What are the precautions for novices driving long distances on highways?

2 Answers
DelAshley
07/24/25 9:26pm
Precautions for novices driving long distances on highways: 1. Pay attention to traffic rules and paste the novice sign; 2. For the first time driving on highways, find an experienced driver to accompany you; 3. Check the vehicle before entering the highway; 4. Be aware of the speed limits, especially the minimum speed; 5. Choose lanes carefully and overtake decisively; 6. Do not follow large vehicles or let them follow you; 7. Pay attention to signs, markings, and warning signs. In case of emergency stops or accidents, ensure safety, exit the highway in advance, and merge lanes early. When you see the roadside signs indicating 1.5 kilometers or 1 kilometer, merge into the outermost lane to prepare. Many accidents are caused by missing exits and forcing lane changes.
Was this review help?
14
5
Share
JesseMarie
08/10/25 2:40pm
As an experienced driver who frequently travels on highways, I believe the most crucial things for beginners are speed control and maintaining a safe distance. With heavy traffic on highways, you should keep at least a 2-second gap and always pay attention to lane-changing signals—don't tailgate. Vehicle preparation is also essential; I always check tire pressure and oil levels before departure, ensuring all lights are functional. Fatigue driving is a big no-no; I take a 15-minute break every two hours to hydrate and stretch. During weather changes, halving your speed in rain or fog is safer. A little tip: avoid peak hours to reduce congestion stress. Remember to pack some snacks and water in the car in case of unexpected delays. If you feel unwell, immediately pull over at a service area—safety first.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What is the actual fuel consumption of Dongfeng Tianlong Flagship 560?

The actual fuel consumption of Dongfeng Tianlong Flagship 560 is approximately 40L per 100 kilometers. Here are the detailed specifications of this vehicle: Basic parameters: Equipped with Volvo 14-speed gearbox and ZF 16-speed transmission, the rear axle is Dongfeng 440 maintenance-free double rear axle with a speed ratio ranging from 2.65 to 4.1, standard with inter-axle differential lock and inter-wheel differential lock. The vehicle's self-weight is as low as 8.8T, with a maximum permissible towing mass of up to 40 tons, and a top speed of over 110Km/h. Engine: Fitted with Cummins ISZ 13-liter engine, with a maximum horsepower of 560Ps and torque up to 2640Nm, capable of adapting to a wider range of working conditions, meeting the power requirements for various scenarios such as starting, accelerating, climbing, and overtaking.
8
1
Share

What Mileage Counts as a New Car?

Generally, a mileage of less than 30 kilometers is considered a new car. Methods to determine if it's a new car: 1. Check the nameplate: Verify the displacement, manufacturing date, chassis number, engine number, etc., on the nameplate. The numbers on the certificate of conformity must match the engine number and chassis number on the car. 2. Body paint: Carefully inspect the paint on all parts, especially areas prone to scratches during transportation. The surface color should be coordinated, uniform, full, smooth, and free of pinholes. 3. Window glass: Check for any damage or scratches on the glass, with a focus on the visual effect of the front windshield. 4. Tires: Inspect the tires for any wear, cracks, or bubbles, and check if the rims are clean, perfect, and free of dents or scratches.
4
4
Share

Is the KAMIQ engine a joint venture product?

The KAMIQ engine is a joint venture product. The entire KAMIQ lineup is equipped with a 1.5-liter naturally aspirated engine, which delivers a maximum power output of 82 kW and a peak torque of 145 N·m. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The KAMIQ is a compact SUV under the ŠKODA brand, with a wheelbase of 2,610 mm and dimensions of 4,390 mm in length, 1,781 mm in width, and 1,593 mm in height. The front suspension of the KAMIQ employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The use of a torsion beam rear suspension helps to expand rear passenger space and trunk capacity, enhancing overall ride comfort.
10
1
Share

How to Deal with Frost on Car Windows in Winter Mornings?

Solutions for frost on car windows in winter mornings: 1. Start the engine and let the vehicle warm up for a while. Then, adjust the fan position to the front glass and turn on the fan. Set it to hot air mode, and the frost will melt automatically after blowing for a while; 2. Use a credit card, bank card, membership card, or any hard card to directly scrape off the frost. These items are much less hard than glass, allowing you to quickly and safely remove the frost without damaging the glass. Frost forms on car windows because the outside temperature is too low, causing the glass temperature to drop. Inside the car, a lot of water vapor attaches to the inner surface of the windshield, leading to frost formation. Based on this principle, after parking at night, don't rush to lock the car. First, open both doors to let the hot air inside the car escape. Generally, ventilating for about five minutes can reduce the temperature difference between the inside and outside of the car, effectively preventing frost on the glass.
1
5
Share

What does the plus and minus sign on D gear mean?

D gear with a plus and minus sign indicates the manual mode of the transmission. First, press the brake and pull the gear lever downward to shift into D gear, then push the lever to the right to engage the manual mode. When you need to shift gears, push the lever forward to upshift by one gear or pull it backward to downshift by one gear. The D gear in an automatic transmission does not have the engine braking function and will continuously shift to higher gears as the speed increases downhill, causing the vehicle to go faster and faster. This requires constant use of the foot brake to control the speed, which can easily lead to overheating and failure of the brakes due to excessive use, posing a significant danger. Therefore, when driving an automatic transmission car on a long downhill slope, never use the D gear to avoid accidents.
2
4
Share

What Causes Abnormal Noise in the Engine Water Pump?

Reasons for abnormal noise in the engine water pump: 1. Damaged water pump bearing; 2. Broken fan blades in the water pump, where high-velocity water flow drives the detached blades to collide; 3. Overheating of the water pump. The self-priming pump is a type of self-priming centrifugal pump, featuring a compact structure, easy operation, stable performance, simple maintenance, high efficiency, long lifespan, and strong self-priming capability. Working principle of the water pump: Before starting the pump, fill the pump casing with water or ensure the casing already contains water. Upon starting, the impeller rotates at high speed, directing the water in the impeller channels toward the volute. This creates a vacuum at the inlet, opening the check valve and allowing air from the suction pipe to enter the pump, then flowing through the impeller channels to the outer edge.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.