What are the precautions for the first charging of BYD Han?

1 Answers
VanAllie
07/29/25 10:38pm
BYD Han charging precautions are as follows: 1. Charge daily: This keeps the battery in a shallow cycle state, extending battery life. 2. Control charging time and frequency: Overcharging, over-discharging, and insufficient charging will shorten battery life. Properly manage charging time and frequency to avoid battery damage. 3. Avoid plug overheating during charging: Prolonged overheating may cause plug short circuits or poor contact, damaging both charger and battery. Clean oxides promptly or replace connectors when necessary. 4. Avoid vibration and maintain ventilation: Always follow the manual's instructions for charger protection. Protect the charger from vibration and bumps. Maintain proper ventilation during charging, as poor ventilation not only affects charger lifespan but also charging status, potentially damaging the battery. 5. Periodic deep discharge: Performing a regular deep discharge helps "activate" the battery and improves its capacity.
Was this review help?
7
1
Share
More Forum Discussions

What Causes a Manual Transmission Gear Lever to Become Stuck?

Manual transmission gear lever becoming stuck can be due to clutch failure, deformed transmission plates, or excessive gear self-locking force. Smooth gear shifting requires matching the appropriate gear with the corresponding vehicle speed and engine RPM. While manual transmission vehicles can use the clutch to mitigate jerking caused by downshifting at high speeds, prolonged use of this practice can easily damage the clutch. Below are detailed explanations of the specific causes: Clutch failure: Clutch failure may result in insufficient clutch disengagement travel. In such cases, it is recommended to visit a repair shop to adjust the disengagement travel. Deformed transmission plates: Deformation of the transmission plates in the clutch pressure plate assembly, due to certain reasons, can lead to poor disengagement. In this situation, it is advisable to replace the pressure plate with a high-quality one that matches the original vehicle specifications. Excessive gear self-locking force: Excessive self-locking force in the clutch gears can cause this issue. It is recommended to visit a repair shop to adjust the clutch cable and gear stop lock accordingly.
14
5
Share

What is the Driver's License Inspection Period?

Driver's license inspection period refers to the annual review required for a driver's license once a year. According to Article 70, Section 2, Chapter 5 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the annual review period varies for drivers under different circumstances. The driver's license inspection date is determined based on Article 35, Chapter 5 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses." Motor vehicle drivers should apply for a license renewal at the vehicle management office where the license was issued within 90 days before the expiration of their driver's license. Documents required for the annual driver's license inspection include the original copy of the driver's license, ID card, and the motor vehicle driver's physical condition certificate. If the driver's license is overdue for an annual inspection within one year, it will not be canceled. The annual inspection can be conducted within one year without incurring a fine. According to Article 67, Section 7, Chapter 5 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security, if a driver fails to renew their license for more than one year after its expiration, the vehicle management office should revoke their motor vehicle driver's license.
13
1
Share

Is it reasonable to park a manual transmission car in first gear after turning off the engine?

Parking a manual transmission car in first gear after turning off the engine is unreasonable. If the car is parked in first gear with the engine off, external forces can suddenly impact the vehicle, and the energy from the interaction between the ground and the tires can be transmitted back through the drivetrain, ultimately causing the engine to be dragged. Below are the hazards of parking in first gear with the engine off: It can damage the gears inside the engine: The only difference is that the engine has no output. Such sudden and strong force can easily damage the internal gears of the engine. It can harm the transmission: If the car is left in gear after parking, there is a risk that the driver may forget to press the clutch when starting the car next time, causing the vehicle to lurch forward suddenly. This is dangerous and can also damage the transmission gears. Transmissions are designed to operate in a neutral free state, where the resistance to moving into any gear is roughly the same. Some shift linkages use cable designs, and if left in a particular gear for extended periods, it can cause prolonged stress in one direction, affecting the lifespan of the components.
4
0
Share

Where is the Neutral Gear in a Manual Transmission Car?

Manual transmission neutral gear is located in the middle position of the gear lever without letter identification. Most manual transmission models have gears divided into 1~5 gears, R gear, and neutral gear. Here are the relevant introductions: 1. Gears: 1~5 gears are forward gears, and R is the reverse gear. Normally: 1st gear is at the upper left; 2nd gear is at the lower left; 3rd gear is at the upper center; 4th gear is at the lower center; 5th gear is at the upper right; R gear is at the lower right; neutral gear is in the exact center. Be sure to check carefully in advance to prevent accidents caused by shifting into the wrong gear. 2. Speed range: 1st gear: speed range is 0KM~15KM. 2nd gear: speed range is 10KM~25KM. 3rd gear: speed range is 20KM~45KM. 4th gear: speed range is 40KM~60KM. 5th gear: speed range is above 60KM.
7
2
Share

How to Replace the Gear Knob on a Cruze?

To remove the gear knob, most manual transmission models have the gear knob screwed on. Remove the fixing screw and rotate the gear knob counterclockwise to take it off. Some models have the gear knob connected with the dust cover. In this case, you need to loosen the dust cover first and pry it out with a trim panel tool. Install the new fixing bolt. Since this is not an OEM gear knob replacement, you need to install the included fixing bolt.
14
4
Share

Can manual transmission shift up or down by skipping gears?

Manual transmission cars cannot skip gears when shifting up. It is important to reduce to an appropriate speed before shifting. Below are the precautions for shifting with a manual transmission: When downshifting from a higher gear: Generally, you should release the accelerator pedal and coast to a lower speed or brake to a lower speed before shifting to a lower gear. If you shift at too low a speed, the engine may not provide sufficient power, which can cause noticeable body shaking, prolong the shifting time, or even stall the engine. Shift up sequentially; skipping gears when shifting up can lead to discontinuous power delivery and cause the car to stall. However, downshifting can be done by skipping gears, and it is often necessary to downshift by skipping gears. When upshifting from a lower gear: You should shift up sequentially and avoid "skipping gears." Skipping gears prolongs the shifting time, reduces the car's power performance, and increases wear on the synchronizer. Additionally, looking down while shifting can cause you to collide with the car in front. Especially when driving in urban streets or at high speeds, looking down while shifting can cause the car to veer off course and lead to an accident.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.