What Are the Precautions for Novice Drivers?

1 Answers
EmmettFitz
07/25/25 6:55am
Introduction to precautions for novice drivers: 1. Maintain a good driving mindset. Novice drivers often feel nervous, which is not conducive to normal road driving. When people are flustered, they are prone to making wrong judgments. Therefore, novice drivers should adjust their mindset before hitting the road. 2. Strictly adhere to traffic regulations. According to traffic department statistics, over 80% of traffic accidents are caused by violations by one party. Following traffic rules is the most crucial point among the precautions for novice drivers, as it can minimize the probability of traffic accidents. 3. Control the steering wheel properly while driving. Novice drivers must master the five basic principles: starting, stopping, turning, shifting gears, and braking. These principles should be applied flexibly according to actual conditions. 4. Perform car maintenance before departure. Novice drivers must ensure regular car maintenance before driving. Additionally, always check the vehicle's condition before each drive, such as walking around the car to inspect for oil leaks and checking the tire pressure of all four wheels. 5. Be cautious when driving at night. Night driving offers poorer visibility, making it harder to see far ahead, which can easily cause panic among novice drivers. Novice drivers should first ensure they drive slowly at night. If there are streetlights, use low beams. If there are no streetlights and no vehicles ahead, high beams can be used, but they must be switched to low beams when another vehicle approaches. Always be aware of pedestrians and other obstacles on the roadside.
Was this review help?
11
2
Share
More Forum Discussions

Can You Sit in the Car While It's Charging?

Theoretically, you can, but for safety reasons, it's not recommended to sit inside the car during high-voltage charging. This is because the car is connected to a high-voltage interface while charging, and the internal conditions differ from normal operation. Accidents are unpredictable, and the high voltage used during charging makes it unsafe for occupants. The reasons for the noticeable slowdown in charging speed are as follows: 1. Safety considerations: To increase charging speed, many modern electric vehicle chargers feature fast-charging capabilities, typically reaching 80% charge in about half an hour. However, most chargers use high current in this mode, which can easily cause short circuits or overload risks. To reduce danger, the battery temperature must be maintained within a safe range, leading to a significant slowdown in charging speed once the battery reaches around 80%. 2. Extending battery lifespan: Generally, as temperature rises, the chemical reactions inside the battery accelerate, and the chemical activity of the cells diminishes. This manifests as increased internal resistance, reduced output power, and degraded performance. To maintain optimal battery performance, charging speed slows down at around 80% to lower the temperature and delay internal chemical reactions. 3. Cycle life limitations: Typically measured in charge-discharge cycles, lithium-ion batteries gradually degrade with each cycle. After a certain number of cycles, battery performance declines significantly. Excess heat and rising temperatures during charging also affect the battery's cycle life and can trigger unwanted side reactions in the battery's chemistry.
13
4
Share

Shanghai C1 Driver's License Renewal Locations?

You can go to the following places to apply: 1. Location 1: South Hospital of Zhongshan Hospital Affiliated to Fudan University (Hongkou Branch), 1st Floor, Physical Examination Building, No. 921 Tongxin Road, Hongkou District, Tel: 64882638. 2. Location 2: South Hospital of Zhongshan Hospital Affiliated to Fudan University (Jinshan Branch), Physical Examination Center, No. 2901 Caolang Highway, Jinshan District, Tel: 64882638. 3. Location 3: Shanghai Chengkang Outpatient Department, 4th Floor, Building 3, No. 269 Tongxie Road, Changning District, Tel: 61070526. 4. Location 4: Shanghai Electric Power Hospital, 4th Floor, Physical Examination Department, No. 937 Yan'an West Road, Changning District, Tel: 64882638. Penalties for Expired Driver's License: Driving a motor vehicle is prohibited during the expired period, otherwise it will be treated as driving without a license. If the driver's license is expired for less than one year, the driver can renew it at any time, but driving on the road will result in a fine of 200 yuan. If the driver's license is expired for more than one year without renewal, the traffic management department will cancel it according to the law. If the expiration period is less than three years, the driver must retake and pass the subject one exam to restore the driving qualification. Driving on the road during this period will result in a fine ranging from 200 to 2000 yuan. If the driver's license is expired for more than three years, the license will be completely canceled, and the driver must retake the driver's license test to drive again. Otherwise, driving on the road will be treated as driving without a license, resulting in a fine of 2000 yuan and administrative detention for up to 15 days.
17
2
Share

Are the A-pillars of convertibles safe?

Convertible A-pillars are safe. During the design of convertibles, the vulnerability of A-pillars is taken into consideration, and they are reinforced accordingly. The A-pillar, also known as the A-pillar in English, is the connecting pillar between the left and right front sections that links the roof and the front compartment. It is located between the engine compartment and the passenger compartment, above the left and right side mirrors. Location of B-pillar: Between the front and rear seats of the passenger compartment, it is the vertical bar between the two side doors, extending from the roof to the bottom of the car. From the inside, the seatbelt is attached to the B-pillar. Location of C-pillar: On either side of the rear seat headrests. Function of A, B, and C-pillars: The A-pillar, B-pillar, and C-pillar are all critical components that support the structural strength of the vehicle.
9
3
Share

Why Do You Need to Bring Cash When Taking Delivery of a Car?

When taking delivery of a car, you may need to pay handling fees for certain procedures, which is why you are required to bring cash. First, check the production date of the new car: After receiving the keys to the new car, the first thing to do is to check the production date, which is usually indicated on a sticker below the driver's side door or on the vehicle certification. This helps avoid purchasing a stock car. Inspect the car body and interior: Carefully examine the car body for any scratches, paint chips, or damage to the chassis. During transportation from the manufacturer to the 4S store, some vehicles may experience minor scrapes or bumps, especially since most deliveries occur at night. It's important to identify any issues promptly and communicate with the 4S store.
16
2
Share

What are the reasons why the Little Monkey electric vehicle doesn't move when the throttle is applied despite having power?

Issues with battery connection wires, damage to the Hall sensor or controller, or a faulty controller can all cause the Little Monkey electric vehicle not to move when the throttle is applied despite having power. Issues with battery connection wires: Generally, it might be that a connection wire on the battery is loose, or the terminal of a battery is corroded or loose. It is recommended to check if the battery connection wires are loose and simply reconnect them. Poor contact in the controller wiring: The controller is usually fixed under the rear seat and is used to control the entire vehicle's circuit. If the controller is damaged, it can prevent the electric vehicle from operating normally. Locate the controller of the electric vehicle, inspect the thick red and black wires of the controller to see if they are loose or detached. If they are, simply reattach them. If the problem persists, then the issue lies with the motor, and it is necessary to visit a specialized repair shop.
10
0
Share

How to reset the service light on a Peugeot car?

Press the car start button to start the car. Check the car dashboard, and a maintenance reminder will appear. Click the SET button on the multifunction steering wheel to reset it. Place the ignition switch in the ON position, and the "SERVICE" indicator will disappear, indicating the reset is complete.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.