What are the procedures for changing car color with film?

1 Answers
LaKaylee
07/29/25 6:06pm
The required documents for applying to change the body color of a motor vehicle include: "Motor Vehicle Modification Registration Application Form", identity proofs and copies of the vehicle owner and agent, motor vehicle registration certificate, and motor vehicle license. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law", if the color change area of a motor vehicle does not exceed 30%, no modification registration is required. Conversely, if it exceeds 30%, it must be filed and registered within 10 days after the vehicle color change. Precautions for changing vehicle color with film: Before preparing to change the vehicle color with film, it is necessary to consult the local vehicle management office where the vehicle is registered to confirm whether this method of color change is permitted in the region. If the region does not support this method, the modification cannot be filed, and the film must be completely removed to restore the original vehicle color. Additionally, according to the "Motor Vehicle Registration Regulations", vehicle owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for modification registration with the vehicle management office. According to Article 10, registered motor vehicles must apply for modification registration with the local vehicle management office under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of use nature, such as commercial vehicles converted to non-commercial use or vice versa. Change of the vehicle owner's residence in or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with specified patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from using patterns, alarms, or signal lights that are exclusive to or similar to those of the aforementioned vehicles. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without completing the required modification registration, the public security traffic management department may issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color.
Was this review help?
12
1
Share
More Forum Discussions

How to Clean a Car Chassis?

Methods for cleaning a car chassis: 1. Lift the car to working height and rinse the chassis with a high-pressure water jet. Pay special attention to curved areas, edges, and fender liners, ensuring no mud or grease remains; 2. For particularly stubborn grease, use degreasing cleaner and a scraper to carefully clean until the chassis returns to its original color; 3. If rust is present, remove it with sandpaper. After cleaning, dry and wipe the chassis, then evenly spray a rust-proofing agent to form a durable protective film. Allow it to air dry naturally after completion. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a car. It supports and mounts the engine and its components, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation.
15
3
Share

What to Do When Unable to Identify the Source of Car Chassis Noise?

Here are the possible causes and suggestions for chassis noise: 1. Shock absorber noise, which can be heard on uneven roads or during turns. It is recommended to replace the shock absorber. 2. Due to the balance bar rubber sleeve breaking or loosening because of suspension noise, it is advised to check if the balance bar rubber sleeve is loose. 3. Suspension rubber sleeve breakage or loosening. It is recommended to inspect the suspension for any issues. 4. Disc brake noise. This occurs when the brake shoe support plate, damping spring plate, or guide plate of the disc brake is damaged, deformed, or detached, increasing the gap between the brake shoe and the caliper support frame, causing them to collide and produce noise. Visit a repair shop to fix the deformed parts or replace the detached components. 5. Front suspension ball joint noise. The gap between the ball joint and its seat becomes larger, leading to severe looseness. Since the ball joint seat is a sealed structure and cannot be disassembled, the only solution is to replace it at a repair shop. 6. Front wheel shock absorber noise. This is usually caused by driving on rough roads and improper maintenance, resulting in oil leakage and damage to the shock absorber. Depending on the severity of the damage, it may require repair or replacement. 7. Drive shaft universal joint noise. This is due to excessive play or jamming in the universal joint. The main reasons for noise in the universal cross shaft are the lack of lubrication or delayed maintenance. In such cases, visit a repair shop for greasing or repair.
11
2
Share

What is the motor power of the Renault City K-ZE?

The maximum power of the Renault City K-ZE motor is 33kw. The Renault City K-ZE is the first pure electric vehicle launched by Renault. The K-ZE is built on an electric drive platform jointly developed by the Renault-Nissan Alliance, and the positioning of this car is a pure electric SUV. The dimensions of the Renault City K-ZE are 3735mm in length, 1579mm in width, and 1484mm in height, with a wheelbase of 2423mm. The exterior design of the car basically adopts the Renault family-style face, but some details have been modified. For example, the front emblem uses a closed grille complemented by a U-shaped chrome trim, and there are quite a few black trim pieces around the body, adding many traditional SUV elements. The overall design style is very rounded and cute.
17
3
Share

How to Adjust the Valves on a Nissan Sylphy?

Here are the steps to adjust the valves on a Nissan Sylphy: 1. Warm up the engine until the coolant temperature reaches 80~90°C. Open the timing mark inspection hole on the clutch housing and the cylinder head cover, ensuring the cylinder head bolts are tightened to the specified torque. 2. Rotate the crankshaft to align the "0" mark on the flywheel with the mark line on the clutch housing. Confirm that the curved surface of the intake and exhaust valve rocker arms of the first cylinder is in contact with the camshaft cam base circle, meaning the first cylinder piston is at the compression top dead center. If the rocker arm is in contact with the cam, rotate the crankshaft 360 degrees, at which point the valves are in the closed position. 3. Loosen the lock nut (2) of the adjustment screw (1). Use a screwdriver to turn the adjustment screw so that the gap (A) between the lower end of the screw and the upper end of the valve stem (3) reaches the specified clearance value, as determined by the thickness of a feeler gauge. Keep the screwdriver steady and tighten the lock nut to the specified torque. Then, recheck the gap (A) with the feeler gauge. This completes the adjustment of the intake and exhaust valve clearances for the first cylinder. 4. Then, rotate the crankshaft clockwise (viewed from the front of the engine). For a 4-cylinder engine, every 180 degrees of rotation allows adjustment of the valve clearance for the next firing cylinder in the firing order (1-3-4-2). For a 3-cylinder engine, every 240 degrees of rotation allows adjustment in the firing order (1-2-3). The angle of crankshaft rotation can be calculated using the number of teeth on the flywheel ring gear.
18
0
Share

How Many Times Can a Motorcycle Temporary License Plate Be Applied For?

Motorcycle temporary license plates can be applied for 3 times. It should be noted that there are two types of temporary license plates with different validity periods: one for use within the city, valid for 15 days (totaling 45 days for three applications), and another for inter-provincial use, valid for 30 days (totaling 90 days for three applications). It is recommended to apply for the 30-day validity period for greater convenience. Documents required for applying for a motorcycle temporary license plate: Original and photocopy of the vehicle qualification certificate (import vehicles require import documentation); Original and photocopy of the third copy of the compulsory traffic insurance; Original and photocopy of the owner's identity proof; If applying through a proxy, original and photocopy of the proxy's ID are required. Scenarios requiring a temporary license plate: When driving the vehicle from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office of the purchase location; When transferring vehicle registration and the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the original location; For a new vehicle in the local area that has not yet obtained an official license plate and needs to be driven to another location for modifications, a temporary license plate must be applied for locally, and after modifications, a temporary license plate must be applied for at the modification location to drive back; When purchasing a vehicle locally and needing to drive it to another location, a temporary license plate must be applied for locally to drive to the other location, and vice versa; When the vehicle registration is not yet fixed and temporary use is required.
10
3
Share

What transmission does the Q5L use?

Audi Q5L uses a transmission provided by Volkswagen. The Volkswagen Group operates 68 wholly-owned and joint venture companies worldwide, with business areas covering automotive R&D, production, sales, logistics, services, auto parts, car rentals, financial services, auto insurance, banking, IT services, and more. The Audi Q5L is equipped with a 7-speed wet dual-clutch transmission. The 7-speed dual-clutch transmission features seven forward gears and utilizes a wet clutch design. The wet dual-clutch transmission consists of two multi-plate clutches (one large and one small) mounted coaxially within a sealed hydraulic oil chamber. This wet clutch structure offers superior modulation capability and higher heat tolerance, enabling it to handle greater torque transmission. For the Audi Q5L's transmission in daily use, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change transmission fluid can damage internal components such as bearings and housing. Avoid prolonged coasting in neutral. While manual transmission drivers often coast in neutral, doing so in an automatic can cause overheating and create shock when shifting back to D. Never shift to D/R before coming to a complete stop. Some drivers shift directly into reverse while still moving to demonstrate 'smooth' operation, but this severely damages transmission gears and may cause grinding over time. Don't frequently climb steep slopes in D mode. Automatic transmissions may overheat under heavy load or upshift prematurely during steep climbs. Use manual mode to maintain low gears or sport mode to protect the transmission. Never tow long distances. For disabled automatic vehicles, use a flatbed tow truck with the vehicle in N gear rather than tow ropes or direct towing.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.