What are the precautions for the break-in period of a new xrv?

2 Answers
VonRhett
07/29/25 12:56pm
Precautions for the break-in period of a new xrv: 1. Avoid emergency braking: It can easily damage the braking system during the break-in period and increase the impact on the engine and transmission. 2. Do not drive at high speeds: It is not recommended to press the accelerator pedal all the way down, as it can easily damage the engine. It is best to keep the engine speed below 3000r/min. 3. Do not overload: Increased load will raise fuel consumption, and high-intensity pressure will accelerate the wear of mechanical parts. The load should not exceed 70% of the specified capacity. 4. Use high-quality fuel: High-quality fuel provides sufficient power, while low-quality fuel can cause certain damage to the car. 5. Preheat before cold start: When starting the car, the engine temperature is low, and the lubricating oil has not yet reached all parts, which can lead to dry friction of components. The preheating time does not need to be too long; start the car once it reaches the operating temperature.
Was this review help?
15
4
Share
LauraDella
08/14/25 1:54am
I've been driving cars for a while and found that the break-in period for a new car is crucial for engine longevity. Remember not to speed right away; keep it under 80 km/h. Start smoothly, avoid slamming the accelerator or braking hard, and try to keep the RPM below 3000. Don’t overload the car for long trips—drive about 1000 km first to let the internal engine parts gradually adapt. Check the oil level and cooling system frequently to prevent leaks or overheating. During the break-in period, also pay attention to tire pressure—don’t inflate it too high to avoid extra wear. In short, be patient and drive gently. This will make the car more fuel-efficient, have fewer issues, and be more reliable in the future. A new car is like a newborn calf—it needs careful attention, so don’t rush things. These habits can extend the car’s major maintenance cycle, saving you money and hassle.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What engine is equipped in the Lynk & Co 02?

The engine equipped in the Lynk & Co 02 varies depending on the model: 1. The manual Pure Lite, Jin Plus, Yao Plus, DCT Jin Champion Edition, front-wheel-drive Jin Pro, DCT Yao Champion Edition, and front-wheel-drive Yao Pro are equipped with a 1.5L turbocharged engine; 2. The front-wheel-drive Jin Champion Edition, automatic Yao Champion Edition, and all-wheel-drive Jin Pro are equipped with a 2.0L turbocharged engine. Taking the 2021 Lynk & Co 02 Pure Lite as an example, it belongs to the compact SUV category, with body dimensions of: length 4448mm, width 1890mm, height 1528mm, and a wheelbase of 2702mm.
18
3
Share

How to Turn Off the Start-Stop Function in Toyota Highlander?

Toyota Highlander's start-stop function can be turned off by pressing the start-stop cancel button located on the left side of the steering wheel, and the dashboard will display accordingly. The Toyota Highlander is a mid-size SUV. Taking the 2018 Toyota Highlander 5-seat two-wheel-drive Elite Edition as an example, its body dimensions are: length 4890mm, width 1925mm, height 1715mm, with a wheelbase of 2790mm. The 2018 Toyota Highlander 5-seat two-wheel-drive Elite Edition is equipped with a 2.0L turbocharged engine, paired with a 6-speed automatic transmission, and its suspension system adopts a MacPherson independent front suspension and an E-type multi-link independent rear suspension.
7
1
Share

What does car bar mean?

Car bar refers to the unit of measurement for tire pressure in megapascals (MPa). Both excessively high and low tire pressure can affect the lifespan of the tires. The impacts of high tire pressure include: 1. Reduced friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, decreasing driving comfort; 3. Accelerated wear on the central tread pattern; 4. Increased body vibration. The effects of low tire pressure are: 1. Increased friction coefficient with the road surface; 2. Heavier steering wheel and tendency to deviate; 3. Increased movement in various parts of the tire, causing abnormal heat due to excessive rolling; 4. Reduced functionality of the cords and rubber, leading to delamination or cord breakage.
2
1
Share

What is the reason why the Beetle key cannot be turned and the engine cannot be shut off?

Beetle key cannot be turned and the engine cannot be shut off may be due to a damaged ignition switch. Relevant information about the Beetle is as follows: 1. Exterior: Large panoramic sliding sunroof, various aluminum alloy wheels, up to 12 body colors. 2. Interior: Speakers with LED light strips, experience the authentic Beetle style inside, fabric floor mats with Beetle logo, welcome sill trim with Beetle logo, Vienna-perfected leather sport seats. 3. Powertrain: Equipped with direct-injection turbocharged system across the lineup. 4. Technology: Front seat and front window glass cleaning, RCD510 sound system, 10-channel high-quality Fender sound system, dual-zone Climatronic automatic climate control.
12
2
Share

What are the reasons for the weak acceleration and starting performance of the JAC M3?

Specific reasons are introduced as follows: 1. Poor fuel quality: The use of low-quality fuel in the car can also affect the service life of the exhaust system's three-way catalytic converter. If the three-way catalytic converter is clogged, it will directly impact the vehicle's acceleration performance and also lead to increased fuel consumption, resulting in weak acceleration. It is recommended to refuel at nationally certified gas stations to ensure the fuel meets the vehicle's standards and avoid refueling at unlicensed stations. 2. Check the intake system: When experiencing weak acceleration, the first step is to determine if the intake system is intact. If it is, consider whether the intake system needs cleaning. Remove the air filter and blow out the dust. If it is difficult to clean, replace it. Check if the throttle body is clean, and further inspect the intake valve and intake manifold, performing appropriate cleaning if necessary.
19
3
Share

Where is the airbag control module located in the JAC Refine S3?

The airbag control module is generally located in front of the gear shift lever or underneath it. Areas marked with AIR-BAG in the vehicle indicate airbag locations. Below is relevant information: 1. Airbags: The airbag system is a passive safety (see vehicle safety performance) protection system. When used in conjunction with seat belts, it provides effective collision protection for occupants. 2. Airbag working principle: When a collision occurs during vehicle operation, the airbag sensors first receive the impact signal. Once the impact reaches the specified intensity, the sensors activate and send a signal to the electronic control unit. After receiving the signal, the electronic control unit compares it with its pre-stored data. If the airbag deployment conditions are met, the drive circuit sends an activation signal to the gas generator in the airbag assembly.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.