What are the precautions for tire maintenance?

1 Answers
DanielDella
07/29/25 11:38am
Tire maintenance precautions include: 1. Avoid sudden acceleration or deceleration when using new tires, and avoid excessive steering, as these actions can shorten the tire's lifespan; 2. Pay attention to tire cleanliness; 3. Develop a good habit of checking the tire's appearance before driving; 4. Remember to inflate the tire when the tire pressure is insufficient. Tire care precautions include: 1. Maintain a safe distance when driving at high speeds to avoid unnecessary or frequent braking, which can reduce tire damage; 2. Rotate the tires on the vehicle appropriately and timely to ensure even tire wear; 3. Use tires with vertical tread patterns for the front wheels and tires with horizontal tread patterns for the rear wheels whenever possible; 4. Replace the tires when the wear reaches the tread wear indicators.
Was this review help?
19
3
Share
More Forum Discussions

What is the fuel consumption of the Vios Bear?

The comprehensive fuel consumption of the Vios is 4.9-5.1L/100km. There are a total of 6 Vios models currently on sale: the CVT Chuangxing CARE Edition, CVT Chuangxing Edition, CVT Zhixing Edition, and CVT Shuxing Edition, with a comprehensive fuel consumption of 4.9L/100km. The manual Qianxing Edition and manual Chuangxing Edition have a comprehensive fuel consumption of 5.1L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.1-7.0L/100km. Specific factors affecting a car's fuel consumption are as follows: Vehicle weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV weighing about 1.5 tons consumes around 8.5 liters. Different weights result in varying fuel consumption. Drag coefficient: Higher drag coefficients increase fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, leading to reduced fuel consumption. Optimal engine speed: During operation, the engine has a most economical torque output point. Maintaining the car's speed within this torque output range can significantly reduce fuel consumption. Typically, small-displacement cars achieve this at about 70 km/h, while larger-displacement cars reach it at around 100 km/h. Staying within this optimal speed range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption.
14
4
Share

What does the God's Eye 540-degree transparent chassis mean?

God's Eye 540-degree transparent chassis refers to a technology that allows visibility of all surroundings of the vehicle. Below are the relevant details: 1. Models equipped with this feature: BYD Song Pro, Land Rover Range Rover, Geely ICON. 2. Features: The configured touch screen enables switching between various viewing angles, assisting drivers in more comprehensively identifying potential safety hazards on the road. If the vehicle is driving on rough terrain, the transparent chassis allows the driver to clearly observe the position of the tires, enabling immediate avoidance of obstacles such as uneven road surfaces and rocks, thereby preventing situations like tire sinking or chassis scraping that could harm the vehicle.
18
3
Share

Where is the reset button for the Geely Emgrand center control screen?

In the center control screen. Here are detailed introductions about the Geely Emgrand: 1. Overview: The Geely Emgrand is a compact car under Geely, with dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. The Emgrand EC718 and EC718-RV are the first B-segment sedans from Geely, available in three-box and two-box versions respectively. 2. Configuration: The Geely Emgrand features a MacPherson independent front suspension and a torsion beam non-independent rear suspension, with front-wheel drive. It is equipped with a 1.5L naturally aspirated engine and a 1.3T turbocharged engine, paired with a CVT transmission.
14
0
Share

What does the M gear in Tayron mean?

Tayron's M gear is the manual mode in automatic transmission models. Here are some extended details: 1. Overtaking: By switching to manual M gear and downshifting to 1st gear, you can achieve faster overtaking, which is more effective than pressing the accelerator deeply in D gear. 2. Uphill: If you are in D gear uphill, the car may not necessarily lock in 1st gear, as the computer determines gear shifting based on the vehicle's current speed. By locking in 1st or 2nd gear with M gear, the vehicle will handle uphill much easier. 3. Downhill: When encountering a long and steep downhill slope, switch to M gear and adjust to 1st or 2nd gear to utilize the engine's braking effect, reducing the pressure on the brake pads. Prolonged braking in D gear downhill can cause the brake pads and wheel hubs to overheat, not only affecting the lifespan of the components but also potentially leading to complete loss of braking efficiency and safety accidents in severe cases.
8
3
Share

Does the Crown Land Cruiser have a five-seat version?

The lowest configuration offers one five-seat variant, but production allocation is very limited. Below are details about the Crown Land Cruiser: 1. Powertrain: The Crown Land Cruiser is equipped with a hybrid system combining a 2.5L engine and electric motor. This powertrain delivers a maximum power output of 183kW, with the engine producing 192Ps and the motor generating 182Ps. 2. Exterior: Positioned as a midsize SUV, the Crown Land Cruiser adopts an all-new design language. It features the sporty Highlander design language from the U.S. market, with a hexagonal front grille that has been blacked out. The classic Crown emblem is prominently placed, enhancing both premium appeal and nostalgia. Additionally, the front fascia incorporates sharp LED headlights and aggressive lines for a more striking visual presence.
3
0
Share

What Are the Reasons Why a Lift Truck Cannot Ascend?

The reasons why a lift truck cannot ascend are as follows: 1. Overload: Each lift truck has its own rated load capacity. Once overloaded, it may exhibit weak lifting or fail to ascend. The Shuangli hydraulic lift platform reminds users to appropriately reduce the load. 2. The return oil valve is not closed: Tighten the return oil valve. 3. The manual pump check valve is stuck: The return mechanism fails. Shuangli lifting machinery suggests unscrewing the oil pump valve port bolt, inspecting, cleaning, and replacing with clean hydraulic oil. 4. The gear pump is damaged: The discharged oil lacks pressure. Replace the gear pump. 5. Insufficient hydraulic oil: The Shuangli hydraulic lift platform can be refilled with sufficient hydraulic oil.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.