What are the precautions for washing a car by yourself?

1 Answers
DeJake
07/29/25 3:48pm
Precautions for washing a car by yourself: 1. Do not wash the engine compartment randomly, especially avoid using a high-pressure water gun, as the engine compartment is filled with components like circuit boards. Carelessness can easily damage the ignition coil and circuit boards; 2. Choose a windless and cool place for washing, and avoid exposing the car to direct sunlight or windy areas; 3. Pay attention to selecting the correct car washing tools, and check if the tools are clean before washing; 4. Master the necessary car washing techniques. Start by rinsing off sand and dust from the car body with clean water, and after washing, dry the car thoroughly. The towel used for drying should be separate from the one used for washing.
Was this review help?
3
2
Share
More Forum Discussions

Does Geely have models that meet the China VI emission standard?

Geely has models that meet the China VI emission standard, including: Boyue, Vision X3, Binyue, Xingyue, Jiayue, Vision, Emgrand GS, New Emgrand, Emgrand GL, Binrui, Vision SUV, Borui GE, and Vision S1. Taking the Boyue as an example: its exterior dimensions are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm, and it is a 5-door, 5-seat SUV. The Boyue is equipped with a 1.8T turbocharged engine, paired with a 6-speed manual transmission, delivering a maximum horsepower of 163, a maximum power of 120 kW at 5500 rpm, and a maximum torque of 250 Nm.
16
0
Share

What is the parking method for automatic transmission cars?

Parking method for automatic transmission cars: 1. Drive the car into a safe parking area, after stopping, press the brake pedal and shift the gear to N position; 2. Pull up the handbrake and shift the gear to P position. Automatic transmission does not require the driver to manually shift gears, the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The gears on an automatic transmission car are: P gear is the parking gear, also the starting gear; R gear is the reverse gear; N gear is the neutral gear; D gear is the drive gear, also known as the forward gear; S gear is the sport mode; L gear is the low gear. The function of the automatic transmission is to use planetary gear mechanism for shifting, which can automatically shift gears according to the degree of the accelerator pedal and the change of vehicle speed. The driver only needs to control the speed by operating the accelerator pedal.
5
2
Share

Where is the oil dipstick of Audi A4L located?

The oil dipstick of Audi A4L is located next to the engine in the engine compartment. The oil dipstick in a car is a commonly used measuring tool to check the oil level in the lubrication system. Since the dipstick insertion hole has a curved path, the dipstick must be able to deform when inserted and rebound when pulled out. The Audi A4L is a mid-size car under FAW-Volkswagen Audi. Taking the 2020 35TFSI Fashion Dynamic model as an example: the exterior dimensions are 4858mm in length, 1847mm in width, and 1439mm in height, with a wheelbase of 2908mm. It is equipped with a 2.0T turbocharged engine, matched with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 150 hp, a maximum power of 110 kW, and a maximum torque of 270 Nm.
14
2
Share

How to Solve the Issue of ETC Showing Low Battery?

ETC showing low battery requires timely charging: For solar-powered ETC devices, you can drive the vehicle under the sun for a few hours to charge the device. For ETC devices without solar panels, you can plug in a dedicated power cable and charge it using the cigarette lighter socket. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC more advanced, faster, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
9
5
Share

What does the violation code 16371 mean?

The violation code 16371 means: Using a forged or altered motor vehicle license plate. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China," the penalty is: 12 demerit points; a fine ranging from 2000 to 5000 yuan; and other penalties including detention for up to 15 days. Traffic violation codes consist of four to five digits, categorized according to the principles of the traffic law. The sequence from left to right is as follows: the first digit is the behavior classification code, the second digit is the demerit point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the specific item under the category. First digit: Behavior classification code, indicating the category under the Road Traffic Law. Second digit: Demerit point classification code, indicating the category of demerit points for the traffic violation. Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior classification. For example: 13035—"1" indicates a motor vehicle violation, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item under the third category of 3-point violations. Behavior classification code violation descriptions: Codes starting with "1" indicate motor vehicle violations, e.g., 1003. Codes starting with "2" indicate non-motor vehicle violations, e.g., 2002. Codes starting with "3" indicate pedestrian or passenger violations, e.g., 3030. Codes starting with "4" indicate highway violations, e.g., 4002. Codes starting with "5" indicate other regulations, e.g., 5005. Codes starting with "7" indicate provincial, autonomous region, or municipal implementation rules, e.g., 7008. Codes starting with "8" indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to check motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to inquire via touch-screen terminals. Log in to the external service websites of the public security traffic management bureaus of various cities, locate the vehicle violation inquiry section, enter the license plate number and engine number, and click to inquire. Call (area code + 114) to inquire: Follow the operator's prompts to input the license plate number and engine number for inquiry. The operator will then provide the results via voice, which is a relatively quick method. Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to inquire. For example, on an Android phone: Open the Traffic Management 12123 app, log in, and view recent violation records on the homepage.
15
4
Share

What is the 0-100 km/h acceleration time for the Buick Excelle?

According to official data, the Buick Excelle is available with two engine displacements: 1.5L and 1.3T. The 1.5L model accelerates from 0-100 km/h in 12.87 seconds, while the 1.3T model achieves it in 8.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the 2022 Lavida 1.5L model has a maximum torque of 145 Nm with a 0-100 km/h time of 14 seconds, while the Buick Excelle 1.3T model has 141 Nm torque and accelerates in 8.8 seconds. Transmission efficiency: The transmission acts as a medium for power transfer, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Buick Excelle 1.3T model is equipped with a 6-speed automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the 2022 Lavida 1.5L model has a power-to-weight ratio of 91.7 Hp/T with a 0-100 km/h time of 14 seconds, while the Buick Excelle 1.3T model boasts 126.8 Hp/T and accelerates in 8.8 seconds.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.