···
Log in / Register

What are the precautions for Subject 2 driving test?

5 Answers
StAdelyn
07/29/25 9:02am

Precautions for Subject 2 driving test are as follows: 1. Right-angle turn: 1. Pass at idle speed: Pass in first gear at idle speed without accelerating. 2. Stay away from the protruding point: Before entering the right-angle turn, keep the car as far away from the protruding point as possible within the road lines on both sides. 3. Steer properly: When the center of the small triangular window on the front window on the side near the protruding point coincides with the protruding point, turn the steering wheel fully to the side of the protruding point. After the car head turns to the new direction, pay special attention not to let the right front wheel press the right side line of the road. 2. Curve driving: 1. Drive close to the edge line: After entering the curve, try to drive in a large circle. When driving to the right curve, keep the right wheel close to the right edge line of the road. 2. Keep the rearview mirror at the outer white line edge: During the curve, adjust the steering wheel to keep the small rearview mirror on the inner side of the car hood always at the edge of the outer white line, neither crossing the line nor staying too far from the edge line.

Was this review help?
13
0
Share
LaAnastasia
08/12/25 8:03am

Preparing for the Subject 2 test, I think maintaining a calm mindset is crucial. Before the exam, practice several laps at the driving school’s training area to familiarize yourself with the location of each item, such as where the points are for parallel parking. The more you practice, the better your feel will naturally become. Remember to arrive early on the test day, don’t be late, and bring your ID to check the vehicle. Adjust the seat and rearview mirrors to a comfortable position, and don’t overlook small details like whether the seatbelt is fastened. If your skills aren’t proficient, don’t hesitate to ask the instructor for key points. Psychologically, don’t be nervous; Subject 2 is just a basic road test, no big deal—just take a few deep breaths. Stay focused and complete each maneuver as you would during regular practice, without letting the examiner affect your mood. After passing, start slowly and drive steadily—that’s the way to go.

Was this review help?
19
0
Share
Expand All
DiMaria
10/06/25 3:14am

I'm thinking about the skills needed for the Subject 2 driving test. When reversing into the garage, keep your eyes on the reference points in the rearview mirror and turn the steering wheel to the designated position without overdoing it. For parallel parking, first turn on the indicator, then align with the edge line—getting too close to the curb risks crossing the line. During curve driving, turn the steering wheel gently, avoiding sudden movements. For hill starts, remember to use the handbrake and coordinate the clutch with the accelerator to prevent stalling. Familiarizing yourself with the test route is fundamental; run through it a few times in the practice area beforehand. Stay relaxed mentally—the examiner mainly checks for standardized movements and safety, so ignore distractions around you. If the car stalls, don’t panic; just restart and continue the test. Keep practicing until the movements become smooth, and your confidence will naturally build up.

Was this review help?
17
0
Share
Expand All
AdalynnMarie
11/19/25 4:42am

Taking the Subject 2 driving test, what I fear most is nervousness affecting my performance. Get enough sleep before the test and eat something in the morning to avoid being hungry. When you arrive at the test site, take slow deep breaths and don't be intimidated by the environment. Practice reversing and parking maneuvers more, remembering clear reference points, such as stopping when the rear wheels touch the line during reversing. Fasten your seatbelt securely and complete all actions in one go without dragging. If you make a mistake like stalling, don't blame yourself too much - the system may allow a retry. Treat the examiner with normal composure; they're assessing overall safe driving habits. With sufficient training time and solid fundamentals, it's not difficult - trust your abilities. The test is just assessing basic driving skills, nothing too serious.

Was this review help?
5
0
Share
Expand All
HadleyAnn
01/09/26 6:20am

I believe safety is the key focus of the Subject 2 driving test. First, adjust the seat and mirrors properly and fasten the seatbelt to ensure everything is comfortable. Use turn signals when maneuvering, and always check behind when reversing—don’t move blindly. During parallel parking, be careful not to let the wheels cross the boundary lines, and after starting on a slope, prevent the car from rolling back to avoid damage. Stay calm and avoid rushing to prevent speeding or hitting the poles. Familiarizing yourself with the test route is crucial—practicing multiple mock tests beforehand can minimize surprises. Don’t panic over minor mistakes like forgetting to reset something; the examiner might give a reminder. Throughout the process, strictly adhere to traffic rules, as safe driving is the ultimate goal. Strengthening these aspects during regular training will naturally lead to a smooth pass.

Was this review help?
13
5
Share
Expand All
More Forum Discussions

What Causes a Gasoline Car to Emit Black Smoke?

When a car emits black smoke, it is often due to uneven or excessive fuel supply from the high-pressure fuel pump across the cylinders. This can cause unstable engine speed and intermittent black smoke emissions. The issue should be addressed by adjusting the fuel supply to achieve balance or keep it within the specified range. Additionally, malfunctioning or damaged fuel injectors can lead to insufficient fuel atomization, resulting in black smoke. In such cases, the injectors need to be inspected and replaced. Below are the reasons and solutions for a car emitting black smoke: 1. Check if the air filter is clogged, if there is any leakage in the intake pipe (which may cause the engine to produce a sharp whistling sound under increased load), or if the turbocharger is damaged. 2. The solution involves inspecting whether the turbine wheel and compressor wheel blades are damaged and ensuring they rotate smoothly and flexibly.
1
4
Share

What is the ground clearance of the Zotye Z500?

The minimum ground clearance of the Zotye Z500 is 15cm. The Zotye Z500 is a mid-size car featuring a popular integrated lower grille design. The entire lineup is equipped with a 1.5-liter turbocharged engine, paired with either a 5-speed manual transmission or a CVT transmission. The front suspension of the Zotye Z500 utilizes a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The torsion beam suspension has a simple structure and occupies minimal space, allowing for expanded rear passenger space and trunk capacity.
12
3
Share

What brand of tires does the Boyue use?

The Boyue uses two types of tires. The mid-to-low trim models are equipped with Giti Comfort-SUV520 tires, while another option is the Cooper Discoverer-HTS tires. Both tires share the same size: 225/65-R18. Here are the details: 1. The Giti Comfort SUV520 is a high-performance SUV tire that balances handling, comfort, and safety. It features 3B stiffness balancing technology, combined with an optimized shoulder tread block and transverse groove configuration, ensuring even tread contact pressure distribution for improved handling stability and grip performance. The use of high-grip synthetic rubber with nano-reinforced carbon black and high-performance silica materials, along with four wide longitudinal grooves on the tread, effectively enhances wet braking performance, reduces braking distance, enables rapid water drainage at high speeds, and improves tire grip. 2. The Cooper Discoverer-HTS is a tire developed for mid-to-high-end urban SUV models and is the most affordable option in Cooper's urban SUV tire lineup. This tire emphasizes handling comfort and quiet performance, excelling in both handling and comfort/noise reduction, making it a well-balanced SUV tire.
13
1
Share

Why Does the Car Clutch Become Lower?

Reasons why a car clutch becomes lower: 1. There is air inside the clutch system, or leakage in the clutch master or slave cylinder; 2. The clutch cable is low, and there is an adjusting screw at the front end of the clutch cable—sometimes if it loosens, the clutch becomes lower; 3. The impact of a low car clutch: if adjusted too low, it can affect the separation gap, causing the car to start in a semi-clutch state, leading to clutch wear, and making gear shifting difficult. The clutch functions like a switch, engaging or disengaging power transmission. The clutch mechanism allows the driving and driven parts to temporarily separate and gradually engage, with the possibility of relative rotation during transmission. A rigid connection cannot be used between the driving and driven parts of the clutch.
8
1
Share

Reasons for Detected Misfire in Cylinder 4 (P0304)

p0304 detected misfire in cylinder 4 can be caused by the following reasons: 1. Spark Plug: Poor spark plug firing. 2. Piston Ring: Damaged piston rings leading to low cylinder pressure. 3. Ignition Coil: Internal damage to the ignition coil. 4. Timing Mechanism: Incorrect timing or skipped teeth in the timing mechanism. 5. Engine: Engine computer damage or fault code issues. The troubleshooting methods are: Check the cylinder pressure of each cylinder to ensure it is normal; most vehicles have a cylinder pressure of around 1300 kPa. Address any cylinders with abnormal pressure. Inspect the spark plug firing condition, the size of the free gap, whether the ceramic area has cracks, and if it has been punctured. Replace any damaged spark plugs. Check if the timing marks on the timing belt or timing chain align correctly. If misaligned, disassemble the timing mechanism and realign the timing marks. Try replacing the ignition coil to see if the issue is resolved.
18
4
Share

What to Do When the Braking System Malfunctions?

Solutions for braking system malfunctions: 1. If you notice that the brake pedal does not rise when pressed and there is no resistance, check if the brake fluid is low and top it up promptly. It could also be due to a malfunction in the brake wheel cylinder, pipelines, or connectors, which requires repair. 2. If the braking effect is poor when the brake pedal is pressed all the way down or during continuous braking, it indicates the presence of air in the braking system, necessitating bleeding. 3. If the pedal position is very low and does not rise after being pressed, and it feels stiff, this is caused by a blockage in the master cylinder, which needs to be cleared.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.