What are the procedures for vehicle annual inspection?

Does the 2019 Bora have front and rear anti-collision beams?

The 2019 Volkswagen Bora is equipped with both front and rear anti-collision beams. The front and rear anti-collision beams have the following advantages: Front anti-collision beam: The front anti-collision beam can protect many important components in the front of the car, thereby reducing the owner's repair costs. Rear anti-collision beam: The rear anti-collision beam can also protect the car body, preventing damage to the body structure. The Bora is a very classic compact sedan under the Volkswagen brand, and this model enjoys good sales and reputation in China. The 2019 Volkswagen Bora is equipped with two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine, compliant with the China VI emission standard, has a maximum power of 83 kW, a maximum torque of 145 Nm, a maximum power speed of 6,000 rpm, and a maximum torque speed of 3,900 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.

8

5

Share

What is the size of the Magotan's wheel rims?

The wheel rim size of the Magotan is 16 inches. The wheel rim is the central part of the wheel where the axle is installed, commonly referred to as the 'rim' or 'steel rim'. Wheel rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode and deform, leading to potential safety hazards. Wheel rims are divided into steel rims and alloy rims, with the differences as follows: 1. The main advantage of steel rims is their simple manufacturing process (usually using casting techniques, whereas alloy rims are typically produced using low-pressure casting), relatively lower cost, and strong resistance to metal fatigue. 2. Steel rims are heavier (the same rim made of steel is much heavier than one made of aluminum alloy), have greater inertial resistance, poorer heat dissipation, and are prone to rust. 3. Alloy rims are lighter in weight, have smaller inertial resistance, higher manufacturing precision, and less deformation at high speeds, which helps improve the vehicle's straight-line driving performance, reduces tire rolling resistance, and consequently decreases fuel consumption. 4. The thermal conductivity of alloy materials is about three times that of steel, providing better heat dissipation, which can have a positive effect on the vehicle's braking system, tires, and the thermal attenuation of the braking system.

19

1

Share

Where is the Car Tire Pressure Monitoring Located?

Tire pressure monitoring devices can be divided into built-in tire pressure monitoring and external tire pressure monitoring based on the installation position of the sensor. The built-in type has its sensor installed inside the tire, replacing the original valve stem, while the external type adds a sensor outside the valve stem. Tire Pressure Monitoring: Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting drivers to tire leaks or low pressure to ensure driving safety. Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts when tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in faster rotation compared to other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.

5

0

Share

How to Reset the Tire Pressure Monitoring on Volkswagen Tayron?

Method to reset the tire pressure light on Volkswagen Tayron: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the air pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped.

11

5

Share

Where is the disp button on the Changan CS15?

The disp button on the Changan CS15 is located on the steering wheel. By pressing the disp button, you can access four types of vehicle information: 1. Mileage. 2. Fuel consumption record. 3. Remaining fuel level. 4. Remaining driving range. The advantages of the Changan CS15 can be seen from three aspects: First: Exterior design. The CS15 adopts the latest butterfly-wing family front grille, which is also seen on the latest CS85, giving a more youthful visual effect compared to the older models. Additionally, the CS15 features many black high-gloss decorative elements, significantly enhancing the vehicle's refined feel. Second: Interior design. The CS15 also adopts a completely new interior design style, making the car feel more like a next-generation product both inside and out, with changes visible in almost every area. The newly designed center console follows Changan's latest design philosophy, with a 7-inch LCD instrument panel and a 10.25-inch central control screen standing out. The central control screen integrates the InCall 3.0 intelligent connectivity system, offering excellent display quality and smooth operation. The interior ambiance still conveys a sporty feel, and the black-and-red color scheme is a bold design choice for a car in this price range. Third: Powertrain. The Changan CS15 continues to be powered by the Changan EA series 1.5L naturally aspirated engine, which delivers a maximum power output of 78.5 kW (107 PS) and a peak torque of 145 N·m. The transmission system is paired with a 5-speed manual gearbox or a 5-speed dual-clutch transmission.

8

2

Share

What is the method to reset the tire pressure on the BYD Song?

BYD Song tire pressure needs to be reset, usually due to the following issues. After resolving these issues, driving a few kilometers will automatically reset the tire pressure. The issues are as follows: First: BYD Song tire pressure monitoring alarm. Tire pressure fault warning light: 1. When the 'Start/Stop' button is in the 'ON' position, this light turns on. If the tire pressure monitoring system is functioning normally, the light will turn off after a few seconds. Subsequently, if a system fault occurs, this light will turn on again. 2. When the tire pressure fault warning light turns on or flashes, and the right-side information display shows 'Please check the tire pressure monitoring system' with the tire pressure display interface showing '---', it indicates a fault in the tire pressure system. 3. When the tire pressure fault warning light flashes rapidly, and one or more values on the right-side information display tire pressure interface turn red, it indicates that the corresponding tire is in a rapid air loss state. 4. When the tire pressure fault warning light remains on, and one or more values on the right-side information display tire pressure interface turn yellow, it indicates that the corresponding tire is in an underinflated state. If any of the above situations occur, it is recommended to contact a BYD authorized service center for vehicle inspection. Second: Underinflated tire pressure alarm. 1. When the tire pressure of all four tires is below 75% of the standard tire pressure value and the system is operational, the tire pressure monitoring system will issue a low-pressure alarm signal within 1 minute and indicate the position of the underinflated tire. 2. After the low-pressure alarm, inflate the tire to the standard pressure. When the tire pressure exceeds 90% of the standard pressure, the low-pressure alarm will be canceled. After resolving the above issues, driving a few kilometers will automatically reset the tire pressure.

3

1

Share

What are the procedures for vehicle annual inspection?

Does the 2019 Bora have front and rear anti-collision beams?

What is the size of the Magotan's wheel rims?

Where is the Car Tire Pressure Monitoring Located?

How to Reset the Tire Pressure Monitoring on Volkswagen Tayron?

Where is the disp button on the Changan CS15?

What is the method to reset the tire pressure on the BYD Song?

Which is Better: Wet or Dry Dual Clutch?

How to Install an ETC Device?

What are the causes of unstable idle speed?

Which country produces Mitsubishi engines?