What are the procedures after a one-time deduction of 12 points from the driver's license?

1 Answers
JoannaRose
07/30/25 10:01am
The procedures after a one-time deduction of 12 points from the driver's license include the following 3 steps: 1. Accept the penalty: The driver involved must go to the traffic police station within 15 days to accept the penalty. If they fail to do so within 15 days, the traffic police station will publish a notice online and directly revoke the driver's license; 2. Complete the learning procedure: The driver involved must take the study voucher issued by the traffic police station to the local vehicle management office to complete the learning procedure. After paying the fee, they must study for 7 consecutive days and then take the theoretical test for Subject 1 at the designated driving school by the vehicle management office; 3. Clearance after passing: After passing the test, the driver can take the passing notice to the traffic police station to retrieve their driver's license. The deducted points will be cleared, and the driver can resume driving. If the driver accumulates 12 points twice within one year (i.e., more than 24 points), they will need to complete the learning process and pass both Subject 1 and Subject 3 tests before retrieving their driver's license.
Was this review help?
1
2
Share
More Forum Discussions

How to Remove the Spare Tire of Toyota Highlander?

Toyota Highlander removing the spare tire method is: 1. Open the rear door of the Highlander; 2. Open the outer cover plate of the rear compartment floor; 3. Lift the cover plate on the right side of the vehicle; 4. Loosen the adjacent screw to remove it. The Toyota Highlander belongs to the midsize SUV category, with body dimensions of: length 4890mm, width 1925mm, height 1715mm, wheelbase 2790mm, and fuel tank capacity 72.5L. The Toyota Highlander is equipped with a 2.0T turbocharged engine, with a maximum power of 162kW and a maximum power speed range of 5200 to 5600 rpm.
20
2
Share

Do You Need to Press the Brake When Shifting from D to S Gear?

Shifting from D to S gear does not require pressing the brake. Situations where you need to press the brake when shifting gears are as follows: 1. Shifting from P gear to any other gear requires pressing the brake. This is a safety feature to ensure driving safety. Otherwise, when shifting from P to R or D, the car immediately gains backward or forward driving force. The handbrake alone may not be sufficient to stabilize the car, which could lead to danger. If the accelerator is accidentally pressed at the same time, even pressing the brake afterward might sometimes be too late, easily causing accidents involving people or facilities. 2. D-N, R-N: When shifting an automatic transmission car from D or R gear to neutral, it is best to bring the car to a complete stop before operating, during which the brake should be pressed. This is because the gear positions in an automatic transmission are controlled by the clamping and releasing of one-way clutches. Different gears in an automatic transmission are achieved through planetary gear mechanisms, where locking the planetary gears, sun gear, or planetary carrier with gear clutches results in different gear positions. Gear clutches consist of multiple friction plates and pressure plates, with the friction plates connected to the planetary gear mechanism and the pressure plates connected to the transmission housing.
20
0
Share

Are the Land Cruiser and Land Cruiser Prado the same vehicle?

Land Cruiser and Land Cruiser Prado are the same vehicle, belonging to the mid-to-large-size SUV category. The body dimensions are: length 5095mm, width 1975mm, height 1930mm, wheelbase 2850mm, fuel tank capacity 138L, and tire specification 285/65R17. The Land Cruiser is equipped with a 4.0L naturally aspirated engine, with a maximum power of 202kW at 5600rpm, and a maximum torque of 385Nm. It is paired with a 5-speed automatic transmission, featuring a double-wishbone independent front suspension with coil springs and a four-link non-independent rear suspension.
5
5
Share

What does the ESC button in a car mean?

The ESC button in a car refers to the Electronic Stability Control system, whose function is to monitor the driving state of the vehicle and prevent the car from deviating from the ideal trajectory during emergency obstacle avoidance or when understeer or oversteer occurs during turns. The buttons in a car and their functions are divided into: 1. Fuel tank opening button: remotely opens the fuel tank cap from inside the car; 2. Parking sensor button: turns the car's parking sensor system on or off; 3. Central locking button: the control button for the car's central door locking system; 4. Rear sunshade button: controls the opening and closing of the electric rear sunshade inside the car; 5. Headlight cleaning button: controls the automatic cleaning function of the headlights.
4
0
Share

What is the function of paddle shifters?

The function of paddle shifters is to allow the driver to perform gear shifting operations without taking their hands off the steering wheel. As a rapid shifting device, it can enhance driving maneuverability. The method of using paddle shifters is as follows: 1. Fully depress the car's brake pedal; 2. Press the car's one-touch start button; 3. Place the car's automatic gear lever in the D position to enter automatic mode; 4. Pull the plus (+) paddle on the steering wheel to increase the gear; 5. Pull the minus (-) paddle on the steering wheel to decrease the gear. Paddle shifters are categorized by form into: 1. Fixed type: The steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: The paddle shifters rotate simultaneously with the steering wheel as a whole.
20
0
Share

How to Turn on the High Beams on a Cruze?

The method to turn on the high beams on a Cruze is to push the light control lever outward. The function of the high beams is to improve visibility and expand the field of view. The Cruze is a compact car with the following dimensions: length 4666mm, width 1807mm, height 1460mm, wheelbase 2700mm, fuel tank capacity 52 liters, and trunk capacity 430 liters. The Cruze is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5600 rpm and a maximum torque of 240Nm, paired with a 7-speed dual-clutch transmission.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.