What are the precautions for using cars in winter?

1 Answers
ReidLynn
07/30/25 8:47am
Precautions for using cars in winter include replacing winter tires, adding or replacing antifreeze, and selecting suitable engine oil. The specific precautions are as follows: Replacing winter tires: As the temperature drops, the surface of the tires becomes stiff, which can affect the grip performance of the tires. In some cases, this may lead to slipping, especially in northeastern regions where rain and snow are frequent, making road conditions worse. Additionally, due to the effect of thermal expansion and contraction, tire pressure will also decrease. Adding or replacing antifreeze: Antifreeze has two main functions. In summer, when temperatures are higher, antifreeze ensures the normal operation of the car's cooling system, preventing the engine from overheating. In winter, it prevents excessively low temperatures from freezing and damaging engine cylinders and other components. Selecting suitable engine oil: Similarly, due to the drop in temperature, if the cold-start engine oil is too thick in winter, it can affect car starting and increase engine wear. On the other hand, if the hot engine oil is too thin, it can reduce lubrication and sealing performance.
Was this review help?
15
1
Share
More Forum Discussions

How Long is the Driving Test Valid? How is the Time Calculated?

The validity period of the study permit for driving is calculated from the date of passing the subject one test, not from the date of application. After completing the subject one test, you should pass the subject two and subject three tests within three years. If you fail to do so, the previously passed subjects will become invalid.
13
3
Share

How to Transfer Driving License Points?

A copy of ID card, two latest one-inch color photos without hats, and fill in the "Motor Vehicle Driving License Application Form". Approved by the business leadership post, the clerk unseals the file and checks whether the file data is complete and valid. After passing the road driving re-examination, the transfer procedures will be processed, and the "Motor Vehicle Driving License Application Form" in the original driving license file will be retained.
16
5
Share

How to Operate Gear Shifting in Subject 3 Driving Test?

After starting with first gear, appropriately press the accelerator to increase speed before upshifting. Accelerate to 15~20 km/h to shift into second gear, and release the accelerator pedal during gear shifting. Press the clutch pedal, then push the gear lever into second gear, and slowly release the clutch while gradually pressing the accelerator pedal to continue driving. When downshifting, release the accelerator pedal, press the clutch pedal, push the gear lever into a lower gear, and then slowly lift the clutch until the left foot completely releases the clutch.
19
3
Share

How to Adjust the Focus Audio System?

First, reset all additional functions of the car's main unit to factory settings. Then, set the treble, midrange, and bass to the middle position, and do the same for the left-right balance. Set the amplifier's volume to the lowest level, FILTER to OFF4, and CROSSOVER to the lowest 5. For main unit debugging, play some high-fidelity vocal discs or discs with strong bass dynamics, and adjust the volume to slightly over half or 3/5 of the maximum level.
20
4
Share

How to handle the renewal of a delayed driver's license?

You can normally process the driver's license, but you cannot drive on the road before renewal. Bring relevant documents to the DMV for processing. It belongs to the category of 'revocable cancellation,' but you cannot drive on the road before renewal. Driving eligibility can be restored after passing the subject one exam. The driver's license will be automatically canceled by the system, and you can only reapply and retake the driver's license with complete documents.
9
5
Share

Is It Easy to Obtain a Class 3 Automotive Repair License?

Class 3 vehicle repair application conditions relate to personnel requirements, equipment requirements, area requirements, and business scope requirements, all of which must comply with the 'Automotive Repair Business Establishment Conditions' to apply. According to the newly promulgated national standard 'Automotive Repair Business Establishment Conditions,' automotive repair shops are classified into Class 1, Class 2, and Class 3 repair enterprises. Each type of repair enterprise has corresponding requirements for premises, technical management personnel, technicians, and specialized repair equipment and tools. Personnel requirements: The number of personnel engaged in vehicle repair must be sufficient, with no fewer than two inspectors, no fewer than two engine repair specialists, and they must possess qualification certificates issued by the competent authorities, requiring certification for the job. The technical person in charge should have a diploma in vehicle repair or related majors from a college or above, or a technical title at the intermediate level or above in relevant skills. Area requirements: The reception area must not be less than 20 square meters; the parking area must not be less than 30 square meters; the production workshop must not be less than 120 square meters. Equipment requirements: The working equipment should include: electric welding and gas shielded welding equipment, gas welding equipment, press, vehicle exterior cleaning machine, grinding and polishing equipment, profile cutting machine, body correction system, paint mixing equipment, dust and dirt removal equipment, etc.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.