What are the procedures for purchasing parallel imported vehicles?

What brand engine is the BJ40 equipped with?

The BJ40 is equipped with a 2.4L inline-four naturally aspirated engine with the code name G4CA, which is an improvement over the 2.7L engine previously used in the BAW Warrior. It offers two power options: 2.0T and 2.3T, capable of delivering maximum torque outputs of 320N·m and 350N·m, respectively. More details are as follows: 1. Exterior design: The Beijing Auto BJ40, with its rugged SUV style, features numerous right-angle designs, exuding a strong masculine appeal. Interior design: As an off-road vehicle, it does not boast luxurious decorations but adopts a simple and rugged design style reminiscent of the "Wrangler." The window and central locking switches are designed as toggle levers, giving a very retro feel. 2. Powertrain: The BJ40 is powered by a 2.4L naturally aspirated engine, delivering a maximum power of 105kW and a maximum torque of 217Nm, paired with a 5-speed manual transmission. The new vehicle also features a mechanical part-time four-wheel-drive system and employs a body-on-frame structure. Additionally, the Beijing Jeep BJ40's rear suspension is a five-link non-independent setup, providing better support for extreme off-road conditions.

20

3

Share

Is It Normal for the Engine to Shake When Turning on the AC in a New Car?

It is a normal phenomenon. When the car is in an idle state, the engine continues to run, and shaking when the AC is turned on is quite normal. Idling is a working condition of the car, referring to the engine running in neutral gear. The engine speed during idling is called the idle speed. The idle speed can be adjusted by modifying the throttle opening size, among other methods. Below is additional information about idling: Normal Idling: When the vehicle is parked and the engine is started, the minimum stable engine speed is referred to as parking idle (the process of transitioning from a cold engine idle state to an idle state where the engine reaches normal operating temperature is called warming up or heating the engine). Driving Idle: When the car is in gear, without pressing the accelerator pedal or releasing it while driving, maintaining the minimum throttle opening, the engine speed matches the parking idle speed. This state is called driving idle.

10

1

Share

What causes the excessive resistance in the B1346 driver's seat airbag?

It may be due to poor contact in the airbag connector or a broken airbag clock spring. Here are the relevant details: Specific causes: If the car displays excessive airbag resistance, you can clean the connector box and check for loose connections. If the issue persists, remove the airbag and replace it with a 2 to 3 ohm resistor to see if the fault code remains. If the fault code no longer appears, it indicates an internal airbag fault, and the airbag needs to be replaced. Check if the airbag connector is normal, with no signs of burning, etc. Measure the resistance of the airbag wiring harness. If the resistance is abnormal, simply replace the wiring harness. Airbag location: Airbags are positioned in the front passenger and driver seats, the front and rear sides of the vehicle, and the roof in three directions. The airbag consists of three parts: the airbag itself, sensors, and the inflation system. The function of the airbag is to reduce the severity of occupant injuries during a collision, prevent secondary collisions, or protect occupants from being thrown out of their seats in dangerous situations such as vehicle rollovers.

7

2

Share

What are the reasons for the Lynk & Co 01's network connection failure?

Lynk & Co 01's network connection failure may be due to the vehicle system being in an upgrade phase while in a shutdown state, causing the network module to enter an infinite crash state, resulting in disconnection and inability to connect. The solution is to power off and restart or remove and reinstall the car's fuse box to restore the network. Below is more information about the Lynk & Co 01: 1. Powertrain: The car is equipped with a 2.0TD turbocharged engine from the Drive-E series, with a maximum power of 140kW/4500rpm and a maximum torque of 300Nm/1400-4000rpm. Its fuel consumption per 100 kilometers is under 7L, with the two-wheel-drive model at 6.5L/100km and the four-wheel-drive model at 6.9L/100km. The 0-100km/h acceleration times are 7.7s and 7.9s, respectively. 2. Configuration: The Lynk & Co 01 features a comprehensive NVH luxury configuration, which prevents noise and vibration at the source; blocks noise transmission paths, optimizes sound quality for greater purity and stable frequency; and is equipped with an INFINITY Hi-Fi level 10-speaker audio system with a total power of 360W, which is a luxury car-level audio configuration.

19

4

Share

What are the differences between the Volkswagen Magotan 330 and 380?

The Magotan 330 and 380 represent the 2.0T low-power engine and 2.0T high-power engine, respectively. The main differences are: The Magotan 380 is the high-end version of the 330, offering stronger performance. The newly redesigned Magotan has discontinued the 1.8T engine and now features a 1.4T and 2.0T high/low-power engine. The 330 and 380 are merely standards for measuring vehicle parameters. More details are as follows: 1. In terms of power, the 330 model is equipped with a 2.0T low-power engine, delivering a maximum power of 186 horsepower and a peak torque of 320 Nm. It is paired with a 7-speed wet dual-clutch transmission, achieving a 0-100km/h acceleration time of 7.6 seconds in tests. The Magotan 380 is the high-end version of this model, featuring a 2.0T high-power turbocharged engine with a maximum power of 220 horsepower and a peak torque of 350 Nm. It also uses a 7-speed wet dual-clutch transmission, with a tested 0-100km/h acceleration time of 6.99 seconds. 2. The new Magotan 330TSI and 380TSI both come with a 2.0T displacement engine, coded as EA888. This engine employs intake manifold injection + direct cylinder injection technology, also known as hybrid fuel injection technology. Compared to the high-power version, the low-power version has a 34-horsepower difference, which involves single and dual fuel pipe injection, reflecting different engine tuning methods.

20

2

Share

Can I Apply for a Green License Plate If I Already Have a Shanghai License Plate?

After obtaining a Shanghai license plate, you cannot apply for a new energy green license plate in Shanghai. Here are the relevant details: Reason: Consumers who purchase new energy vehicles for non-operational purposes and do not have a new energy vehicle registered under their name using the city's special license plate quota. Under the principle of total control for non-commercial passenger vehicles, the city provides special license plate quotas free of charge. Additional Information: Consumers can apply for vehicle registration with the Municipal Public Security Bureau according to the current motor vehicle registration procedures, using materials such as the car purchase invoice, special license plate quota, and relevant tax payment certificates.

18

5

Share

What are the procedures for purchasing parallel imported vehicles?

What brand engine is the BJ40 equipped with?

Is It Normal for the Engine to Shake When Turning on the AC in a New Car?

What causes the excessive resistance in the B1346 driver's seat airbag?

What are the reasons for the Lynk & Co 01's network connection failure?

What are the differences between the Volkswagen Magotan 330 and 380?

Can I Apply for a Green License Plate If I Already Have a Shanghai License Plate?

How is the Subaru Forester?

What type of gasoline should a Mercedes-Benz A200 use?

What are the differences between Mercedes-Maybach and S-Class?

What Causes the Dashboard Lights to Illuminate but the Car Fails to Start?