What are the precautions to prevent car scratches?

1 Answers
AdrianaLee
07/29/25 5:48pm
To prevent car scratches, park within the security guard's line of sight, choose open areas for temporary parking at night, and maintain a lateral distance of within 60 centimeters. Below are the precautions to prevent car scratches: Park within the security guard's line of sight: When parking in a residential area, try to park within the security guard's line of sight to reduce the risk of malicious scratches, especially in communities with less strict property management. Choose open areas for temporary parking at night: For temporary parking at night, select an open area and turn on the hazard warning lights and other small lights to prevent rear-end collisions due to poor visibility. If parking for an extended period, park near streetlights to avoid both collisions and theft. Maintain a lateral distance of within 60 centimeters: Generally, if two cars are more than 1.2 meters apart, even opening the doors fully will not result in contact with other vehicles.
Was this review help?
2
5
Share
More Forum Discussions

Do I need to manually release the electronic parking brake when starting?

The electronic parking brake will release automatically. When driving, if the car stalls or the seatbelt is unfastened, the electronic parking brake will automatically engage to assist the driver. When you get back in the car, fasten your seatbelt, and close the door, simply pressing the accelerator pedal will automatically release the electronic parking brake. If the electronic parking brake is accidentally engaged while driving at high speed, it will not respond immediately. Instead, it will only activate when the vehicle speed approaches a stop, typically below 10 km/h. The electronic parking brake system offers the following advantages: 1. Eliminating the parking brake lever inside the cabin provides more design flexibility for the interior styling; 2. Replacing the traditional handbrake lever with a button makes operation simpler and less strenuous, reducing the effort required by drivers, especially female drivers; 3. In addition to basic functions like static parking, static release, and automatic release, the system also includes auxiliary features such as automatic parking and dynamic parking.
12
0
Share

Does the Jetour X90 comply with China VI emission standards?

Jetour X90 has models that meet China VI emission standards. Below are the relevant parameters of the Jetour X90 China VI models: 1. Jetour X90 China VI models: The newly launched China VI models include four variants: 1.5T-6DCT Premium, 1.5T-6DCT Comfort, 1.5T-6DCT Smart, and 1.5T-6DCT Luxury. 2. Powertrain parameters of Jetour X90 China VI models: In terms of power, the new car is equipped with a China VI-compliant 1.5T four-cylinder engine, delivering a maximum power of 156 horsepower and a peak torque of 230 N·m, paired with a 6-speed dual-clutch transmission.
9
5
Share

What should be done when a large passenger or cargo vehicle experiences brake failure and loses control?

The correct actions to take when a large passenger or cargo vehicle experiences brake failure and loses control are: utilize obstacles to scrape and stop the vehicle, and firmly grip the steering wheel. Immediately activate the vehicle's hazard warning lights and sound the horn to alert vehicles ahead to yield, while promptly seeking an appropriate road section to decelerate, such as an uphill slope or the emergency escape lanes set up on highways or continuous downhill sections. Emergency escape lanes are located on the right side of the main lane and are commonly installed on continuous downhill sections of highways or expressway descents. Relevant information is introduced as follows: when the brake pedal is depressed, it does not feel soft or sink, but the braking effect is poor. This phenomenon indicates a wheel brake malfunction, such as brake shoes being oily or improperly contacting, friction pads aging or wearing out, or brake drums wearing unevenly. The braking system's technical condition should be inspected and adjusted or repaired if necessary.
14
5
Share

Why does the ignition warning light turn red and the car won't start?

The reasons why the ignition warning light turns red and the car won't start are as follows: 1. Phenomenon: During car driving or at the moment of ignition, the engine warning light on the dashboard lights up, usually in red or yellow. Once lit, in most cases it won't disappear automatically, and only in rare cases will it go away on its own. This is what's known as the engine warning light illumination. 2. Reasons for engine warning light illumination: Poor engine combustion state is the main cause of the engine warning light coming on. In automotive design, to ensure the engine operates in good condition and maintains normal working lifespan, oxygen sensors are installed to monitor the engine's combustion state. Once poor combustion occurs, it not only pollutes the environment but also leads to fuel waste and excessive engine wear.
1
3
Share

What is the difference between Castrol Edge FE and SN?

Introduction to the differences between Castrol Edge FE and SN: 1. Different properties: The FE engine oil contains the latest titanium fluid formula and does not belong to the category of engine oil grades, such as SN, which refers to the oil grade. 2. Different grades: The 'S' in SN stands for lubricating oil for gasoline engines, and 'N' represents the grade, which is arranged in the sequence of the 26 English letters. Currently, the highest grade is N. The 5w-30FE has no grade. 3. Different viscosities: The number before the W represents the flow viscosity under low-temperature conditions. The smaller this number, the better the low-temperature fluidity of the oil, and the better the protection for the engine during cold starts. The number after the W is the viscosity of the oil at 100°C. The higher the number, the higher the viscosity, and the better the protection for the engine under high temperatures.
11
3
Share

What are the reasons why the screen of Audi A6 cannot be raised?

The reasons why the screen of Audi A6 cannot be raised are: 1. Program damage; 2. Lifting gear failure. Taking the 2020 Audi A6 as an example, it belongs to the medium and large car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase of 3024mm, fuel tank capacity of 73l, and curb weight of 1800kg. The 2020 Audi A6 is equipped with a five-link independent suspension in the front and a five-link independent suspension in the rear. It is powered by a 2.0l turbocharged engine, with a maximum horsepower of 190ps, maximum power of 140kw, maximum torque of 320nm, and is paired with a 7-speed dual-clutch transmission.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.