What are the procedures required for the transfer of a sedan car?

1 Answers
LaReagan
07/29/25 11:13am
The procedures required for the transfer of a sedan car include: 1. Original ID cards of both the buyer and seller, household registration booklet, and temporary residence permit for non-local residents (the buyer's temporary residence permit must be valid for at least one year); 2. Vehicle license; 3. Vehicle registration certificate; 4. Supplementary vehicle registration form; 5. Vehicle purchase tax certificate. Points to note during vehicle transfer: 1. Ensure the car documents match the owner and the vehicle itself; 2. Transaction and transfer fees are to be negotiated and decided by both parties; 3. Confirm that any mortgage or loan issues have been resolved. Vehicle transfer registration must be completed at the local vehicle management office where the vehicle is registered.
Was this review help?
14
0
Share
More Forum Discussions

How Many Kilometers Should You Change Engine Oil?

Engine oil should be changed between 5,000 to 10,000 kilometers. Engine oil, also known as lubricating oil, is the lifeblood of a car. Inside the engine, there are many metal surfaces that rub against each other. These components move at high speeds in harsh environments, with working temperatures reaching 400 to 600 degrees Celsius. Under such extreme conditions, lubricating oil reduces wear on engine parts and extends their service life. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, providing certain new characteristics, making them an essential part of lubricating oil.
4
2
Share

What are the dimensions of the Leapmotor S01?

Reasons for the engine warning light on the car dashboard: poor combustion state; engine knocking; poor fuel quality; unclean engine cylinder interior with accumulated carbon deposits; inability of the computer to obtain engine data. First, check the coolant temperature gauge and oil pressure warning light. If the coolant temperature gauge and oil pressure warning light are not on, the car can still be started, but it is important to control the speed and drive to the repair station for inspection as soon as possible. Solutions for the engine warning light on the car dashboard: inspect the vehicle, listen for any abnormal engine noises, check if the exhaust is black or blue. If the situation is severe, do not continue driving recklessly. Contact the 4S store for a tow truck and complete the inspection as soon as possible. It is recommended that the owner visit a professional car 4S store and have a professional technician diagnose and analyze the cause.
18
0
Share

What is the reason for an exclamation mark appearing on the steering wheel?

The reasons for an exclamation mark appearing on the steering wheel: 1. Generator failure, unstable power supply can cause the steering wheel light to illuminate; 2. Loose connection in the power steering system, leading to leakage of some steering fluid; 3. Power steering pump failure; damage to the power steering pump can also cause the steering wheel light to illuminate; 4. Air in the steering system, causing abnormal steering; 5. Mechanical damage to the steering gear piston cylinder, decreased sealing performance of the oil seal, damage to the control valve; 6. Foreign objects in the steering hydraulic pipeline, causing the steering pump flow control valve to stick. Solutions for an exclamation mark appearing on the steering wheel: 1. Check the generator, power steering pump, steering gear, and other components to see if they are damaged; 2. Inspect the connection points of various components for any looseness; 3. Check whether the tire pressure is at the normal level; 4. Replace the power steering pump, steering gear, and other parts.
6
4
Share

What to Do When the Engine Won't Start?

Solutions for engine failure to start: 1. Jump-start: Connect the positive and negative terminals of the two car batteries, turn off all electrical devices in the car, start the dead vehicle and gently press the accelerator pedal, then turn off the ignition switches of both cars and remove the cables; 2. Push-start: Utilize a downhill slope, turn on the ignition switch before pushing the vehicle, shift the transmission into 2nd gear when reaching speed, quickly release the clutch pedal and accelerate, pressing the throttle during startup to increase the throttle opening for easier ignition. An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, and electric motors.
20
4
Share

How to Remove and Install the Taillights of the Mazda3 Axela?

The method for removing and installing the taillights of the Mazda3 Axela: 1. After opening the trunk, first remove the inner lining fabric on one side of the taillight. Use a flathead screwdriver to pry open these clips; 2. There are three nuts securing the taillight. Take out a small ratchet with an 8mm socket and remove the three nuts one by one, keeping them safe; 3. Disconnect the taillight wiring harness. The taillight harness has only one plug. Simply pull out the plug by hand. If it's difficult to remove, gently pry it with a small flathead screwdriver; 4. Replace the new bulb. Hold both sides of the taillight with both hands and gently pull outward while slightly shaking it. Be careful not to use excessive force, and the taillight can be easily removed and installed. The Mazda3 Axela is a car produced by Changan Mazda, featuring the new-generation 'Skyactiv' technology and the 'KODO—Soul of Motion' design theme.
13
4
Share

How to Shift Gears in Subject Three?

Solutions for engine failing to start: Jump-start by bringing two vehicles close, connecting the positive and negative terminals of their batteries, turning off all auxiliary electrical devices in the vehicles, and starting the vehicle with the dead battery. After starting, gently press the accelerator pedal, turn off the ignition switches of both vehicles, and carefully remove the cables. Push-start by utilizing a downhill slope, turning on the ignition switch before pushing the vehicle, shifting the transmission into 2nd gear once the desired speed is reached, and quickly releasing the clutch pedal while applying throttle. During startup, pressing the accelerator increases throttle opening, allowing more air intake and fuel injection, making it easier to start. Note that a dead battery, typically lasting about 2 years or around 80,000 kilometers, usually triggers a warning in most vehicles. Charge or replace the battery as needed. Always refuel at reputable stations to avoid affecting the vehicle's lifespan, and regularly clean the fuel injectors.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.