What are the preparations before the Subject 3 driving test?

1 Answers
MacJoy
07/24/25 5:34pm
Preparations before the Subject 3 driving test include adjusting the driver's seat, adjusting the left and right rearview mirrors, fastening the seat belt, and starting the ignition. Below is an introduction to Subject 3: Introduction: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles. Specific test content of Subject 3: The road driving skills test generally includes: preparation before driving, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.
Was this review help?
13
4
Share
More Forum Discussions

How Early Can an Annual Vehicle Inspection Be Conducted?

An annual vehicle inspection can be conducted up to three months in advance. Before applying for the inspection, the vehicle owner must resolve all traffic violations and accidents related to the vehicle. The vehicle management office should, within one day of accepting the application, verify the vehicle, review the submitted documents and certificates, and issue the inspection compliance mark. Annual vehicle inspection is a mandatory test for every vehicle (motor vehicle) that has obtained an official license plate and registration certificate. Its purpose is to examine the main technical conditions of the vehicle, encourage enhanced maintenance and care, ensure the vehicle remains in good condition, and guarantee driving safety.
18
1
Share

What is the general pressure for car air conditioning pressure testing?

Car air conditioning pressure testing is generally performed with low-pressure charging, within 15 kilograms, but it is best to charge both high and low pressure simultaneously. This prevents the low-pressure gas from being unable to enter the high-pressure pipeline if the dryer bottle becomes blocked. When charging both high and low pressure, it is necessary to monitor the pressure on the high-pressure gauge because the low pressure has already been fully charged. The pressure in a car air conditioning system is influenced by various external conditions, such as ambient temperature, engine speed, and the cooling conditions of the condenser. Therefore, the standard for testing the pressure of a car air conditioning system is based on a specific ambient temperature, compressor speed within a certain range, and condenser cooling under certain conditions, rather than a fixed standard.
11
5
Share

Where to Check the Production Date of a New Car?

New car production dates can be checked in two locations: the co-pilot side and the vehicle certification. Details are as follows: 1. Below the B-pillar on the co-pilot side, which can be seen by opening the door. This nameplate only specifies the year and month, and includes the vehicle's chassis number. 2. The vehicle certification that comes with the new car, located in the upper right corner of the certification. The production date marked here can be specified down to the year, month, and day. Note: This may not apply to all vehicle models. When a new car arrives at the dealership, there will be a paper nameplate on the front windshield near the driver's seat. This paper nameplate includes the chassis number and the official fuel consumption data from the Ministry of Industry and Information Technology. If the bottom of the paper nameplate specifies the year, month, and day, then the production date on this nameplate can be used as a reference. If the nameplate only specifies the year and month, it cannot be used as the production date.
11
1
Share

How to Disconnect the Battery?

Method to disconnect the battery: Simply disconnect the cable connected to either the positive or negative terminal, and ensure the removed cable is insulated. If a battery remains unused for an extended period, it will gradually self-discharge until it becomes unusable. Therefore, it's advisable to start the car periodically to recharge the battery. The vehicle's battery, also known as a storage battery, is a device that converts chemical energy into electrical energy. Its primary function is to supply power to the engine. When the vehicle is about to start, the battery discharges electricity to the starter, which then drives the flywheel and crankshaft to start the engine. Once the engine begins operating normally, the battery collects and stores electrical energy for future use.
19
4
Share

Where is the handbrake located in the Crown car?

The handbrake of the Crown car is positioned where the clutch pedal would be in a manual transmission. To engage the handbrake, press down on the handbrake pedal, and a circle with an exclamation mark in the middle will appear on the dashboard, indicating that the handbrake is locked. When you want to release the handbrake, there is a drawer-like handle near the door, below the steering wheel on the left side, which features the same symbol as the handbrake indicator on the dashboard. Pull this handle to release the handbrake. The Crown measures 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm. The car is equipped with a 2.0T turbocharged engine, which delivers a maximum power of 173kW and a maximum torque of 350Nm.
5
0
Share

How to remove the rear seats of the Buick Verano?

Buick Verano rear seat removal method: There is a pull strap in the middle of the rear seat. Pull the inner side of the strap upward to remove the rear seat; After removing the rear seat, there are also hooks on both sides of the rear seat that need to be removed; After removing the hooks on both sides, there is a release mechanism for the backrest near the door. Pull the handles on both sides to fold down the backrest; The rear seat seatbelt also needs to be unlatched, and then the rear seats can be completely removed. The Buick Verano is a mid-size sports sedan under SAIC-GM Buick. In terms of body dimensions, its length, width, and height are 4723mm, 1802mm, and 1466mm (1476mm) respectively, with a wheelbase of 2700mm.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.