What Are the Precautions for Turning a Car?

3 Answers
Talia
07/24/25 2:30am
Here are four key precautions for turning a car: 1. Use turn signals: Always activate your turn signals when turning; otherwise, drivers behind you may misjudge your actions, leading to unnecessary accidents or injuries. 2. Avoid sudden steering: Reduce speed when turning and steer smoothly to prevent skidding caused by excessive centrifugal force. 3. Do not coast into turns: In neutral gear, the engine cannot regulate wheel speed, causing the car to move solely by inertia. This significantly reduces the effectiveness of braking and steering, increasing safety risks. 4. Take wide left turns: To avoid obstruction or collision, turn as far as possible toward the intended direction.
Was this review help?
13
5
Share
Coleman
08/10/25 9:36pm
I always think turning requires special attention because if the speed is too fast or not handled properly, the car can easily lose control and drift out of the lane. I personally prefer to start slowing down in advance, signaling with the turn indicator at least 30 meters before to indicate the direction, letting others know my intention. Then I carefully check the rearview mirror and both sides to ensure no pedestrians or bicycles are approaching, especially in urban areas where electric scooters popping up is all too common. When turning, the steering wheel should be turned smoothly, not abruptly, to maintain stability and prevent passengers in the back from getting carsick. On rainy days when the road is slippery, it's even more important to control the speed to avoid skidding and accidents. After completing the turn, accelerate cautiously to avoid hitting roadside stones or obstacles. Turning is a fundamental driving skill; mastering it makes the entire driving experience safer and smoother. These principles also apply when driving at night with poor lighting conditions.
Was this review help?
14
4
Share
Expand All
StGeorge
09/24/25 4:13am
Every time I make a turn, I pay extra attention to speed management. Going too fast can cause the car to deviate from the path, leading to danger. My method is to first signal with the turn indicator to alert the vehicles behind, then slow down to a comfortable and safe speed. After that, I check my surroundings, especially the blind spots, to ensure no pedestrians or vehicles suddenly appear. The turning motion should be smooth—avoid sharp turns or sudden steering wheel movements, as this can make passengers in the back complain of dizziness. Adjust flexibly under different road conditions; for example, take sharp curves in suburban areas at an even lower speed. After completing the turn, I gently press the accelerator to regain speed while preventing accidental collisions. Having driven for many years, I’ve learned from experience: whether turning left or right, always keep an eye on pedestrian movements. With so many shared bikes around now, a moment of carelessness can lead to trouble. Stronger safety awareness brings more peace of mind for myself and my family.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Remove the Honda Lingpai Wiper?

The method for removing the Lingpai wiper is as follows: 1. Lift the wiper arm from the windshield. 2. Then press and hold the wiper lock pin to release it. 3. Finally, slide the wiper along the wiper arm to remove it. Maintenance methods for the Lingpai wiper: 1. Replace the wiper blade when it hardens. If the wiper works well during heavy rain but leaves uneven streaks when used in light rain, affecting visibility, this indicates the wiper blade has hardened. 2. Replace the wiper arm when the spring tension weakens. The wiper blade relies on the spring tension of the wiper arm to maintain close contact with the windshield. If the spring tension weakens, the wiper may lift due to strong wind pressure on the windshield at high speeds, especially noticeable with longer wipers, leaving parts of the glass uncleaned. This is commonly referred to as wiper lift during driving, and it is best to replace the wiper arm in such cases. 3. In some situations, such as when the wiper causes a foggy, water-beaded, streaky, or partially blurred windshield, this is due to oil film, dirt, or wax buildup. Simply cleaning the windshield and wiper blade will resolve the issue.
17
3
Share

What Causes Compressor Failure?

Compressor failure is caused by liquid slugging, oil shortage, and insufficient lubrication. Below is an analysis of compressor damage: 1. Liquid Slugging: A phenomenon where liquid refrigerant and lubricating oil are drawn into the compressor cylinder along with gas, damaging the suction valve plates. Reducing or preventing liquid from entering the cylinder can avoid liquid slugging, making it entirely preventable. 2. Oil Shortage and Insufficient Lubrication: The compressor is a high-speed, complex machine. Ensuring adequate lubrication of moving parts such as the crankshaft, bearings, connecting rods, and pistons is a basic requirement for maintaining normal operation.
3
5
Share

No Sound When Navigation is Connected to Car Bluetooth?

Phone call volume is not turned on. The volume of the car navigation system is not activated. Below is an analysis of why there is no sound when navigation is connected to car Bluetooth: 1. Solution: Go to the phone's Bluetooth settings, click the gear icon next to the paired device, and turn on "Call Audio" and "Media Audio." 2. Reason: This might be because when you got in the car, your phone's volume needed to be turned on again. Often, it automatically resets to 0, so naturally, there's no sound. Gradually increase the volume a little, and you'll know if there's sound.
1
4
Share

What number to call when a car is blocking the entrance?

Call 110 or 122, the traffic police hotline. Below is the analysis of making the call: 1. Procedure: Directly dial 110 or 122 to report to the police, provide the license plate number of the vehicle, and the traffic police will help you contact the owner to request moving the car. 2. Reason: By calling 110 or 122 and informing the operator that your car is blocked by a certain license plate number at a specific location, the traffic police will quickly contact the owner to move the vehicle. The traffic police indicate that upon receiving a request for vehicle removal, 110 will first notify the local traffic police department, which will then inform the squadron to contact the owner.
2
0
Share

Is the Honda Inspire's engine the same as the Accord's?

Honda Inspire shares the same engine with the Accord, both equipped with a 1.5T turbocharged engine, along with identical chassis and transmission. Below are some key details about the Inspire: 1. Stylistically, the Inspire leans more towards a sporty aesthetic compared to the Accord. This is evident from the bold grille design on both sides of the front fascia, featuring more expressive elements, while chrome accents further enhance its muscular appeal. 2. The side profile showcases sharp lines complemented by a fastback-style roofline and large stylish wheels, giving it a strong coupe-like presence. At the rear, the distinctive "boomerang"-shaped taillights offer excellent visual impact when illuminated. The most eye-catching feature is the dual exhaust setup, which adds a bold and dynamic touch. 3. The 8-inch freestanding LCD display on the dashboard adopts a physical button layout, offering a clean interface and responsive operation for easy usability. Additionally, the new model comes with built-in AutoNavi maps, enhancing the accuracy of its onboard navigation system.
13
4
Share

What is the fuel consumption per 100 kilometers for a 2.0T car?

2.0T version engines have a combined fuel consumption of around 11L per 100 kilometers. The following is an analysis of the combined fuel consumption for 2.0T engines per 100 kilometers: 1. Different models: The fuel consumption of 2.0T engines is influenced by factors such as the vehicle model, driving conditions, transmission technology, and driving habits, resulting in varying fuel consumption for each user. 2. Reasons: The BMW B48 2.0T version engine is developed based on BMW's B platform, representing a brand-new inline 4-cylinder engine. The Volkswagen EA888 2.0T version engine was introduced back in 2011, and the fourth-generation 2.0T version engine utilizes a dual-cycle switching system, with a compression ratio increased to 11.7:1 and a thermal efficiency as high as 38%.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.