What are the precautions when turning a car?

2 Answers
QuinnDella
07/29/25 10:50am
When turning a car, the steering wheel should be operated in accordance with the curvature of the road and coordinated with the driving speed to ensure appropriate steering angle, proper timing for turning, and timely correction of direction. It is strictly forbidden to take both hands off the steering wheel to prevent dangerous deviations in direction. More detailed information is as follows: 1. Slow down when turning: Avoid turning the steering wheel too sharply to prevent excessive centrifugal force causing the car to skid. If the car skids, immediately release the accelerator pedal and turn the steering wheel toward the side where the rear wheels are skidding. Once the vehicle resumes straight driving, correct the steering wheel and continue driving. 2. Avoid using the brakes: When turning, try to avoid using the brakes, especially emergency braking, to prevent skidding or accidents. 3. When making left or right turns at intersections, the driver must use turn signals: a) Left turn: In addition to signaling and changing lanes in advance, try to stay close to the center of the road while waiting to turn to facilitate the passage of vehicles behind. b) Right turn: In addition to merging into the outer lane in advance, use the right turn signal to alert pedestrians on the roadside. Reduce speed when turning right and be mindful of the impact of the inner wheel difference to avoid scraping pedestrians.
Was this review help?
5
4
Share
VonElaina
08/13/25 4:12pm
Having driven for over a decade, I deeply understand that safety is paramount when turning, with no room for negligence. The top priority is to slow down before entering a curve, especially at highway exits or sharp mountain road bends, maintaining a speed about 20 km/h lower than straight-line driving to avoid fishtailing or loss of control. Activate the turn signal at least three seconds in advance to alert following vehicles and pedestrians—observe carefully before moving, don’t rush. Quickly scan the rearview mirror, then turn your head to check blind spots, as motorcycles or bicycles often hide in corners; a momentary lapse can lead to accidents. On rainy or snowy slippery roads, control must be gentler: brake lightly and avoid sharp steering to prevent skidding. I still remember that near-miss with a pedestrian while turning on a wet road—only my early speed reduction saved the day. In short, stay focused, avoid phone distractions, and only accelerate after ensuring full safety.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Is there still an annual inspection sticker for vehicle inspection in 2021?

In 2021, vehicles no longer require any physical stickers to be displayed. Since June 2020, China has implemented electronic annual inspection labels nationwide. When vehicle owners complete their annual inspection, they will not receive a paper inspection sticker. Instead, they can directly obtain the electronic inspection label through the Traffic Management 12123 app. Important notes for vehicle annual inspection: Upon arrival at the inspection station, the first step is the exterior inspection. The vehicle owner needs to park the car in the designated inspection area, prepare the fire extinguisher and triangular warning sign, open the engine compartment and trunk, and wait for the staff to conduct the inspection. During the exterior inspection, the staff will provide two forms: the Motor Vehicle Inspection Record Form and the Motor Vehicle Safety Technical Inspection Certificate (some inspection stations may require owners to collect these forms from the service hall themselves). The staff will check and record the vehicle's frame number, engine number, and other details, while also verifying the presence of safety equipment such as the triangular warning sign and fire extinguisher.
10
0
Share

Can an Electronic Driver's License Replace a Paper Driver's License?

In cities piloting the electronic driver's license, the electronic version can be used in place of the paper driver's license. Here is relevant information: Viewing Location: The electronic driver's license for motor vehicles can be viewed on the mobile app "Traffic Management 12123," which is a client launched by the Internet-based Comprehensive Traffic Safety Service Management Platform. The app's related technology is provided by the Traffic Management Research Institute of the Ministry of Public Security, facilitating the handling of motor vehicle driver's license and motor vehicle registration certificate-related services. Important Notes: When driving a motor vehicle, it is mandatory to carry the driver's license at all times. The driver's license must not be altered privately. Pay attention to the renewal period of the driver's license and the deadline for submitting the physical examination certificate. Only such a driver's license can provide normal service. The motor vehicle driver's license must not be lent to others for use.
2
1
Share

Is it mandatory to service an Audi at a 4S dealership?

Audi maintenance does not explicitly require servicing at a 4S dealership. However, if the vehicle is still under warranty, it is recommended to have maintenance performed at a 4S dealership. For vehicles no longer under warranty, owners may choose reputable repair shops for maintenance services. Introduction to automotive maintenance: Automotive maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle, also known as vehicle upkeep. Scope of automotive maintenance: Modern vehicle maintenance primarily covers engine systems, transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, and more. Purpose of automotive maintenance: The purpose of automotive maintenance is to maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent malfunctions, slow down deterioration processes, and extend the vehicle's service life.
8
1
Share

What does the semi-engaged state mean?

Semi-engagement refers to a working state of the clutch. Here is the relevant information: Clutch semi-engagement: At this time, the clutch disc and the flywheel are not in close contact, but are lightly pressed together with relative sliding between them. This is the semi-engaged state. In terms of the clutch pedal, it means the pedal is not fully released, approximately halfway. When slowly releasing the clutch, once you feel the engagement, hold the clutch steady at that position. This is called the half-clutch or semi-engaged state. Wear: During semi-engagement, because the clutch disc and flywheel are in sliding friction, the clutch disc will experience more wear. However, as long as the engine speed is not too high and the duration is not too long, the wear won't be too severe. There's no need to worry too much about it. The primary concern should be maintaining the vehicle's smooth and safe operation, with wear being a secondary consideration.
5
5
Share

What version is the Land Cruiser GXR?

Toyota Land Cruiser models have different letters at the back indicating different configurations, and the GXR model is the lowest configuration, also an entry-level model. The Toyota Land Cruiser is a mid-to-large size SUV, with dimensions of 5095mm in length, 1975mm in width, 1930mm in height, and a wheelbase of 2850mm. Land Cruiser Engine: The Toyota Land Cruiser is equipped with two types of engines, one is a 4.0-liter V6 naturally aspirated engine, and the other is a 4.6-liter V8 naturally aspirated engine; Engine Technology: The Toyota Land Cruiser engine is equipped with VVT-i technology and multi-point electronic fuel injection technology, and uses an aluminum alloy cylinder head and block.
17
5
Share

What is the reason for the restricted fault in Song Plus-DMI-EV?

Song Plus-DMI-EV restricted fault may be caused by the battery or battery control system, such as inconsistency of a certain battery, loose fuse or wiring, or control module issues. Song PLUS is a new compact SUV under BYD, positioned between Song Pro and Tang in the future, offering consumers a variety of powertrain options. BYD Brand History: BYD Company Limited was founded in 1995, starting with a team of over 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Within just one year, BYD Auto expanded its product line from the single "Flyer" microcar to a full range of products including A-class fuel vehicles, C-class fuel sedans, lithium-ion electric vehicles, and hybrid vehicles. BYD Brand Introduction: BYD Auto follows a development path of independent research, independent production, and independent branding, committed to creating truly affordable and high-quality vehicles for the people. The product designs incorporate advanced international trends while aligning with the aesthetic concepts of Chinese culture.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.