···
Log in / Register

What Are the Preparations for Subject 2?

4 Answers
StGrant
09/03/25 6:48am

Here is an introduction to the preparations for Subject 2: Mock Exam: The purpose of the mock exam is to familiarize candidates with the test environment and allow the coach to guide them on areas where points are easily deducted. Ensure Adequate Sleep: Make sure to get a good night's rest the day before the exam to avoid involuntary nervousness or dizziness during the test. Bring Your ID: You must bring your ID card to the exam; without it, you will not be allowed to take the test. Ensure Proper Setup: Remember to adjust the seat and rearview mirrors to the most comfortable and convenient position for you. Unfamiliarity with the rearview mirrors and seat can directly affect your judgment during the exam. Reverse Parking: Control your speed—not too slow, but don’t let the car stop. Find the reference point and reverse slowly to avoid going too fast and not having enough time to turn the steering wheel, which could result in crossing the line. Parallel Parking: Remember to turn the steering wheel quickly in coordination with the car’s movement speed, and find the right angle. If the steering wheel is turned too slowly, it may easily result in failure.

Was this review help?
9
5
Share
Madeleine
09/15/25 8:09am

As someone who has passed the driving test, I believe the key to preparing for Subject Two is practicing the basic maneuvers repeatedly, such as reverse parking and hill starts, until they become muscle memory. Back then, I dedicated two hours daily to practice at the driving school, working closely with the instructor to familiarize myself with the course layout and mentally noting the reference points for steering. Preparation includes understanding the test rules, like avoiding timeouts or crossing lines, adjusting mirrors for optimal visibility during the test, getting a good night's sleep beforehand to stay calm and composed. Bring some snacks to prevent low blood sugar since the test can be lengthy—I almost made a mistake due to hunger. It's advisable to relax and chat to relieve stress before the test, and have friends simulate a few rounds with you; more practice attempts increase success rates.

Was this review help?
17
1
Share
Expand All
DeJasper
10/30/25 2:01am

From my personal experience, preparing for Subject 2 requires mastering detail control. Maintain steady vehicle speed without sudden acceleration or deceleration, especially when performing parallel parking—steer accurately and keep movements fluid. During practice, frequently check tire pressure and brake responsiveness to avoid mistakes during the test. Stay calm—don’t rush. Take deep breaths to maintain composure. I always set small goals for each practice session, like perfecting right-angle turns that day, gradually building confidence. Familiarize yourself with test site markings and time limits, bring your ID on time, and wear comfortable shoes for clutch control. Also, eat something before practice to stay alert—avoid an empty stomach affecting concentration. Follow this routine, and you’ll pass smoothly.

Was this review help?
15
5
Share
Expand All
JourneyFitz
12/13/25 2:09am

Before taking the Subject 2 test, I focused on practicing reverse parking and curve driving. First, I familiarized myself with the process using a simulation app at home, then memorized reference points on-site, keeping a calm mindset and avoiding overthinking about failure. Preparations included bringing water to stay hydrated and prevent dizziness, arriving half an hour early to get acquainted with the test site, adjusting the seat for comfort, and passing the test with ease.

Was this review help?
14
3
Share
Expand All
More Forum Discussions

Why does the Audi Q5 stall while driving?

A car suddenly stalling while driving is generally caused by the following reasons: 1. Electrical circuit failure: This possibility is that the car stalls due to low-voltage power failure during driving. At this time, you can mainly check the ignition and starter switches, as well as the fuse box. A short circuit in the low-voltage line causes stalling, which occurs intermittently in this case. Check the low-voltage lines. 2. Component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The car may start initially, but then stall after a while, and then start again, only to stall once more. 3. Fuel system failure: Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or an empty fuel tank. However, in this case, the car can be restarted, though with difficulty. 4. Ignition system: Problems with the engine overheating or the anti-explosion system can also cause stalling.
3
2
Share

What is the cause of the P0014 trouble code?

P0014 trouble code may be caused by the B intake/left/front camshaft timing not being set correctly, or the actuator valve stuck in the open position. The following is a detailed introduction to automotive trouble codes: 1. Meaning: Indicates the monitored fault system. P stands for powertrain; B stands for body system; C stands for chassis system; U stands for network or data communication transmission system trouble code. 2. The first digit: It is a generic code (for all vehicle manufacturers) or a manufacturer-specific code. For example: 0 refers to a generic code, 1 refers to a manufacturer-specific code. General Motors Company in the United States has specific numeric type codes to assist in diagnosing vehicle technical conditions. 3. The second digit: Indicates the type of affected fault system, with numbers ranging from 1-7: 1 is the fuel and air metering system; 2 is the fuel and air metering system (specifically referring to poor injection system circuit function); 3 is the ignition system or misfire monitoring system; 4 is the auxiliary emission system; 5 is the speed control and idle control system; 6 is the computer output line system; 7 is the transmission.
14
0
Share

Can You Drive with a T-Box Malfunction?

T-Box malfunction refers to issues with the in-vehicle T-BOX in the telematics system, requiring a visit to the 4S store to check the fault code, which will then determine the fault information. Most problems typically occur with the radar probe, making it impossible to retrieve vehicle information. Below is relevant information: 1. Structure of the T-Box: The T-Box structure includes an STM32F103CBT6 main control and a dual-core STM32F105RBT6 processor. Additionally, GPRS, GPS, a six-axis G-Sensor, and a vibration sensor are called upon by the main control, along with two 12V outputs. The in-vehicle T-BOX communicates with the host via CAN bus, enabling the transmission of commands and information, including vehicle status information and control commands, among others. 2. Functions of the T-Box: The T-Box has a wide variety of functions, the most common being remote query, remote control, and security services.
2
3
Share

Will the Engine Get Waterlogged in the Rain?

Rain will not cause water to enter the engine. This is because the engine's air intake passes through the air filter, which is located in the engine compartment and protected by the hood, preventing water from entering. However, water can enter if the hood is left open or the air filter is removed during rain. Water entering the engine can cause it to stall. If the engine continues to operate, water may reach the spark plugs, leading to stalling. Restarting the engine under such conditions can result in valve damage, and in severe cases, the engine may be irreparably damaged. Additional Information: 1. Water Wading Insurance: Also known as engine-specific loss insurance, this is a derivative of vehicle damage insurance. It is an additional coverage that owners can purchase specifically for engine protection. It provides compensation for engine damage caused by driving through waterlogged roads or flooding. 2. Scope of Application: The insurance covers situations where the insured vehicle is submerged up to the exhaust pipe or intake manifold due to heavy rain or flooding, and the driver attempts to restart the vehicle or uses inertia to start it. It also covers instances where the vehicle is started without necessary post-flooding procedures after exposure to heavy rain or flooding.
2
5
Share

What is the tire inflation warning?

Prompting tire inflation means the tire pressure warning is activated, indicating that one or more tires have insufficient air pressure. Underinflated tires can lead to abnormal wear, shorten tire lifespan, increase fuel consumption, and even raise the risk of a blowout. The standard tire pressure is approximately 2.2 to 2.5 bar. The maintenance methods for car tires are as follows: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should not be too high or too low. Inflate according to the vehicle's recommended tire pressure. In summer, try to keep the pressure slightly lower, while in winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. 2. Frequently inspect tire wear: Some vehicles may experience uneven tire wear ("tire cupping"), so regularly check tires, especially the inner side, for abnormal wear. Pay attention to whether the tread depth on both sides is consistent. 3. Promptly remove small stones and other debris from tires: Debris in tire treads poses potential hazards and can fly out while driving. Use a key or similar tool to remove small stones and keep tires clean. 4. Rotate tires on schedule: Front tires, being steering tires, wear more quickly. To reduce front tire wear, perform a four-tire rotation every 5,000 kilometers after the first maintenance, preferably using the diagonal rotation method.
3
1
Share

What are the common malfunction indicator lights in Buick vehicles?

Buick's malfunction indicator light (MIL) illuminates when the ignition is turned on, indicating that it is operational. If the light remains on while the engine is running, it signifies an abnormality in the emission control system. In addition to the MIL, there are numerous warning and indicator lights. The exclamation mark on the dashboard can appear in three different scenarios: 1. An exclamation mark inside a circled parenthesis: This indicates brake pad wear or insufficient brake fluid. The solution is to release the parking brake and check if the brake fluid level is low. If the light persists, visit a repair shop to replace the brake pads. 2. An exclamation mark inside a triangle: This signals a malfunction in the exterior lights. The solution is to inspect the lights for any faults. If no issues are found but the light remains on, it is advisable to seek professional repair. 3. An exclamation mark inside yellow parentheses: This indicates a problem with the tire pressure in one of the tires. The solution is to check if the tire is punctured or leaking air. If not, drive at a low speed and locate an auto repair shop, car care center, or roadside car wash, as these places typically have air pumps to inflate the tire. After inflating, observe the dashboard. If the warning light does not turn off, access the settings via the vehicle's central console to recheck the tire pressure. Once the pressure is confirmed to be normal, the light should extinguish.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.