···
Log in / Register

What are the precautions for Subject 2 of the driving test?

4 Answers
GideonLee
07/29/25 6:44pm

Precautions for Subject 2 of the driving test include learning to relax during the waiting process. During the test, pay attention to points and lines, etc. Below are some introductions about the precautions for Subject 2: 1. Relax your mind: The longer you wait for the test, the more nervous you may become. You can chat with people around you to relieve stress. During the test, after preparing, take a deep breath, then think about the skills and methods taught by the coach, and carefully observe the points to complete the five items. 2. Precautions: During the test, pay attention to points and lines. Get in the car, adjust the seat, fasten the seat belt, adjust the left and right rearview mirrors, and feel the sensitivity of the clutch to know how to press the clutch during the test. Recall the details taught by the coach and practiced during usual times.

Was this review help?
18
5
Share
WestonLee
08/14/25 12:11pm

The key to passing the driving test (Subject 2) lies in mastering the basics and paying attention to details. I always advise students to prepare thoroughly and practice reversing into the garage and parallel parking more through simulations. Before driving, it's important to check the rearview mirrors and seat position, and to get accustomed to the clutch feel of the car. During the test, stay relaxed—nervousness often leads to mistakes, like many failing because they drove too fast and crossed the line. Remember to bring your ID and appointment confirmation, and arrive early to familiarize yourself with the test environment. When stopping on the slope, do it slowly and steadily to avoid stalling or rolling back. Follow the standards taught by your instructor for every move, and don't make last-minute changes. Practice for a few more weeks, memorize the key points, and you'll be fine.

Was this review help?
16
3
Share
Expand All
StPaisley
10/14/25 7:50am

I just passed the second driving test not long ago, and I feel the biggest trick is to practice more and adjust your mindset. When practicing, master reversing and parallel parking until they become second nature, so you can perform them habitually during the test. For reversing into the parking space, make sure your reference points are accurate, and don’t hesitate when turning the steering wheel back, or it might go off track. For hill starts, remember to use the handbrake and release it steadily without rushing. Wear flat shoes for easier clutch control. On the test day, arrive early to queue up for a practice run on the course—being familiar with the layout will boost your confidence. Bring a water bottle to stay hydrated while waiting, as a dry mouth might affect your performance. If you make a mistake, don’t get discouraged—there’s always a chance to retake the test.

Was this review help?
16
1
Share
Expand All
DiMicah
11/27/25 8:45am

Safety comes first in the driving test's Subject 2, and every action must be standardized. Before getting in the car, check that the rearview mirrors are properly adjusted. Pay attention to ensure there are no people or obstacles around when reversing. Control the vehicle speed within a slow range to avoid accidents. A stable mindset is key; rushing can easily lead to running a red light or crossing the line. Follow the examiner's instructions and do not act on your own. Familiarize yourself with the rules and reference points during regular practice. Bring all required documents and arrive on time for the test. Take a deep breath and relax before starting. Ensure the clutch and brake are coordinated properly.

Was this review help?
19
3
Share
Expand All
More Forum Discussions

What Causes the Clunking Sound When Releasing the Clutch in a Manual Transmission?

It may be caused by loose friction plates on the steel plates or impact noise between the release levers and the window holes. Extended information is as follows: 1. Metal impact sounds require immediate inspection: If the clutch makes a "click" or "clunk" metal impact sound when engaging or disengaging, especially more noticeable when starting with a heavy load, it should be inspected or replaced. 2. Collision sounds require immediate inspection: If a "clatter" impact sound is heard, this is due to loose friction plates on the steel plates or impact noise between the release levers and the window holes, and should be inspected promptly. 3. Sharp squealing sounds require immediate inspection: If a sharp squealing sound is heard just before the clutch engages, which disappears when the pedal is pressed and reappears when released, this is caused by broken steel plates of the driven disc or exposed rivet heads scraping against the pressure plate or flywheel, and should be inspected. 4. Jerking sounds require immediate inspection: If the clutch pedal is released very slowly and the vehicle jerks forward with a "thud" sound, this is due to sudden engagement of the driving and driven parts. The reasons come from two aspects: First, deformation of the driven disc or oil contamination on the friction lining causing abrupt clutch engagement leading to jerking; Second, stiffness in the linkage system causing the pressure plate to suddenly press against the driven disc, resulting in jerking.
20
4
Share

What is the ratio of 25:1 for gasoline and engine oil?

25:1 means mixing 25 parts of gasoline with 1 part of engine oil. Here are the details: 1. Engine oil: It is the lubricating oil for the engine, which can lubricate the engine, reduce friction, assist cooling, and minimize buffering. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives improve and compensate for the shortcomings of the base oil. Using lubricating oil can reduce wear on engine components and extend their service life. Engine oils in the market are divided into synthetic oil and mineral oil, with synthetic oil further categorized into full synthetic oil and semi-synthetic oil. Generally, the replacement cycle for full synthetic oil in cars is longer than that for semi-synthetic oil and mineral oil. Drivers can choose the type of oil based on their driving conditions. The ratio of engine oil to gasoline can also be adjusted according to needs. 2. Gasoline: It is a volatile and flammable liquid hydrocarbon mixture obtained from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, with a distillation range of 30°C to 220°C. Its main components are C5 to C12 aliphatic hydrocarbons and naphthenes, along with a certain amount of aromatic hydrocarbons. Gasoline has a high octane number, providing strong anti-knock combustion performance.
15
5
Share

What to Do When Unable to Exit the Highway?

In the event of being unable to exit the highway, you can seek assistance from the highway management department staff. Here are the relevant details: 1. Unable to exit due to blizzard: Affected by blizzards, multiple provinces and regions may close highways. Some drivers traveling on highways may not receive timely notifications, resulting in being stranded and unable to exit. In such cases, drivers can consult the highway management department on how to exit. 2. Unable to exit due to accident-related highway closure: Drivers can rest at service areas until the highway reopens. They may also call the national highway rescue hotline 12122 to consult with highway traffic management authorities or check the highway closure status via the China Highway Network.
15
0
Share

Worried About Failing the Driver's License Test? Here's What to Do

Practice diligently during training and maintain a calm mindset during the exam to overcome your fears. Below is detailed information about obtaining a driver's license: 1. Overview: The full name of a driver's license is a motor vehicle driving license, also known as a "driver's license." It is a certificate required by law for motor vehicle drivers. In China, driver's licenses are divided into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Importance: Driving a motor vehicle requires certain skills. Without these skills, driving recklessly can lead to traffic accidents. Generally, driving without a license is not allowed. Therefore, it is essential to practice extensively when preparing for the driver's license test. Before driving on the road, it is crucial to master the basic functions of the vehicle.
15
1
Share

What Are the Causes of Abnormal Noise in a Manual Transmission?

Manual transmission may produce abnormal noise due to excessive or insufficient gear meshing clearance, poor gear meshing, low or deteriorated transmission oil level. Below is a detailed introduction to the causes of abnormal noise in manual transmissions: 1. Excessive or insufficient gear meshing clearance: When the meshing clearance is too large, the driving gear impacts the driven gear during rotation, producing a knocking sound. This noise usually worsens as the transmission temperature increases. When the meshing clearance is too small, the abnormal noise is typically continuous, and the faster the vehicle speed, the more severe the noise becomes, often causing the transmission lubricant to overheat. 2. Poor gear meshing: The abnormal noise from the transmission may be caused by the collision of gear tooth surfaces. This noise is uneven, and the greater the throttle, the louder the noise becomes. In severe cases, vibrations in the transmission can be felt.
9
4
Share

How to Check the Production Date of a Car from the Glass?

There are three methods to check the production date of the car glass: 1. Numbers and dots format: The number represents the year, and the dots represent the month. Dots in front of the number indicate the first half of the year, and the month can be calculated by subtracting the number of dots from 7. Dots behind the number indicate the second half of the year, and the month can be calculated by subtracting the number of dots from 13. 2. Numbers with large and small dots format: The number represents the year, small dots represent the quarter, and large dots represent the corresponding month in the quarter. 3. First line with numbers and small dots, second line with large and small dots format: The number represents the year of glass production, small dots in the first line represent the month of that year, and the second line represents the corresponding days of the month, where large dots represent 10 days and small dots represent 1 day.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.