What Are the Precautions for Novice Drivers at Night?

1 Answers
SanZoe
07/30/25 7:24am
Precautions for novice drivers at night include: 1. Use lights appropriately—low beams are usually sufficient for illumination at night, and high beams should only be used under special circumstances; 2. Reduce lane changes and overtaking while maintaining a longer safe following distance than during the day, and avoid driving while fatigued. Methods for using lights while driving at night are: 1. When turning at an intersection, alternate between high and low beams at least twice; 2. When driving on roads with low visibility, turn on high beams; 3. When approaching a sharp curve, alternate between high and low beams at least twice; 4. When approaching a slope, alternate between high and low beams at least twice; 5. When approaching a humpback bridge, alternate between high and low beams at least twice.
Was this review help?
20
2
Share
More Forum Discussions

How to Drain Oil from a Sedan?

Steps to drain oil from a sedan: 1. It's not easy to extract oil on a flat surface. To extract oil from a sedan, you can first fill the sedan's fuel tank, then drive it onto a slope. The steeper the slope, the easier it is to extract the oil. After parking, secure the car with the front facing upwards, shift into first gear, and engage the handbrake. 2. Once the car is secured, open the fuel tank cap and insert the pre-prepared hose into the tank, placing it as deep as possible. Use airflow to draw the oil out. 3. When extracting oil, do not use the hose directly. Instead, find a plastic bottle with a slightly larger diameter than the hose. Flatten the bottle beforehand, then tightly connect the bottle mouth to the hose. Use pressure to draw the oil out, then remove the bottle and point the hose end into the oil container. 4. While extracting oil, monitor the oil level in the container. Once enough oil has been collected, lift the hose from the container to let the remaining oil in the hose flow back into the tank, or lift the hose from the car's fuel tank to let all the oil in the hose flow into the container to avoid waste.
10
3
Share

Where is the Tesla small battery located?

Tesla's small battery is located on the chassis of the car. The space occupied by the electric vehicle battery pack is relatively large, so it can only be fixed on the car chassis. Tesla's models include Model S, Model X, Model Y, and Model 3. Taking Tesla's flagship product Model S as an example, it has 7,000 battery cells. The Model S is a mid-to-large-sized car under Tesla, with a body structure of a 5-door, 5-seat hatchback. The vehicle dimensions are 4979mm in length, 1964mm in width, and 1445mm in height, with a wheelbase of 2960mm. In terms of suspension, the Tesla Model S adopts a double-wishbone independent suspension and a multi-link independent suspension.
4
0
Share

Does a Car Consume Fuel When Idling After Starting?

A car does consume fuel when idling after starting, although the fuel consumption is less than when driving. Prolonged idling can damage the car's engine. When the car is started but not moving, it indicates that the engine is in an idle state. Idle state refers to the engine running without load, with the engine speed ranging between 550 to 800 revolutions per minute. If a car idles for an extended period, it can easily lead to carbon buildup in the engine. Both high and low idle speeds are detrimental. A high idle speed can affect the engine's fuel consumption, potentially increasing it, raising the internal temperature of the engine, and accelerating engine wear, thereby reducing the engine's lifespan. Conversely, prolonged low idle speed can cause the car to stall. Stalling can occur in two scenarios: one is stalling during idling, and the other is stalling while the car is in motion.
17
0
Share

What is the Chevrolet Aveo?

Chevrolet Aveo is the Chevrolet Aveo car. Positioning: Positioned between the Spark and Cruze, it comes in both hatchback and sedan versions. It is built on GM's Gamma II small car platform, featuring an excellent suspension system configuration. It adopts a BFI integrated frame structure and a side body made of integrated stamped steel structure, utilizing over 60% high-strength steel. Configuration: The Aveo uses a MacPherson strut front suspension and a torsion beam semi-independent rear suspension with a double-layer, tubular V-shaped beam, making the vehicle lighter and occupying less rear passenger space. The body dimensions are: length 4378mm, width 1735mm, height 1517mm, with a wheelbase of 2525mm.
12
1
Share

Should the Changan CS75 Plus use 92 or 95 octane gasoline?

The Changan CS75 Plus can use 92 octane gasoline. The function of the fuel system is to supply the engine with a certain amount of clean, well-atomized gasoline according to the operating conditions of the engine, so that it can mix with a certain amount of air to form a combustible mixture. The fuel system needs to store a considerable amount of gasoline to ensure that the car has a sufficiently long driving range. The differences between 92 and 95 octane gasoline are as follows: Different anti-knock properties: The gasoline grade represents the anti-knock property, and the higher the grade, the better the anti-knock ability. Different isooctane content: 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline consists of 95% isooctane and 5% n-heptane. The reason why 95 octane gasoline is slightly more expensive is due to the higher proportion of isooctane. Different prices: A tank of 95 octane gasoline is slightly more expensive than a tank of 92 octane gasoline. Relevant information about gasoline: Definition of gasoline: Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled and cracked from petroleum, which can be used as fuel. Important characteristics of gasoline: The important characteristics of gasoline are volatility, stability, anti-knock properties, corrosiveness, and cleanliness.
9
2
Share

What does the code displayed on the Chevrolet Cavalier mean?

The Chevrolet Cavalier code indicates that the oil pressure sensor is damaged and needs to be replaced at a 4S shop as soon as possible. Trigger of the oil pressure sensor: The oil pressure signal indicates that the engine's oil pressure is below the specified value. The ECM considers this a fault and stores the fault in the form of fault code 415. At this time, due to the excessively low oil pressure, the engine's protection function takes effect, forcing the engine's power and speed to decrease, and may even cause the engine to shut down for protection. The oil pressure sensor is installed on the cylinder block, and it is part of the oil pressure sensor circuit. Fault diagnosis of the oil pressure sensor: Check whether the engine control module (ECM) and the harness connector terminals are loose or mismatched, whether the lock tabs are broken, deformed, or damaged, and whether there are faults in the wire connections; check whether the harness is damaged. If no faults are found during the harness inspection, disconnect the engine oil pressure switch, turn on the ignition switch, and move the harness related to the engine oil pressure switch circuit to test the voltage between the engine oil pressure switch connector terminals. If the voltage display changes, it indicates that there is a fault in this part.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.