automotive transmissions. It is primarily composed of petroleum lubricants, base oils, or synthetic lubricants, combined with extreme pressure anti-wear agents and oiliness agents to form a type of transmission lubricant. It is used to lubricate various gears in transmissions, reducers, and differentials to prevent gear surface wear, scratches, and sintering, thereby extending service life and improving power transmission efficiency. Engine oil, on the other hand, is used in automotive engines and is a type of engine lubricant composed of base oils and additives. Depending on the base oil, it can be classified into semi-synthetic oil, fully synthetic oil, and mineral oil. Inside the engine, oil serves functions such as cleaning, lubricating, and cooling components. It operates in high-temperature and high-pressure environments for extended periods, requiring high oxidation resistance and stronger shear resistance.
18
5
Share

How early can a vehicle inspection be scheduled?

You can schedule a vehicle inspection up to 3 months in advance. The timing for vehicle annual inspections is not based on specific dates but rather calculated by month. If the vehicle owner has time within the three months prior to the inspection deadline, they can proceed with the inspection early, allowing for better scheduling flexibility. If a vehicle continues to be driven on the road without undergoing the required inspection on time, it may result in fines, penalty points, and temporary impoundment of the vehicle. Additionally, if the inspection is overdue, any previously purchased car insurance will not be valid. Therefore, it is crucial not to overlook vehicle inspections and to ensure they are conducted promptly to maintain the vehicle's legal roadworthiness.
16
2
Share

How to Deal with Heavy Engine Exhaust?

Methods to address heavy engine exhaust: 1. If black smoke is observed, it indicates incomplete combustion of the air-fuel mixture. Check if the high-voltage ignition wires have excessive resistance and inspect the spark intensity, which should normally appear white or white-blue. Also, examine whether the fuel injectors are dripping. 2. If blue smoke is emitted from the exhaust pipe, it signifies oil burning. In this case, the cylinder cut-off test can be used for diagnosis. Typically, this issue arises from excessive clearance between the piston rings and cylinder or aging/damaged valve stem seals. 3. The fuel cut-off method can be employed by disconnecting each fuel injector connector one by one, then observing and smelling the exhaust pipe to see if the odor or black smoke disappears. If changes occur, it indicates a fault in that particular cylinder. Additionally, check if the air filter is excessively dirty or clogged. 4. Heavy exhaust can also result from individual cylinders not firing in the ignition system, causing unburned air-fuel mixture to be directly expelled. The gasoline vapor then recondenses into white smoke, leading to heavy exhaust emissions.
11
3
Share

Is the Sorento an imported model?

The Sorento is an imported model. The Sorento is a mid-size SUV produced by Kia. In terms of exterior design, the Sorento adopts Kia's new design language, with clean and uncomplicated overall lines, giving the vehicle a substantial appearance. For the interior, the Sorento primarily features an all-black design, with most areas wrapped in genuine leather, and the three-spoke steering wheel enhances its sporty feel. Other features of the Sorento include: 1. Body dimensions: The Sorento measures 4800mm in length, 1890mm in width, and 1720mm in height; 2. Powertrain: The Sorento is equipped with a 2.0-liter turbocharged engine and a 2.4-liter naturally aspirated engine. The 2.0-liter turbocharged engine delivers a maximum horsepower of 185 hp, while the 2.4-liter naturally aspirated engine produces a maximum horsepower of 188 hp; 3. Transmission: The Sorento comes standard with a 6-speed automatic transmission.
8
2
Share

What is the 0-100 km/h acceleration time of the Mazda3 Axela?

0-100 km/h acceleration time of the Mazda3 Axela: 1. The 1.5L manual transmission model has a 0-100 km/h acceleration time of 11.97 seconds; 2. The 1.5L automatic transmission model has a 0-100 km/h acceleration time of approximately 12.02 seconds; 3. The 2.0L automatic transmission model has a 0-100 km/h acceleration time of approximately 9.23 seconds. The Mazda3 Axela is a compact sedan under the Mazda brand, equipped with two engine options: 1.5L and 2.0L. The Mazda3 Axela features a sporty design, with body dimensions of 4582mm in length, 1795mm in width, and 1458mm in height, and a wheelbase of 2700mm. It comes with features such as engine start-stop, seat adjustment, central armrest, power windows, and is equipped with a front-wheel drive 6-speed automatic manual transmission.
19
0
Share

Where is the air conditioning filter located in the Familia?

The air conditioning filter in the Familia is located behind the glove box on the passenger side. If you want to replace the air conditioning filter, you need to remove the glove box on the passenger side, as this is the only way to access and replace it. The air conditioning filter is a wear part that needs to be replaced regularly. If it is not replaced for a long time, it will affect the health of the passengers in the car and the normal operation of the air conditioning system. The Familia is a model produced by Haima Automobile, featuring a balanced and practical design with a stylish appearance. The body lines are finely crafted with elegant curves, in line with Mazda's consistent harmonious design philosophy. The dynamic design is infused with an elegant temperament, and the overall body lines start from the pentagonal shape at the center of the front grille, extending from the front to the sides and from the bottom to the top, giving the entire body a good streamlined shape.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.