What are the precautions for using high beams?

1 Answers
McJoanna
07/30/25 8:16am
According to relevant regulations, high beams cannot be used under the following circumstances: 1. Distance: When meeting on roads without central isolation facilities or center lines, high beams cannot be used within 150 meters of an oncoming vehicle. 2. Meeting vehicles: High beams cannot be used when meeting non-motorized vehicles on narrow bridges or roads without central isolation facilities or center lines. 3. Intersections: When passing through intersections controlled by traffic signals, high beams cannot be used while turning. 4. Nighttime: When driving at night without streetlights, poor lighting, or in low visibility conditions such as fog, rain, snow, or dust, high beams cannot be used when a following vehicle is driving closely behind another vehicle in the same direction.
Was this review help?
4
2
Share
More Forum Discussions

How to Remove Rain Repellent from the Windshield?

Clean the windshield thoroughly and wipe it dry with a dry towel. The operation should be performed at a temperature above 6°C; Shake the rain repellent well to ensure the product functions fully; Find a clean, dry sponge and evenly spread the rain repellent sprayed on the car glass; After the glass surface dries, wipe the glass surface with an all-cotton dry cloth or tissue paper.
10
0
Share

How to Remove Water Stains from Car Seats?

First, use a damp cloth to moisten the area with water stains, allowing the stains to become wet. This will make it easier to clean them later. After about half an hour, spray car cleaner on the stained area and gently spread it with a brush. After rinsing off the water stains with clean water, apply a softening cream to the affected area of the car seat.
19
1
Share

How to Remove the Front Wiper Blade?

Gently lift the wiper arm upward in the direction of the wiper blade to move it away from the vehicle body. Locate the securing clip at the connection point between the wiper blade and the wiper arm. Finally, you can separate the wiper blade from the wiper arm. When replacing the wiper blade rubber, note that the hook is only on the side with the cap cover, not on the other side.
1
1
Share

How to Reset the Tire Pressure on a Porsche Macan?

Press the MENU button on the right-hand combination switch on the steering wheel with the ignition on to bring up the system settings main menu, and select Tire Pressure; Select the Settings option; Choose the tire - Winter tires "20Inch" (20 inches); Select "Sparewheel" (spare tire), "Sealingset" (tire repair setting); The instrument panel will display a prompt (confirm the tire repair setting), select "Yes" to successfully set the tire pressure.
1
1
Share

How to Deal with Flood-Damaged Total Loss Vehicles?

For losses caused by natural disasters such as heavy rain and floods, insurance companies will compensate according to the agreement; If a car is damaged by flooding while parked in a residential area or underground garage, the insurance company will compensate for it as a natural disaster. If the vehicle is waterlogged but the engine is not flooded, and only parts replacement or circuit repairs are needed, this falls under the coverage of the vehicle damage insurance.
15
0
Share

How to Improve Hard Car Suspension?

Methods to improve hard car suspension: 1. Reduce tire pressure - lowering tire pressure can help improve ride comfort to some extent, but be careful not to reduce it too much as this may damage the tires and pose safety risks to passengers; 2. Adjust or replace shock absorbers - consult professionals about replacing with softer shock absorbers where modifications are permitted, with coilover shock absorbers being a common option; 3. Use seat cushions - the direct effect of hard suspension is bumpy and uncomfortable rides, so using car seat cushions can help alleviate this to some degree.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.